ActionScript 2.0 :: Array Is Splicing For No Reason?
Sep 15, 2006Code:
var remoteListArray:Array = new Array();
var listArray:Array = new Array('a0','b1','c2','d3','e4')
[code].....
Similar Posts:
ActionScript 3.0 :: Array And Splicing Items From Array?
Oct 5, 2009I am working on trying to collect data within an array (which works) and this data is collected when a button is pressed or selected. I also want the ability to remove an item from the array if the button is pressed again. Currently, I have these buttons dynamically generated and everything works well. The buttons have ids applied to them. SO what I am trying to get working is, if I select button 0, 2, 3 (0 indexing), the data array created holds [A., C., D.]. I want to remove A. after I click button 0. Instead, it seems to cause problems. What I am doing wrong with splicing??? trace statement:
A. items so far selected
selected items are: 0
A.,C. items so far selected
[code].....
ActionScript 3.0 :: Splicing An Array On The Main Timeline?
Jun 2, 2010have an missileContainer array on the main timeline which I use to store the missile info in for collision detection. I use a for loop go to through the array every frame and check if it's hitting an asteroid. Everything there works fine, but in the missile's class I have a destroy function which removes the missile if it goes beyond the stage boundaries. However, I need to splice it from the missileContainer array on the main timeline, too. But I can't seem to access the missileContainer array from the class no matter what I try.
View 5 RepliesActionScript 3.0 :: Splicing An Array On The Main Timeline From Within A Movieclip
Feb 16, 2011i am trying to splice data to an array which is on the main timeline by using code placed in a timeline within a movieclip and no matter what i try i dont seem to be able to do it i am an absolute beginner Code on timeline
[Code]...
Flash :: Efficiently Splicing Items From An Array Using Flex?
Aug 14, 2009I have overcome a problem, but my solution seems really inefficient and clunky. Please consider this problem:
I have an array collection with articles in.
This array collection is filtered to a currently selected article category.
There is a cursor bound to a view that shows the current article. When a category is deleted I need to delete orphened articles, I can't use the cursor or collection without affecting the views as they are bound.
[Code]...
ActionScript 3.0 :: MovieClip Array Splicing - Error #1010: A Term Is Undefined And Has No Properties
Sep 28, 2009EDIT: I'm using CS4 I'm receiving this error: TypeError: Error #1010: A term is undefined and has no properties. at Main_fla::function_holder_mc_16/cleanList()
[Code]...
You can find my file at: [URL] Below is my function to clean my list. That part works - however for some reason I'm getting errors...
[Code]...
ActionScript 2.0 :: Splicing And Objects Don't Mix?
Oct 9, 2006While trying to pass objects back and forth between two arrays, I discovered a problem (after a long time of debugging). Here's the simplified code with the last line being the problem
Code:
var one_arr:Array = [];
var two_arr:Array = [];
var temp_obj = {
test: 'value'
[Code]...
ActionScript 3.0 :: Splicing - Adding When Want To Remove?
Jun 7, 2011vector of characterItems with type item -compares the item passed in with that of the item in the characters items and removes it if the item matches - is this code adding or will it remove? and I don't like the number(item), 1 it seems wrong to me.
public function disposeItem(itemUsed:String):Boolean
item = itemUsed
for (var i:int = 0; i < characterItem.length; i++)
[code]....
ActionScript 3.0 :: The Reason For The Different Behavior Of The Object
Aug 1, 2011I should like to understand the cause different behaviour of the metod "drawPath" in this situations:
[code]...
If move comments on other metod ".drawPath(" two color will available.
Professional :: Flash Closes For No Reason
Feb 28, 2012For some reason my flash program closes on me. The strange thing is, it is only 2 MB. I have a good amount of shapehits in it as well. Would that cause it to crash?
View 1 RepliesActionScript 3.0 :: Function Getting Called Twice For Some Reason?
Jul 10, 2009I've got a function 'fullReset' which resets the stage and places several movieclips (which are balls) back to a starting area. Within this function is a call to the 'unlockBallfunction within the Ball class (see bottom of code below).
ActionScript Code:
private function fullReset(event:Event):void
trace("RESET BUTTON HIT");
[code].....
