I'm trying to do a motion tween on a movieclip that is selected from an array via the following code:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var toMove;
[code]...
unfortunatly it doesn't seem to be moving the movieclip, nothing happens. If I change toMove to a static name it'll detect it and work properly.
my movieclip button was working perfectly as a motion tween. Can you use shape tweens as movie clip buttons? I just made that change, and kept my code:
[Code]....
i put my MovieClip on frame 1 than i put it on frame 60 and made motion tween between them. that works until i decided to positioning MovieClip at frame 1 with actionscript, i write this at frame one.
[Code]...
created a movieclip with a motion tween and I added it to the stage with the following code: var pop:msgBox = new msgBox; addChild(pop); //the msgBox is the class name of the movieclip and the pop is the name of the instance of it the problem is that the animation isn't played correctly. for instance, I drew a rectangle and converted it to a movieclip symbol and then I reconverted it inside itself to a graphic symbol. I created a motion tween that enlarge the movieclip shape, but when I added it with the above code, it start to animate correctly but over its iteration it start to behave not correctly. it seems that flash pro adding a new instance in each iteration that overlap on the previous one.
View 3 Repliesi made a movie clip with a motion tween wich i added to my stage with actionscript code (with the addChild() property). In het handeling code of the movieclip i put a stop so the motion tween won't play on startup. But how can i start and stop this animation with actionscript code without having to add the movieclip to my timeline?
View 1 RepliesI've been fumbling with this issue for a bit. I've got a lovely little tooltip movieclip that follows the user's mouse for a few seconds before it removes itself. My problem is that if there is one already there I remove it, however, I cannot seem to remove the Motion_Finish event and it still fires and possibly deletes a new tooltip. What I want is to essentially put in a line item such as:
var tween(smallhelp_panel).deleteAll();
I saw a tweenlight function killtweensof(mc); However I've used the tweens I've incorporated below throughout my 30k lines of AS3 code.
Here is my tooltip handler. I call it with a simple
Main_Warning("Please don't forget to save!",5);
My movieclip is a 'smallhelp_panel' and I check if it already exists and remove it. However, the alpha and MOTION_FINISH tweens still exist and cause issues with any new smallhelp_panels.
public function Main_Warning( the_text:String, myTimer:int = 4){
if(smallhelp_panel != null){
stage.removeChild( smallhelp_panel );
[Code] .....
I have a movie clip that is a motion tween with a shape with fade... Now I want to put this mc as a mask .. and showing a part of an image with lot of this mc's. I know that I have to use duplicate movie clip, but the mc as mask isn't working.
View 2 RepliesThere is a movie clip "card" created dynamically through the code. I have a class, and I instanced it and add it to the stage. I need to move the movie clip on the button click, so I created a motion tween and export it to the code. Then I wrote a function and asign it to the button through the event listener. But the movie clip doesn't move. The event fires, but nothing happens.
Code examples:
1. Instance of a movie clip
var card:MovieClip = new Panic();
card.x=456.20;
card.y=77.30;
card.width=285;
card.height=355;
card.n = "IME";
[Code] .....
If I perform a motion tween along a curved path, Flash CS4 does not allow to change the curves to "corner point" or "linear" in the motion editor. URL...
View 2 RepliesI will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 RepliesI am facing a problem in one of my animation with flash CS4 - I have nested a Shape Tween in a Motion tween to get more control over the easers and effects, unfortunately I am not able to view on the timeline of my Motion Tween the action of the Shape tween nested inside.
It only show the first shape of the Shape Tween during the entire Motion Tween and that is really a problem for me because I need to see the final frame result of that Shape tween to be able to position it in a precise way on my scene according to other instances.
[Code]..
I'm making a "master movie" for an assignment and I'm stuck right now. What I've got is an Intro page that will serve at the Parent.swf to load 4 other child swf's upon a mouse click. The problem is I have a theater stage where I tweened an animation to make it appear the curtain on the stage is going up but once it reaches it maximum height....the tween abruptly stops. I want it to HOLD there until a user clicks a button.
How would I make this happen? Here is the page in question: [URL]...
Is there a way to convert a classic tween to a motion tween?
View 0 RepliesHow do I add motion blur to a motion tween?
View 2 RepliesPut 2 identical tweens, 1 motion tween, the other classic tween.Are there any differences in the final weight (Kb) of the resulting .swf file?
View 1 Replieswhether it be text, symbol, a shape that I drew. None of it works. When I create the motion tween the line arrow in the timeline doesn't show up like it should. Here is the extremely simple animation i'm doing. The problem are for the bottom 9 layers starting from frame 80. I converted all of those to graphic symbols and I'm just trying to do a very simple alpha 0-100 while resizing the letters. I've also tested motion tween on very simple shapes and it never works. I just don't get it.
