I would like to use a command to direct a swf to a default path is the file in my xml line does not exist. Here's the ecisting line with file path:
<item itemPath="video/101act02.jpg" itemName="Video 1" videoPath="101act02.flv">
Is there a way to call up another file if the videopath is not there?
I have a series of AS3 classes that I want to install into the default directory that Flash looks for when, in code, one writes: import com.flashsim.FStEng.Three.*;
In AS2, there is the Classes/ directory within the Configuration folder. Very easy, nice. In AS3, that folder is not consulted, and I understand the Flash IDE does some kind of internal mapping.
I have created a SWC and added it to my Library path. However, I would like to package the SWC in a (code-only) component and put it in a folder that Flash is, by default, looking at to consult swc's. Alternatively, if there were an "include" directory, I could put the as files. However, when I try to put the SWC in the Configuration folder's Libraries, or ActionScript 3.0/libs (the "libs" I had to create), or I put the as files in the Include folder, my Flash code cannot access the stuff being imported.
I have a doubt with android devices.In my application i have given a path to store my db files and that path is
File.applicationStorageDirectory.resolvePath("LocalDB10.db");
I want to know where this path available in android device or else is there some other path i have to specify.
I have a HTML stageholder, this calls a "mainMenu.swf" which essentially controls my site. This "mainMenu.swf" has three buttons: intro, portfolio and contact which are all individual movies. So far, all good... When I have clicked into the portfolio section a 3x3 grid loads with nine buttons, one of these buttons loads a preview page for four movies, when I load one of these movies it plays fine. What is the path to get the loadMovie command to jump back to the 3x3 grid page from this movie? Basically, what is the command to jump up a directory when using loadMovie?
[Code]....
Actually I am the application is for recoeding live stream. The recorded videos are placing in the folder named live_test as specififed above.But I want to change this path. There is a folder named public in the root directory. In the "public" folder we have a folder named Recorded_Videos, I need to place the recorded videos on this folder. How can I do this.Another issue that occurs while recording is NetStream.Record.noAccess. This is occuring while the recorded video is placing on client's flash media server with the path that i specified above. But when i running it in the local flash media server(developer version), its working well. The recorded files are placed on live_test folder. In the client's server the stream is not recording, instead its showing an error like "NetStream.Record.noAccess". The code that I am using for recording live stream is follows:
stop();
var nc = new NetConnection();var CommPage = 'http://68.233.8.57/videos/destination';System.security.allowDomain(CommPage);
[code]....
The last time I did a motion path in Flash CS4 I was able to locate the Orient to Path "command" on the properties window.
I have drawn my path and placed the symbol on the beginning of that path and can not for the life of me locate the Orient to Path command ,
We had FMS2 installed before and the paths to all our videos are like rtmp://ServerName/sites/.... (the default path on FMS2) Now we upgrade to FMS4 and we would like to keep these paths the same because we have many HTMLs that reference these videos. However, the default path on FMS4 is rtmp://ServerName/vod/... Is there a way to change "vod" to "sites"?
I tried to change VOD_COMMON_DIR in fms.ini from /install_dir/webroot/vod to /install_dir/webroot/sites, and also changed the document root in httpd.conf, but rtmp://ServerName/sites/ is still not working.
Well i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 RepliesSo I've created a script where a mc is clicked on and the player can draw a path using the mouse. I'm trying to figure out how I can get the mc to follow the path drawn out by the player's mouse and when the player clicks again, it erases all of the path.my code is below
Code:
import flash.display.Sprite;
import flash.events.MouseEvent;[code].....
the same class is passed to the mxmlc compiler in SWF library as a symbol linkage class and again in a source-path. But the compiler uses the definition from the source-path so creating new instance of that class won't create new instance of the library symbol. How do I tell the compiler to prefer the definition linked to the symbol (the one dfrom SWC)?
I have my design assets in an FLA file and they are linked to classes (e.g. [URL]. Then I export those assets to a SWC library and pass it to the compiler. Now when I create an instance of the class (new MyAsset();) it will be a new instance of the library object.
But there are other classes too in the source folder (e.g. "com.myproject.model.*" so I need to pass the source folder to the compiler too. And that is the problem, now the compiler will use the MyAsset.as definition from the source path, not from the SWC where it is assigned to the library object so if I create new instance of MyAsset now it won't duplicate the library object.
Here's what i'm trying to do: Hide a MC depending on the path variable as:
[Code]...
Well that doesn't work, for some reason, i can't use a string as a multiple level path..
I was wondering if it possible to write up some AS that will take line paths that you have drawn and convert them into a Path object? For example say you drew a jagged line from left to write, would there be a way to have AS convert that into a Path object.