ActionScript 2.0 :: MovieClip Gets Deleted For No Reason?
May 4, 2008I'll cut to the chase, here's my code:
Code:
function loadThumbs(){
for (var i = 1; i <= totalImages; i++){
[code].....
ActionScript 3.0 :: Error For Absolutely No Reason
Jul 23, 2009TypeError: Error #1010: A term is undefined and has no properties.
I get the above error when I run the below code:
[Code]...
ActionScript 3.0 :: SWF Behaviour Changes For No Apparent Reason
Sep 30, 2010I have several two-sided ecards made with Papervision and TweenLite to flip them over.A couple of days ago the "flip" animation changed behaviour. This is in ecards I made several months ago. The ecards work OK but the PPV object is not positioned correctly.On the server, in IE the object is displaced to right and down by about 20 px. In FF it is displaced to up and left by about 10 px.In Chrome and Safari the display is OK.(Just to confuse you further, the display in FF is OK on my localhost).This effect seems to be local to my PC.
I have scanned for malware etc twice but nothing. I have the latest Flash player and browsers.
ActionScript 3.0 :: Cant Retrieve Data For Some Reason?
Mar 7, 2012I call the constructor from a fla file but i cant get a hold of the GamaDataArray via the getGameData() Function it keeps saying that the GameDataArray is Empty, but if i trace within the class it works, when i go to the fla file it says its empty. Can somebody please tell me what i am missing, i know its something super small
[Code]...
Professional :: Unload Movie Not Working For Some Reason?
May 19, 2010im having troubles unloading a swf file that is 2 levels above my main movie. Basically I have a main movie and I have actionscript on the timeline which corresponds to a button which loads a swf (eg my web portfolio work):
digitalbut.onRelease = function() {disableBtns();_root.createEmptyMovieClip("container",1);loadMovie("Digital/Digital_2.swf","container");container._x = -22 ;container._y = 40 ;
This all works....Then in this swf I have another button which again loads another swf on top to show a particular piece of work and the code on the timeline to correspond to the button is:
[Code]....
This works also....but I come into problems when I want to create a button in this third swf file which then closes this Dior.swf so you are left with the bottom two still showing. I already have a close button on the Digital.swf which works a charm to get you back to the main movie and the code for this is:
[Code]....
ActionScript 2.0 :: Unload Movie Not Working For Some Reason?
May 19, 2010im having troubles unloading a swf file that is 2 levels above my main movie. Basically I have a main movie and I have actionscript on the timeline which corresponds to a button which loads a swf (eg my web portfolio work):
[Code]...
Then in this swf I have another button which again loads another swf on top to show a particular piece of work and the code on the timeline to correspond to the button is:
[Code]...
ActionScript 3.0 :: Reason To Set Max Simultaneous Loader Connections?
Jun 26, 2010I'm learning on how to make que loader system. I'm loading in 30 images at once when the swf loads onto stage that contains moderate tween animations. I was wondering would I get better performance if I only allowed to load 5 images at once then next set 5 ect ect. rather than to load 30 images at once? I can't tell because my computer is very good so I can't hardly tell. Is this common practice?
View 2 RepliesActionscript 2.0 :: XML Slideshow Loads Random For Some Reason
Mar 18, 2010Testing locally works fine but as soon as its on a server - published live - the images load random. It loads fine when you publish in flash.
Here is the code and below is the file she sent me.
Code: Select allthis._lockroot = true;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myShowXML = new XML();
[Code]......
ActionScript 3.0 :: Last Character Of File Names Being Deleted For Some Reason?
May 1, 2010I created an input text box, and depending on what the user enters, it will create a file with that same name. However, for some reason, it's deleting the last character of the filename when it creates the file. For example, if you type "House" in the input text box, then the file that it will create will say "Hous.txt"What is causing this and how can it be fixed?
View 7 RepliesProfessional :: Movie Clip Stops Playing For No Reason?
Mar 9, 2012I am making a banner that has multiple movie clips sharing the same area, creating different rainbow effects when different areas (invisible buttons) are moused over.
