ActionScript 2.0 :: Applying Blur To AttachMovie() Instances?
Mar 3, 2010
I'm attaching two movie clips, with a blur filter applied. Problem is, I'm only able to get one of them to render the blur.
Code:
var blur:BlurFilter = new BlurFilter(8, 8, 2);
var blur1:BlurFilter= blur;
attachMovie("blucirc","blucirc",_root.table.getNextHighestDepth(),{_x:211.0, _y:340, _xscale:150, _yscale:220});
this.blucirc.filters = [blur];
[code]...
I've tried... with and without the .this tags, along with just using [blur] for both before trying to create [blur1] for the second application...
View 1 Replies
Similar Posts:
May 14, 2011
I am using to blur an image using BitmapData. The function is called on a Slider_changeHandler(event:Event):voidevent and the value of the slider is passed to the function as blurvalue.The problem is the function works but seems to be cummalative (if that's the correct word!), that is, suppose I slide it to the maximum and after that try to reduce the blur by sliding it back towards the front the blur still keeps increasing. How do I make it to work so when I will slide it up blur increases and when I slide it back blur decreases and when slider is at 0, no blur is applied.[code]
View 2 Replies
Feb 3, 2009
Is it possible in as3 to code a jpeg/psd to ease into being blurred, and then ease back out. With just an un-blurred picture? With a blurred and unblurred picture? Shape tween takes too much processing power to transistion good.
View 2 Replies
Dec 10, 2008
Problem 1: Flash crashes when a Blur filter is applied to a TextLine object.
Correction: It was not the Blur filter but this line, which caused a crash:
trace(tb.findNextWordBoundary(5));
whereby tb is a TextBlock element.
View 21 Replies
Aug 27, 2009
I have the following code on frame1 of my movie that I want to apply to multiple instances of the same movie clip:
mainClip_mc.subClip1_mc.specifiedClip_mc.onPress = function () {
//code begins
SpecifiedClip_mc exists in subClip1 through 4. Is there a way to do this once without having to say:
mainClip_mc.subClip2_mc.specifiedClip_mc.onPress = function () {
//same code
mainClip_mc.subClip3_mc.specifiedClip_mc.onPress = function () {
//same code
mainClip_mc.subClip4_mc.specifiedClip_mc.onPress = function () {
//same code
Essentially, specifiedClip_mc's parent clip is what's throwing me here. The code to be applied to specifiedClip_mc is identical and I'm not going the correct route by doing this the long repetitive way.
View 3 Replies
Nov 12, 2009
I was just wondering if there is a way to simplify this code. I have 3 identical movie clips and I use actionscript to alter the color to the same color. Right now I use 3 different colorTransform variables. Could I just use one since its all the same color? How would it look like.
So far, naming all the movie clips the same instance name did not work. Is there a better way?
Code:
var color1:ColorTransform = button1.transform.colorTransform;
color1.color = 0x99628B;
button1.transform.colorTransform = color1;
[Code].....
View 0 Replies
Jun 8, 2007
I have a situation where I create many instances of an MC, one for each node in an XML file (using a for loop), using attachMovie.
Code:
var photo_mc = _root.center_mc.photosLevel1_mc.attachMovie("photoFrame_mc", photoName, itemCount);
[code].....
View 7 Replies
May 15, 2008
I'm making a gallery using XML data and loading the information into a mc instance that are in turn being attached to the stage via linkage id. My question is this: I need to make all of those instances fade out with a function, and I have created a for loop to do this, however it is not working.. Any suggestions on how to make it work?
[Code]...
View 2 Replies
Oct 31, 2006
Okay, here is what I am trying to do, and I have attempted it several different ways. I would like to generate a grid of squares (movieclip `clip_Square` with Export for AS Linkage). The grid generates just fine 10x10, as expected. However, in addition to having this grid, I would like to be able to reference properties of each individual square when they are clicked on. Unfortunately, the function only references the last movieclip, not the movieclip being clicked (onMouseUp).
And if you replace txtDebug.text = "Square_"+i; with trace(this._name);, the output window displays the names of every square when you click one. What am I doing wrong? Is there a tutorial someone could point me towards..
[Code]...
View 3 Replies
Jun 21, 2011
I am looking for some help on a specific effect. I was pretty good in the old days in flash but I have fallen behind badly and the new action script and such is making my head spin a bit. The effect I am looking to do is like the FETblur,first one on the page, [URL]...
View 1 Replies
Jan 12, 2009
I've searched every possible actionscript forum for this and i cant seem to find it. How can i create an "area" of blur which blurs everything beneath it?Like some kind of masked blur effekt?
View 0 Replies
Aug 19, 2011
I'm trying to do this as a bit of a transition. It's always the same movieclip.I just want to give it a duration, actually the same duration as something else I have going on, so I can reuse the variable "fadeDuration"Then I just want to set the maximum blur amount.I have no idea how to go about this. I found two things online, but one looked to be using a plugin, and the other was missing all class definitions and probably asuming you knew which parts were declared at other spots.
View 1 Replies
Sep 14, 2009
I couldn't find anything to directly answer my question online, so I thought I'd post here.
I have a CSS file, and an XML file. Both are loading fine, but the flash isn't applying the CSS to the XML nodes I assign.
ActionScript:
Code:
district1_BTN.onRelease = function() {
descText.text = Quotations.firstChild.childNodes[0].childNodes[0].firstChild;
for(i=0; i<Quotations.firstChild.childNodes[0].childNodes[1].childNodes.length; i++)
[Code]......
View 3 Replies
Sep 3, 2009
I have a short TEXT that I turned into a symbol, it is a MovieClip on the stage. I applied a preset motion of blur fly in to it and it does fly in but does not blur. I tried to use the motion editor to increase a blur to 255 but even when I add it on the initial keyframe, there is NO blur.
