ActionScript 2.0 :: Array Re-initializing - Screen To Display Feedback Based On The Answer Of The Question
Jan 9, 2004
I have some code that initializes an array (arrQAnswer) that stores what button the user clicked on (0,1,2, or 3). That option it put into arrQAnswer, then compared against arrCorrectAnswer to see if the user got the question right. The problem is that for each time the user clicks on a button, they are taken to a new screen to display feedback based on the answer of the question. If the user gets the question wrong they are returned to the original screen and try again. This is where arrQAnswer is screwing up (or more likely, where I am screwing up). On the first question where the user chooses an answer, then returns to that screen, arrQAnswer re-intializes. Is there a way to stop this from happening? Note that it only happens on the first question, I think that is because the first question is on the same frame as the code (below):
I have some code running a media player and pulling multiple xml lists in depending on what button is pressed. What I would like to do is display button feedback state (to show what section is being played) based a click.I am thinking that I could create a conditional statement based on last button clicked but not 100%.
I have a few multiple choice questions using ActionScript 3.0 that are not displaying the answer feedback when tested as a movie or published to a swf. The way the question is set up is that a learner clicks a radio button and then clicks a Check Answer button. A red X or green checkmark appears next to the selected answer choice.Incorrect/Correct feedback should then appear below the Check Answer button.Currently the Incorrect/Correct answer feedback is not appearing in the output box when published.
stop(); var currBtn = ""; var currSelected:Number = 0;[code].......
I have 12 movieclip buttons which each contain a question. When you click on one, the answer appears. I need the answer to remain on the screen. On that same frame, there's a button for "more information".When that is selected, it goes to another frame within the mc, and more info appears. However, it is covered up by the other 11 buttons from the main screen
I'm going to be building a site for a photographer and would like to be able to do something like the thumbnail navigation in this example: [URL] I'm assuming it's adding the thumbnails to the Display Object via an array based on an external XML file, and displaying them once their corresponding full-size images are loaded ... Perhaps it's building the nav simply by looking to see how many photos there are in a folder on the server (i.e. no discreet XML added for each shot). Not sure if this idea is even possible -- would like to hear from any of you if in fact it is.
I am quite new to actionscripting and need to create a flash based quiz.The user will have to circle the correct answer in the quiz.I do know of drag and drop function but didn't know how to create circling function.
I have a quick question for you all. I'm trying to convert over some ActionScript code to C++ and am having a difficult time with this one line:
private var edges:Vector.<Array> What is this exactly? Is this essentially a multidimensional vector then? Or is this simply declaring the vector as a container? I understand from researching that vectors, like C++ vectors, have to be declared with a type. However, in C++ I can't just put down Array, I have to use another vector (probably) so it looks like:
I don't expect you guys to know the C++ equivalent because I'm primarily posting this with AS tags, but if you could confirm my understand of the AS half, that would be great. I did some googling but didn't find any cases where someone used Array as it's type.
AS3 Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds. Is there a way to temporarily suppress this on a specific block of code? I am creating a HUGE dynamic 3d array of objects, 1000x1000x1000 and need the build to actually finish the initializing.
my drag and drop target works...sort of. Here's the problem, when the target is dropped it should tell the user if it is correct. It does but you have ot keep drag and dropping all over the target to finally get the answer to display. I have checked the registation marks and stage alignment...nothing seems to work. it should be if you drop it over the hit (instance name) it should immediately display the answer of "correct" Here is the code for the drop target:
I am trying to get an answer from Input text Field and compare it to the correct answer.here is how my code look like:
//I have a confirm button here confirm_button.addEventListener(MouseEvent.CLICK, ConfirmFunction); //I have a correct answer as a String here var correctans:String = "July";
[code]....
This will check if correct answer contains words in the answer from input text field.But that will result on if I key in "July is great", it will still link to the correct answer frame instead of wrong answer frame.I want the answer to be exact same as the correct answer.
I have a grid with 12 movieclip buttons. When a button is pushed a answer is displayed and on the answer frame, there's a button "click for more information".
That button points to information in a frame within the mc button. However, when I test it all the buttons on the root timeline appear on top of this information, covering it up.
Also, when you move the mouse while in this "further info" area, it disappears
Is it possible to, if you have an array of class names like ActionScript Code: var city01names:Array = ["pic_01", "pic_02", "pic_03" ...] make a new array which would read these names, instantiate them, and push them into a new array containing the instances of all these pictures, which I could then use for a slideshow?