First of all I couldn't figure out if there was a way to have one invisible button over the whole area that changed to a different colored effect with each mouse over (first mouse over the black and whites would change to reds, second would change it to blues, third would change it to browns, etc.). Since I couldn't figure this out I settled on creating three buttons covering a third of the banner each, so when the mouse passes over one button it changes to reds, over another button it changes to blues, over the third it changes to browns.
The effects are movie clips where each frame has another stripe changing color so it goes in a wave effect from one to the next, and then goes back to white and black in the same manner. The first frame of each movie clip I had to turn into a nested movie clip so I could turn the alpha to 0, since I was going to have these color effect movie clips on top of one another in the main timeline on different layers, and so you could see the effect even if that color layer wasn't on top. I used the same nested movie clip with zero alpha for the first frame of each color effect clip (reds movie clip, blues movie clip, etc), so I dont' know if that's an issue.
Anyway, it seemed to work fine for a while, but after working on it for a while longer (and not getting any further since I removed most of the changes I made), now when I test the movie the mouse over does not seem to work correctly. It works fine, seemingly, for the first time I mouse over each button, but in order to have it work again I have to mouse over the button twice, and then it will pause randomly during a part of the clip and I have to move my mouse back over for the movie clip to continue.
I can't tell if this is because of the overlapping movie clips, or because my buttons are messed up, or if my actionscript is messed up, or if the timeline has to be longer, or what. Currently the timeline is 55 frames, the same as each movie clip.
I put a movieclip_instance.stop(); command in the first frame of the main timeline, is there a better way to do this? Should I put the stop command in the movie clip itself?
Here is a section of my AS in the main timeline, this is my first time programming ever, in any language, and trying to learn from the internet is more difficult than I thought it would be.
redmovie.stop();
red_btn.addEventListener(MouseEvent.ROLL_OVER, playRed);
function playRed(event:MouseEvent):void
{
redmovie.play();
}
ActionScript 3.0 :: Parentheses Turn Booleans Into Numbers For No Reason
Feb 26, 2010[Code]...
Results into: Implicit coercion of a value of type Boolean to an unrelated type Number. Why do parentheses turn into Booleans into Numbers? Can't I use bitwise operations?
ActionScript 3.0 :: Tween Animation Looping 4 - 5 Times Without Reason
Apr 1, 2011I have constructed this animation of a broken up image. If I just use the nested for loop in a new file, it will run normally but when i try to let it run after a TweenLite which has an onComplete function, the animation will be looped 4-5 times. [URL]
View 2 RepliesActionScript 3.0 :: Single Variable Flipping Between States Seemingly For No Reason?
Jan 27, 2011My movie is basically complete and consists of simple movie clips as buttons, these listen out for specific states and when these conditions are met a function is run which generally either plays a movie clip or runs a prevFrame loop.For some reason, although the mouse over and out conditions are working correctly the mouse down condition causes the variable to flip through 3 states which causes the panel im trying to show to basically run through 5 frames and then reverse for a single frame.I'm literally banging my head on my desk for a solution and my manager is starting to look at me a bit funny. Has anyone experienced anything like this before? Heres me code
Actionscript Code:
// import classes import flash.events.MouseEvent;// enable button mode for movie clipsmc_red.buttonMode = true;// Create variablesvar red_rewind:Boolean;var
[code]......
ActionScript 1/2 :: F8as2 - Headscratcher! += Incrementation Stops For No Apparent Reason?
Jul 8, 2009In trying to respond to a question I wrote a bit of code that just adds 0.01 to a number. It is displayed in a dynamic text field. If I start counting from 0 it only counts to 0.06. The counting stops but the onEnterFrame keeps running.
The Code:
var num:Number = 0;this.onEnterFrame = function() { num += .01; trace(num); num = Math.floor(num*100)/100; trace(" "+num);};
The Output:
0.01
0.01
0.02
0.02
[code].....
Why did the code stop incrementing after 0.07?
Java :: Indicate Failed Authentication Reason To Flex Client With JAAS?
Dec 29, 2009We're using :
JBoss 5
Flex SDK 3.5
BlazeDS 3, with integrated authentication (through JAAS and JBossSX)
Failed login are always indicated to the flex client by the same fault code : Client.Authentication
However, the underlying JAAS LoginModule throws a specific javax.security.auth.login.LoginException subclass.
