.Swf No Longer Loading
Aug 11, 2009
I have been working on a flash site for some time now and everything has been fine until today. I edited some of the text, and saved and now the flash will not load, it just sits as a white box. This is the first time I have ever ran into this problem. I checked all of the file destinations and even replaced the .swf with a different .swf file and the second one worked... So this leads me to believe that something horribly wrong happened to the flash file.
View 2 Replies
Similar Posts:
Jul 25, 2011
I have an application written in AS3 that is loading swfs written in AS2. Most of them work fine, except for ones that contain the old AS2 accordion component. Loading one results in it working correctly, but each one that is loaded after it breaks the previous one (the content no longer shows and the mask disappears). It's not just limited to the accordion, any of the AS2 components that came with Flash Pro cause breakage. I've tried loading the swfs to separate movieclips, tried using applicationDomain, tried everything else I can think of. Rewriting the swfs in AS3 is not an option due to circumstances out of my control.
View 2 Replies
Dec 17, 2009
when I click a checkbox in form 2, if i navigate to form 3 using a button then navigate back to form 2 using a button, the checkbox is no longer checked. I tried using a variable to store whether the checkbox is checked or not but I'm having troubles.
View 10 Replies
Nov 14, 2007
I have a portfolio page that I put together with Flash MX.The interface is bsically a chart that has a bunch of buttons on it. These buttons each have a code similar to this;
on (release) {
getURL("javascript:openNewWindow
('file.html','thewin','height=600,width=800,toolbar=no,scrollbar=no,r esizable=no,menubar=no')");
}
This used to work - but not now. Even when I check my browser for pop-up/javascript enabling,it no longer works.
View 3 Replies
Aug 16, 2010
I am editing a flash intro template and I am trying to keep text on the screen longer... how do I extend the amount of time it stays up before flying off the screen?I am a novice obviously, and I am sure there is a very easy solution. Also, when I do figure out how to extend the amount of time a title or text stays up before fading away or flying off, will I have to extend other layers as well to sync everything back up or does it do it automatically
View 1 Replies
Sep 4, 2009
I have my swf in an iframe called 'nav', and when clicking on a nav button I want to change the contents of 'main'
Here's my frameset:
<frameset cols="120,*" frameborder="NO" border="0" framespacing="0">
<frame name="nav" src="nav.html" scrolling="NO" noresize>
<frame name="main" src="welcome.html" scrolling="NO" noresize>
[Code].....
View 1 Replies
Jul 24, 2009
Before Actionscript 3 I did my sounds for my MCs through Linkage but it tells me I can no longer set an identifier for my sounds. What do I do now?
View 2 Replies
Sep 8, 2009
I've heard somewhere that LCDS is no longer baked in into CF9, and LCDS Express will be phased out, is that true?
If I were to start a new CF8.01 + LCDS Express 2.6 project, what are the risks? Should I abandon that plan and go for BlazeDS instead?
View 4 Replies
May 6, 2010
what's the easiest way to cut string in Flex ?I mean, I have a sequence of urls, I want them at most 60 characters length. If they are longer they should be cut and "..." should be added at the end.
<mx:LinkButton label="{bookmarksRepeater.currentItem.name}" click="navigateToURL(new URLRequest(event.currentTarget.label.toString()))" />
View 2 Replies
Nov 16, 2010
I've been using the embed tag for a while and it has been working perfectly up until now. I've got an XML file that I have embedded into my .swf, using
Code:
[Embed(source="nodes.xml", mimeType="application/octet-stream")]
and haven't had any problems. However it has just decided that it no longer wants to compile anymore, giving six errors on this line and this line only:
Quote:
Line 32 1180: Call to a possibly undefined method Embed.
Line 32 1120: Access of undefined property source.
Line 32 1120: Access of undefined property mimeType.
[Code].....
I had added a new function just before this error started appearing, but it had absolutely nothing to do with the embedding and the problem still happens after I comment out everything I added before the error.
When I test it in a new .fla it still works aswell, just no longer in this one.
This is in Flash CS5, ActionScript 3 by the way.
View 0 Replies
Jan 14, 2011
I have a FLV embedded into my timeline and it works just fine. I gave it an instance name of myVideo in the properties panel.I have a couple stop(); commands over the course of the video's timeline and on some of those frames I also want to fade out the FLV, so I added the code:[code]Now, if I try to gotoAndPlay the next frame the main timeline playhead continues on, but my video doesn't. What gives?[code]and this worked fine! I don't get it, why would one property choke the animation and not another? Is there something special with the alpha property?