Just fired up Flash CS5 to a surprise. My screen-based SWF from years ago will no longer load. how does one achieve the equivelant of nested screens in CS5 now? I have outer chrome that's common to all screens and switch between nested screens to show different shared form screens that get populated with content from a database. Short of duplicating the shared content over and over, how do you get the layered effect I'm after? Does everyone simply jump around on the master timeline? Or does CSS play a role here?
how to reorder an array based on the information contained in another array. What my script is currently doing is detecting all the attached monitors I have and then ordering them based on their left bounds. However I then want to reorder the screens location in the array based on whether the user has selected that display or not. If the user has selected it, by clicking a button, the button movie clip will be on frame two, if they haven't been chosen it will be on frame one. So what I am doing is then creating two separate arrays, chosen screens and not chosen screens, and then combining them into one.
Code: if(displayButton.currentFrame==displayButton.totalFrames) { //sort the chosen ones into an array
[Code]....
My problem now is being able to reorder a separate array which contains all the screens, called screenArray, based off of that. screenArray currently returns [Object Screen], [Object Screen], [Object Screen], etc... and is in the order of 1,2,3,4,5,6. How do I take then and get it to be equal to the order of my displayButtonsChosen Array of 1,3,5,2,4,6?
I'm trying to figure out if it's possible to display a specific image based on the current date? for example, say I have something for sale 7 seven days, and I want to create an animation of images with numbers, countdown from 7 to 1, and have it stop on the number of days left.
The only place i've seen something like this is here
on the right side, just above the dark grey bar, a little calendar flash loads in and animates.
I'm currently trying to get an AS3 based flash file to run full screen in a windows projector, but no matter what I try codewise I cannot get the function correctly working,I've tried
fscommand("fullscreen","true");
which works, but I'm also told to avoid it, as it's buggy : - I also tried
I am developing a flash based website using mxml. My monitor's resolution is 1280x768 and is widescreen. The problem is while it appears properly in my screen it doesn't appear properly in others.
-Let scrollbars take care of it : If the screen is 14 inch screen with 800x600 resolution it appears zoomed in. So that's a problem -Get screen resolution and resize using scaleX and scaleY : The graphic components will get resized but fonts give problem.
Im trying to show a flash animation in my QT application, I'm doing it by a QWebView. This is my code:
webpage = new QWebPage(this->window); webpage->settings()->setAttribute(QWebSettings::PluginsEnabled, true); webpage->settings()->setAttribute(QWebSettings::JavascriptEnabled, true);
[Code].....
So, Im able to show regular pages, but the pages that got a Flash animation doesnt appears. I receive a blank page and a symbol from adobe, like "Get flashplayer". I already have it, those pages load ok in Firefox and Chrome. I have put the NPSWF32.dll e my project folder and in others standar paths, but it Didnt work. So I do not really know what to do now. Hope you guys can helpme, I couldnt find the plugin file in Firefox or Chrome folders, so I downloaded another NPSWF32 to put in the project folder, maybe is that?
how to get some text to change based on the date of the users pc.What I am trying to do is when the swf file is opened a header section displays a different quote for each day of the year.The list of quotes will be stored in the AS3 and not pulled from an external file.I have worked how to dtermine the current date. The bit I can't seem to get my head around is if I give each quote a variable reference how do get quote 54 to be displayed on the 54th day of the year?
How to create some action script that will display either an image or a SWF based on the time of day ie. Day and Night and the seasons ie. Winter, Summer, Spring, Fall.
I know it has something to do with creating a file that is .as and making sure you have the correct class Id. Looked at a few tutorials on creating calenders and image galleries but can not figure out how to combine the two to just show the image or SWF.
I have a movie clip and i would like to display its duration in minutes and seconds.urrently I am displaying the frames so it shows "frame 320 of 500" etc.I would like to figure out how many frames in the movie clip and convert it to time so in the end it will display: 1:23 / 3:00
I need to develop a browser based application that record the user screen, much preferably on flv. Also doing that with java would be perfect.That's exactly what they accomplished at [url].... , with just a javaWS app.
I have an image on my frame. (a circle). I need this circle to blink on the screen based on user's input. The circle display time and the hide time should be input in a input text box in the beginning. Also this has to blink for "x" number of user defined cycles. I know how to control the delay between blinks but I cannot control the amount of time the circle stays on screen.
Is it possible for recent versions of flash to directly (or thru Php) access (& update) data from a mysql database and display results based on the data?
So if my database were like this (math scores):User 13Jerry | 20Kane | 7 the flash output would be a bar graph like this (those hyphens would be bars in flash)
Is this possible these days? Google analytics does something like similar to this.
I last used flash somewhere in 2003/4. Never after that :-) I've completely lost touch.