How can we propagate the failed login reason to the flex client ?
Adobe :: Flash FLA File Size Becoming Huge For No Good Reason
Mar 31, 2012What is the reason for the enormass bloating of FLA file size, when many edits and saves are made to a FLA file, yet assets are not being added to the library? What is the best technique to keep FLA files smaller in size? (with the problem described below. I am not talking about published SWF files or asset management)Over many edits and many saves of my FLA files, they become 30 times the size on disk from where they start out. Example 750k can get as high as 34mb. In the past "save and compact" used to fill the role of reducing FLA file sizes but now that feature is gone.When I save as a CS4 file then back to CS5 the file becomes much smaller after it has become bloated, BUT I take a risk every time I do this that the file will become corrupted (I've had corruptions happen).I have read that files which were created in CS5 and are never in the format of CS4 don't have this problem, but I find that theory unlikely since I have tried to follow this rule to no success.
I have also read that every FLA file tracks its "history" of assets. So adding and removing assets to the library will sometimes cause bloating because old assets that are removed from the library remain in the FLA file. This seems bogus because there is no purpose to this, but could be an indication of a bug in Adobe Flash Professional CS5, and CS5.5.Personal details: the files I am editing contain personally created flash components, images, audio, many symbols (20+) but no embedded video.For me personally, this bloating is a problem because I'm dealing with hundreds of flash FLA files that should be about 1-4mb in size but are instead much larger. The overall effect is that I end up with gigabytes of files instead of hundreds of mbs.
ActionScript 2.0 :: Links Within Flash Movie Are Moving For No Reason On Hover?
Mar 4, 2011I have got a very obscure problem that I cannot for the life of me figure out. I have a flash movie which contains a number of pages which contain dynamic text fields containing HTML read from my database. This works absolutely fine, however for reasons that I cannot understand when you hover over some of my links they move to the right so they are inline with the edge of the first linked image at the bottom. The code is as follows:
PHP Code:
<p><a href="http://www.testlink.com">A LINK</a></p><p>Test text <a href="http://www.testlink.com">ANOTHER LINK</a>More text</p><p>
[code]....
Actionscript 3 :: Reason Flash Doesn't Respond On Local Zend Amf Services?
Dec 25, 2011I've (actually my classmate) got a problem with loading local ZEND_AMF services on Windows 7 (XAMPP). I can't find any answer on Google or on Stackoverflow. I found one similar topic without any answers: ActionScript 3 AMF Zend fails silentlyLet me describe the problem: I've developed the UI and dataloading for a Memory(matching) Game in FLASH CS5. The games uses data from an ZEND Framework website (you can add levels/cards/images there).[code]Everything works fine on my Macbook Pro (Using MAMP as local server), but a classmate (who's helping with it) of me that is using a Windows 7 laptop with XAMPP doesn't see anything. We're both using Flash CS5.5.For some reason his Flash isn't able to load local services. When he uses the same URL path like me Flash doesn't do anything in the responder. No Error function call and No Complete function call. We've been searching for the cause and tried several things.In a ZEND_AMF tutorial on the Internet we've found an online AMF Service and put that in the code. Of course we're using a nonexisting service function so the responser will call the Error function. And yes, this works. He runs the function returnError(). The cause of this problem is obvious: Flash on my classmates PC (using XAMPP) won't load local services. Allowing swf to correspond with non-local URLs (is an option where you have to add your swf to the Flash settings) => Has happened
View 1 RepliesActionscript 3 :: Global Var Of Type SimpleButton Changes To DisplayObject For Unknown Reason - Won't Letting To Access .upState.textColor
Jan 28, 2010This is a problem that's best explained in code. I don't see how active_button.upState, which I know is a TextField (see trace statements), mysteriously turns into a DisplayObject when I try to access the textColor property. I've included the error messages below for reference. Also, why is it that when I have an object that I know is a SimpleButton (again, see traces) I need to cast it to SimpleButton in order to store it in a var? That doesn't make any sense to me.
[Code]...