View 0 Replies
Feb 22, 2011
I have a regular expression in my code. What I want it to do is to check user input. This input should be a string of 9 numbers with spaces between them. So for example "1 2 3 4 5 6 7 8 9" should return true, but also "123 45 2765 23 3456 23 5 456 1" should be true. [code]My problem is that if the strong with number is longer, the usual test method still returns a true. Is there a way to check if the string is longer then this?
View 3 Replies
Aug 3, 2009
I just ran into something pretty interesting, if i attach a sprite and then call startDrag it works great, however.if i set the sprite to say a rotationY of 20 or any value the startDrag no longer works? any solutions to this?
View 6 Replies
Apr 7, 2011
I have an swf that I created that contains links to other pages on our site. I can test this and it works fine. However, I then import that swf into my main fla's library. However, after I add it to the stage I test the main movie and the links that worked before in the imported swf no longer work. This seems like it should be a no brainer but for some reason it just isn't working.
View 12 Replies
Sep 4, 2009
i tried looking here with the keyword 'preloader', to find answers to my problem but I didn't.I'm a freshman AS3 developer....with a portfolio site to launch asap.
I have a movieClip in my library that is exported to AS (external jpg) - it is loaded separately from anything else in my scene (which is disrupting my normal preloader animation). When I simulate the download my preloader doesn't appear in my preview window, and I have no error message either. At first, not sure what the problem was I tried various preloader tutorials online hoping to find a solution.
I only realized later on that my preloader didn't work because of my external jpg.How can I make my preloader (code below) load everything altogether? (elements in my scene + external jpg)
PRELOADER (first frame);
Code: Select allimport flash.display.MovieClip;
import flash.events.ProgressEvent;
[code]...
View 4 Replies
Feb 19, 2010
I've been developing a fairly simple presentation in CS4, AS3, OSX, which runs as a standalone projector.Everything was working for a while, but now for no apparent reason, any file I publish as a projector starts the Flash Player app, but the projector does not appear or play.Older versions that I had already published will play correctly, but if I re-publish them they do not work any more.
View 2 Replies
Mar 26, 2010
I can no longer see my code. I've tried two different .fla files, one I made and one someone sent me, but no luck. Clicking on the first frame on the Actions layer, I either press F9 or right-click and choose actions. The properties panel changes, but the code list window does not open.
View 2 Replies
Jun 18, 2010
I have just very recently downloaded a trail version of Adobe Flash CS5 onto my laptop. The version of windows is Windows XP, and the program itself is running as well as it should.
I went to youtube to see if there were any video tutorials that could help me get started with the program. Unfortunately, right before a video will play, the browser will say there was an error, and close, and then re-try to open the page.
This problem has never happned before I installed Flash, so I can only assume it had something to do with it. Everything else on my system is running smoothly, I even checked every file and processor twice for any signs of adware that I may have picked up accidently.
View 14 Replies
Apr 23, 2011
Should that be avoided due to local scope factor? function resizeDisplay() below no longer works
[Code]...
View 4 Replies
Jul 27, 2010
I have a some Flash CS4 file with some AS3 with under one file name say file1.fla. And it just plays correctly. But as soon as I change the filename to different name such as file2.fla, then it no longer plays. I have to generate many file name with identical content say file3.fla, file4.fla etc. Now simply renaming the fla file name just make it non-playable, as soon as I hit CTRL+ENTER, nothing but white background shows up. It is fcking driving me crazy, WTF is wrong with this software?
View 2 Replies
Jul 4, 2011
I have a movieClip in my library that is exported to AS (external jpg) - it is loaded separately from anything else in my scene (which is disrupting my normal preloader animation). When I simulate the download my preloader doesn't appear in my preview window, and I have no error message either. I only realized later on that my preloader didn't work because of my external jpg. How can I make my preloader (code below) load everything altogether? (elements in my scene + external jpg)
PRELOADER (first frame);
Code:
Select allimport flash.display.MovieClip;
import flash.events.ProgressEvent;
addEventListener(Event.ENTER_FRAME, loaderF);
function loaderF(e:Event):void {
var toLoad:Number=loaderInfo.bytesTotal;
[Code] .....