View 11 RepliesIs it possible to draw out a path in the flash editor, set its visibility to hidden, and use this path data to animate objects in AS3?
View 1 Repliesi have a quick question what is the syntax if u want to use parametrs to define a path inside a path? i mean:
[CODE]...
does anyone know.... it's very important!
This is a head scratcher. Why would a root relative path cause a Security Sandbox error.. but an absolute path to the exact same path work fine..
[Code]...
I'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesI am displaying some flash content on a fairly standard page. This works really well when the flash, xml file and html page are sitting together in the same directory.url...However, I want to display that same content in another page which is deeper inside the site but outside of the directory that houses the .swf and .xml files as well as the assets.[code]The js files are loading properly but the flash content is not, so I could use a little help getting that sorted out.
View 1 RepliesWhat does _level0,_parent and _root mean in flash?What's the difference between absolute path and relative path?
View 1 Repliessome time when i visit some site i find the Url changing when press any button and the page never change also the main flash movie is still in the page . in the same time you can reach that movie or that section by using the URL directly ..for example :the link in shown like this [URL] in this case it will show the Contact form Movie in the main movie or [URL] in this it will show the frist main movie [URL]what i think in this case when you hit the button it will Load an external SWF Movie to the main Movie and change the URL in sasme time .
View 2 RepliesI am coming from flash to flashbuilder I have a directory, AS3_classes_dir, on my computer that stores all of my classes, including my greensock and papervision packages. In every flash app that I make I include that directory in the Source Path, so that I can import whatever I may need. Compiling in flash (using ctrl/enter) takes very little time; only the classes that are specifically imported are compiled.So today I did that in flashbuilder, included AS3_classes_dir via Flex Build Path/Source Path ... but now the compile time are a couple of minutes, even though I am not even importing ANY of the classes from within.
View 2 RepliesI need to start using AS3 for my job. So, I have gotten a great deal of help setting up classes with another co-worker's help and a myriad of tuts. Basically, What I need to do is, set up an XML navigation/subnav (got it), and use those links to populate a series of checkboxes. These check boxes will then be used to populate text in a dynamic text field (got that ready to rock). For example, of the user selects in the nav Agreement > TOC, they might get presented with 4 options:
Told and Agreed
Told and Disagreed
Lost Connection before Agreement
Was Not Told - Cancelled
How would I use XML to direct the MC that holds the check boxes (in some cases, close to 50 of them) to the right frame? I can pull from an XML doc, sure, but have never had the need to use it to run a movie clip before.
Here's the XML I'm basing this off of:
Code: Select all<?xml version="1.0" encoding="utf-8"?>
<menu_content>
<level style = "main.xml">
[code]....
So, in this example, How would I get "Balance" to go to the right frame in my (for the sake of argument) checkBox_MC ?
Basicly, as the title says, i am stuck trying to make a button take me to a different scene.i know what code i will use (Below) but after i have converted object to symbol it doesnt let me put as onto the button.(my code)
on (release) { gotoAndPlay("Scene 2", 1);}
I'm using FMS 3.5 to record streams to the server as flv files, and would like the ability to directly download those generated flv files. Assuming these files are sitting in my applications/recorder/streams/_definst_ directory, how can I open up this directory to allow direct download via a url? Something like http://<ip ddress>/applications/recorder/streams/myfile.flv. I'm guessing this is just something that I need to put into one of the configuration files, but I'm having a bit of trouble figuring this one out.
View 3 RepliesNeed to connect to database file (.mdb) via flash ( as2 or as3 ) directly, applicable ?
View 6 Repliesi need to connect to database ( access database file ) by flash without sever-side language
View 6 RepliesDidn't try to install 2004/2005 software until now, which REQUIRES by all means SPECIFICALY Flash Player 7 before continuing installation Tried with latest version of FP but to not avail does not proceed with installation till FP 7 is in HD first.
View 1 RepliesMy apologies if this has been fully addressed before, but I've read through several other threads and still can't seem to get my file to work.
My actionscript code is at the bottom of this message. I created it using instructions from the Adobe website: [URL]..
I believe I have all of my objects set to the correct type of symbol (button) and all of my instances are named appropriately (see screenshot here:
[Code]...
Can someone please help me by providing the "Direct Url" for playing metacafe videos in a div.
View 1 RepliesWe all know that it's impossible to do native print in a browser that bypasses the browser's print dialog, however, we have the need to do a direct print, ideally where we could also select a particular printer, and other settings programmatically.
I know that ActiveX plug-ins exist that do this, however, we all know that ActiveX plug-ins only work in IE. Is there an existing plug-in, either in Flash or Silverlight that allows us to programmatically set printer properties and then direct print without opening the browser's native dialog?