View 10 Replies
Nov 10, 2009
on a project in Flash CS4 for Windows. I have an object on a layer that moves separately at different times of the animation (all one large motion tween). I'm attempting to apply an ease to just one leg of that motion, but instead, when I choose an ease setting in the motion editor, the ease is applied to the entire tween (so it affects the stationary frames too!). Is there a way to apply an ease to a single span of motion instead of the entire motion tween?Alternatively (if it's not possible), is there an easy workflow for breaking-up a motion tween in to separate motion tweens while maintaining the position of the object in between the motion tweens? (I don't want to use the frame-by-frame animation conversion option I've seen.)
View 1 Replies
Jun 9, 2010
Applying CSS to XML data?Here is my relevant code:
CSS:
@charset "utf-8";
/* CSS Document */
p {
font-family:Arial;
[code]....
View 3 Replies
Apr 27, 2011
Using AS3 I am dynamically creating, sizing, positioning and formatting a textfield. I am dynamically setting the content of the textfield from the contents of an xml file. I am trying to use the bold tag and noticed that it is not working. After a bit of searching the best I could come up with is "Flash CS4 tag in with htmlText". Bottom line: I have to embed an emboldened fontface.
As an example, let's say I want to use Tahoma. In my .fla file (using Flash CS4) I embed Tahoma and export it for use in actionscript. This lets me use Tahoma as a font in my textfield. If I try to use the b tag (textfield.htmlText="not bold, <b>bold</b>";) the bold text does not get emboldened. Based on the above question I have now embedded the Bold version of Tahoma as well.
How do I link the bold version of Tahoma with the regular version of Tahoma so that when using the bold tag I get bold text in my textfield?
View 2 Replies
Apr 17, 2010
I am using action script 3 and need to know how to apply more than 1 action to a frame label, ie; I have 5 pages of images and have actions coded as follows:
btn1.addEventListener(MouseEvent.CLICK,play1);
function play1(event:MouseEvent):void{
gotoAndStop("1Lrg");
[Code]....
code continues like this for all the buttons (84 thumbnail images), so they will open a larger image when clicked. So what I now need to do is connect the side navigation buttons to go to the relevant page (frame) when clicked...the problem I'm having is that it is causing duplications in the code ie; I now have, for instance thumbnail (btn4) calling frame 4, but I also need a side navigation button to call this frame.
View 4 Replies
Oct 26, 2009
How to make an object or pic in a webpage slowly blur when mouse overed ?
View 21 Replies
Jul 15, 2009
How to show blur effect in SVG. i have to draw a line with blur effect and then convert it to SVG. i know to convert in a line SVG but i sont know how to show blur effect
View 1 Replies
Apr 19, 2010
Is it possible to blur the edges of a movieClip, and only the edges? If I use the blur filter, It blurs the entire image, not just the edges.
Basically, I have a flv file within a movieClip, and I need the edges of the video to look feathered.
View 5 Replies
May 14, 2010
I'm not that great with Actionscript 3.0, so naturally I have an hurdle to leap.
I using the 3D Carousel from flashcomponents.net and I need to figure out how to get the images blur when they are not the front focal on the Carousel. I tried an onRelease (which works to un-blur it), but I didn't know what else to pair it with so when I click on another object it blurs and goes to the back. I don't want it to blur when I roll off, only when another object is clicked.
View 1 Replies
Mar 18, 2011
I have text that I would like to come in to the stage from the side, but I would like it to be a horizontal blur like it is fast, then unblur to a sharp text. Is this something that I can do in all within Flash?
View 1 Replies
Oct 21, 2010
I have just made a flash animation with various amazing effect. Now i have a question: How to Make Blur Effect in Flash
View 1 Replies
Jul 23, 2010
How to blur 3d object? (Papervision 3d) And save created new object as new 3d model? (can help in sky/clouds generation)Like in 2d picture I've turn rectangel intu some blury structure
View 3 Replies
May 3, 2008
How do make links blur once you rollover the one you want? Example: [URL] (You see how once you rollover a cellphone the others just blur and shrink?)
View 2 Replies
Mar 19, 2009
i've created a movieclip that i'm applying a simple blur filter to and in Flash when i play the timeline it runs with no problems although when i publish the movie the blur doesn't display - i've run out of ideas about why this could be! I've looked online and can't find any suggestions either - does anyone know what i'm doing wrong?
View 1 Replies
May 8, 2009
I have created a video for my flash application, convert it into a flv file.Now, I have imported it into flash in a layer, then I have created a new layer where I would yo place a mask with gaussia blur. You ca see example in the pic.I draw a mask into flash, converted it into a movieclip and assign to it a gaussian blur from the filter panel. But when I send the fla in execution (Ctrl+Enter), the video appear through the mask, but this one have not gaussian blur filter applied.
View 2 Replies
Oct 17, 2009
I was wondering if it is possible to blur something that is drawn dynamically? I have a dynamic line that zig zags, but when I attempt to put a blur action on to it, it does not appear blurred. Does anyone have an idea how to get this line to look blurred? (I'm trying to achieve a spray paint effect).
[Code]...
View 2 Replies
Oct 29, 2009
I've got a strange problem with the blur tool. I have a movie clip that i have added a motion tween to and applied a blur to it - so the movie clip image blurs as it moves. This was working perfectly when i first tested it and as i've continued with the creating the flash file and re-tested for some reason the blur is no longer displaying. It's strange as it shows as blurred in the Flash file i'm editing but when i press F12 to display in a SWF it's not blurring. I've attached the file i'm working on
View 2 Replies