View 2 Replies
May 7, 2006
The site I'm building has seperate swf's for each page...and I have the external swfs loading into the site. But my problem is that when I am on one of the external swf pages that has been loaded, and it has buttons on it, none of these buttons work. They work when I test the swf by itself, but once my main movie loads the swf into the site, the buttons within the swf no longer work.
View 1 Replies
Nov 17, 2008
I have several flash games and quizzes that I now want to put together as a collection on a CD ROM as a bumper pack to buy. I wasn't sure of the best way to do that but I figured that I can create a flash file with individuals buttons on that when pressed loads that SWF's into the main page and plays which I'll export as a standalone player.
Sound good that's just what I wanted, only problem now is that the sound objects that are in the various games no longer play What do I need to do so that they will play as they do when I play each SWF on their own? (Hopefully without too much re-programming of the original games as there are quite a few)
View 17 Replies
Dec 1, 2008
We changed atoms in our newspaper this Monday, but the new .atom feeds no longer parsing using me old .rss code.
View 2 Replies
Nov 5, 2009
I have a bit of code in a flash assignment I am doing for uni and I have come across a 1060 warning that Image is no longer supported.
for each(var img:Object in images){
var image:Image = new Image(img.image1, img.image2);
image.x = img.x; image.y = img.y;
addChild(image);
}
View 2 Replies
Jun 15, 2010
I have a hitTest function that keeps checking if two objects contact each other. I'm currently using the following code:
function checkOverlap():Void {
if(doorHit.hitTest(player)){[code]....
The message1 MC has a bunch of links that do stuff within the message1 MC, but because the interval keeps running it keeps resetting the message1 MC. Is there any way to pause the interval for as long as the player MC is in contact with the doorHit MC then unpause it when the two MCs are no longer touching? I've thought about making it so that message1 is already on the stage but outside the viewable area. The hitTest function would then move the message1 MC back and forth. But, I want to figure this out so I can also pause functions when the movie moves to a different frame then unpauses when it comes back to the frame with the hitTest. So, is there a way to make this work?
View 10 Replies
Sep 18, 2010
I'm trying to make straight lines grow out of a stationary dot, like veins. I've tried shape tween, but it only works for shapes, not lines. I'd just get a blank workspace when I hit play. I've also tried motion tween, but I can't get the line to grow continuously to a point.
View 11 Replies
Mar 29, 2012
Installed the new flash player and all of a sudden my flv audio no longer played in an existing media player built using the FLVPlayback component.
Finally figured out that if I change the FLVPlayback component parameter "maintainAspectRaion" from false to true, the audio will play.
View 11 Replies
Apr 2, 2012
Audio flvs that previously would play fine no longer play. I get "NetStream.Play.Failed".This occurs when progressively playing over HTTP, i.e. starting NetConnection.connect(null) and then NetStream.play("http://url_of_my_flv");Regular RTMP playback still works.So, I've seen two posts with similar issues in the last day or so:
View 1 Replies
Nov 22, 2011
I am having a problem with my build. When I add a valid statement to the code it will no longer complie and it fails with errors from an unrelated file.I experience these issues building with ant or building with mxmlc on the command line.Adding a valid statement to an myLittleBox.mxml will cause this error.All the errors are in ViewerMain.mxml.This file is not the main mxml file but it is referenced from the main mxml file.Before changing myLittleBox.mxml ViewerMain.mxml had no compile errors.There are no errors related to myLittleBox.mxml myLittleBox. mxml has no references to ViewerMain and only uses spark components ViewerMain.mxml has no direct references to myLittleBox.mxml. Its children's children's children would have a reference to myLittleBox.mxml.The valid statement added to myLittleBox.mxml could be many things (they all break it) including a comment.[code]
I noticed that the Model was using a constant in Viewer 1.This was causing all of Viewer 1 to be built when Viewer 2 is built.I moved the constant from Viewer 1 to the the Model (where it really should have been anyways) and my project built successfully since Viewer 1 and Viewer 2 were not being built at the same time.It makes sense that this would resolve the issue however this is just resolving a symptom of the issue.I am still very curious what was causing the the compiler to fail on ViewerMain.mxml when I add a comment to myLittleBox.mxml.I guess that it will remain a mystery for now.
View 1 Replies