View 3 RepliesDoes anyone can explain, why on the timeline in CS4 I can move only those motion tween which have the same long? Yet, It's without sense.
[Code]...
I'm building a drop down menu in flash CS4. I have followed the directions meticulously...3 times... and still I can't get a mask to accept a motion tween.
View 1 RepliesI am currently using CS4 but taking a class that is using CS3. The problem is I am finding the "motion tween" is not creating a tween. What is the difference between the motion tween in CS3 and CS4.I can get the tween to work if I use the "classic tween" but the instructor is saying I must use the motion tween.
View 4 RepliesIs it possible to make a motion tween (or something) where as the page would start blank and then writing would just start to be laid down..... affectively, scribbling onto the page?
View 3 RepliesI'm trying to get the name of a motiontween in AS3. I have many tweens that call a generic function on MOTION_FINISH.
mainContent3X = new Tween(MainContent3, "x", Strong.easeOut, MainContent3.x, 1750, 1, true);
I need to get the number/name to know what to do. I've tried the following with no luck:
trace(event.currentTarget.toString());
trace(event.currentTarget.name);
Has anybody found a way to ease motion only between keyframes, not the whole animation? In classic u get separate easings.Generally, I want to convert old tween to new for more control, but it seems to be impossible.
View 4 RepliesI created some text, converted into a movie clip and I have three keyframes - 1,5,15.at 1 the text is as it is, at 5 i flip it horizontally, using the transform tool [q key] and at 15 i flip it horizontally it again, so it's normal again And I've put motion tween between both the places. Now when I preview the swf, from 1 to 5 the text animates as it is supposed to clockwise but from 5 to 15 it rotates clockwise
So it covers 1/2 revolution and then traces the same half back to become normal again.What must I do in order to make it swivel in clockwise sense only ?
Im making kind of slideshow for my project; assume every frame is a single slide. all of the frames have eventlisteners for KeyboardEvent.KEY_DOWN event. just like this example:
[Code]...
I've watched the tutorial video's and searched the thread -
I want to delete part of a motion tween ... I only seem to be able to delete all of it.
I am having problems with the scripted Tween as the motion does not always complete and therefore does not let the rest of the script execute. Why these Tweens are not completing? I have a few of them throughout my program and they are all doing the same. I have to "Test Movie" several times before I get lucky and they complete and then the program runs fine. I have them all set to under 1.5 seconds as I read somewhere that there this might happen after this time. I am using IE 8 I'm not sure if that has anything to do with it.
View 3 Repliesin flash professional 8 there is an option for edit motion tween ease graphicallywe can adjust with x and y axisin there any semilar option in flash CS4 professional
i know we can adjust ease with also we can adjust the motion tween also with mouse in the working stage
I have a menu I'm building in Flash, the version with no animations can be seen at [URL]. I'm trying to make the block of text on the left tween in from the left. That block of text is a movie clip made up of three dynamic text boxes. Each text box reads in a variable from a text file. Ideally, what I want to do is have the tweening in the movie clip. However, when I add in a keyframe at any point in the movie clip, the dynamic text will display and animate up to that point and then disappear. Also, to mkae things more annoying, only the first of the three blocks will move at all. I can change the alpha or whatever I want to on that first one, but the others seem to be off limits. Could this be due to the fact that I set the second and third blocks to be just below the title block in action script? Does that interfere with tweening?
View 5 Repliesdo a simple fade in of text with a motion tween. I have entered text, converted to graphic symbol, set alpha channel on frame 1 to 0% and on frame 30 to 100%, the add motion tween. The text simply pops back in at frame 30 with no fade in between 0 and 30 at all. I have text set as static. Is this a Flash bug? I am working with Flash CS3. The same thing happened when I tried to do a zoom with a graphic and I had to break the two objects apart before I got any motion tween between them. This is not working with text, however. Adobe Flash CS3 Mac Pro Tiger 10.4.11
View 5 RepliesI have a motion tweened layer that uses 445 frames. However the actual property change occurs from frames 1 - 360. After fr 360, there are no property changes. When I create a simple ease - ease out, set at 100. This ease shows that it takes 445. When I apply the ease to my properties (x and y specifically). The ease appears to be applied and the movement stops at fr 223. So between 223 and 360 there is no movement. The dash line of the ease in the properties motion editor goes diagonally to 223 then flattens out at the top - indicating no movement. How do I get the ease to apply to all 360 frames, and slowing down up to 360, rather than earlier than that?
View 1 Replies