ActionScript 2.0 :: Automatic Filter Animation Using Tween Class?
Jul 25, 2006
I've been following the "Using the Tween Class Part II". I even looked at the "Applying and Animating Filter Effects". Both of them don't offer much insights to animating a filter effect without the use of rollovers.What I'm hoping to achieve is that the glow filter animates after the object it's attached to finishes its animation.So far, I've got the glow effect to show up. However, I can't get it to animate after the object's motion has finished. The following is how I have the codes set up:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code].....
View 3 Replies
Similar Posts:
Jun 9, 2011
Is there a way (using the AS 3 Tween Class, NOT TweenMax) to speed up a timeline animation?
View 2 Replies
Oct 27, 2009
I'm doing my company website. When a mouse event sends you to my services page I have 4 seperate blocks of text that fade in. So far I have the first 2 texts blocks fading in at the same time. I want to stagger the timing so the second block of text starts its fade in a fraction of a second later, and so on with the remaining text blocks. Below is the code I've used to fade them in at the same time. Is there an easy way to adjust this code to achieve the desired effect.[code]....
View 0 Replies
Dec 18, 2010
I have created a simple tween letter animation in AS2. There are two letters (a and b) on the stage that I have to animate and display one by one. Now both are displayed at a time. x and y position of each letter also has been set. Can I set time delay between first and second letter? I have attached my fla. file.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
a_mc._x = 137;
a_mc._y = 215;
[Code] .....
View 1 Replies
Jan 6, 2006
if you'll look at [URL] let it load and then click on FASHION. All goes well. Then click on HOME. All goes well. Now click on FASHION again. after you've done each card once duplicate movie clips start popping up, but I've not called any such function. Here's my code.
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
if (_root.nextCard == "Home") {
[Code]....
View 2 Replies
Aug 13, 2007
I have applied a blur to the begining of a MC, and I would like to fade the blur out once the animation is complete.
While I'm able to remove the initial blur, it is not a gradual, smooth transition. It merely "snaps" back with no blur applied.
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
import flash.filters.*;
[Code].....
View 1 Replies
Oct 13, 2007
I have this code controlling my movie clip: "logo" It rotates the bevel clockwise one round.
Code:
import flash.filters.BevelFilter;
import mx.transitions.Tween;
bf = new BevelFilter(3, 1, 0xFFFFFF, 1, 0x000000, 1, 3, 3, 0.1, 3, "inner", true);
bfRotate = new Tween(bf, "angle", None, 1, 360, 6, true);
bfRotate.onMotionChanged = function() {
[Code]...
How do I loop the animation, so the bevel effect will rotate forever?
View 1 Replies
Mar 4, 2011
i'm receiving a very noticeable performance hit when using TweenLite to tween a filter while dragging.
private function mouseMoveEventHandler(evt:MouseEvent):void
{
evt.stopImmediatePropagation();[code]....
i understand there is a Drop Shadow Plusing with TweenLite, but that only has the ability to tween the filter on and off, rather than change the distance or blur amount of an always visible drop shadow.also, i'm not testing this on a mobile phone, i'm testing on my fast desktop in both Flash CS5 and the external debugger - both are lagging the display object, which is just a simple square shape, even after the zoomTween has completed.
View 1 Replies
Sep 26, 2008
I have not seen an answer for this sideeffect. I have a sprite (aka MovieClip sorta)n my stage. I am using a motion tween on the timline(keyframes, etc) that moves my sprite object from left to right. Iwould like to apply a glow filter to the object on the stage. I amusing GreenSock, TweenLiteFilter, although the same thing happensif I use the standard Flash glowfilter. If I apply the filter inactionscript, the tween ceases to play. If I apply thefilter usingthe timeline, and clicking on my sprite on the stage, the motiontween plays.Can I not mix and match effects in ActionScript and thetimeline? Does this mean if I want a filter and a motion tween atthe same time it has to be done via keyframes on the timeline OR in
View 3 Replies
Jan 6, 2006
How can i add the blur filter to this animation, acording to the speed of it?
View 1 Replies
Oct 3, 2011
I was given the following code to establish a motion tween for five different movie clips. The code also ensures that a glow filter is applied at 5-second intervals. My user has now requested that the code be changed to ensure the following occurs:
Once glow filter has been applied to the darkBlue_mc and when the glow filter is beginning to be applied to the red_mc, then the glow needs to disappear from the darkBlue_mc, and so on through all five movie clips, so only the current movie clip should have the glow filter shown. When the glow filter is applied to the last movie clip, which is lightBlue_mc, then he wants all movie clips to have the glow filter applied after a five second delay.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
import flash.filters.GlowFilter;
var textCount:int = 0;
[Code] .....
View 2 Replies
Nov 4, 2010
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 Replies
May 11, 2009
I have been trying to create an automatic slideshow at a click of a button. I have tried a few ways using timer class to show images(stored in an array) for a few seconds but i can't seem to get it working. Below is the code that i am trying to get it working..if there is any kind soul out there,
[code]...
View 4 Replies
Jun 21, 2006
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 Replies
Mar 4, 2010
If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
View 1 Replies
Oct 2, 2010
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
View 1 Replies
Oct 27, 2009
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
View 2 Replies
Oct 25, 2010
Is there any way to make a movie clip start at a given x and y point, and ends at another x and y point, in 90 seconds?m not getting a good result.The main problem is, I want the movie clip to travel along a straight line. And by this code below the "b" movie clips makes some curves.Heres what Ive done.
"p" is point movie clip
"b" is ball movie clip
fullTime = 90000;_currentTime = fullTime;oldTime = undefined;onEnterFrame = function () {if
[code]........
View 16 Replies
Oct 26, 2010
If you try to make a movie clip travel along a rectangle diagonal within 90 seconds, the movie clip makes some curves.
View 5 Replies
May 13, 2006
What I want to do is tween a number from lets say 0 to 50 using the Tween class. The below is an example of my tween but it wasn't working (*NOTE* i'm using TweenExtended but if you change the tween to Tween only it will be the same thing, i just have a habit of using the TweenExtended class):
[Code]...
View 3 Replies
Oct 11, 2011
Any good 'real world' examples of when and why you might use the map and filter methods of the new Vector class in Actionscript?
View 1 Replies
Mar 7, 2007
[code]It works when the code is placed right on the timeline of the MC in question.However when i use the exact same code in an external "effects" class file, it does not work.
View 5 Replies
Mar 2, 2009
Can this operator be implemented by custom class? Filter operator - xmlList.(true), the expression inside parens is filter
View 2 Replies
Sep 21, 2005
I'm trying to create some script that will connect to my PHP script, which has searched the database for whatever I told it to....and it will right the results to XML that I send to Flash. What I've been up all night doing is trying to make some kind of class that will allow me to filter those results avtively?
If you're running Firefox:
Go to the address bar and type about:config
When you get there you can filter them by typing any letter
It will return all the results that have that/those letters in them
Notice how it does it for every letter
Actually you can see you preview of it by using the iTunes search feature
I've had enough of these undefined messages in my test output..the same XMLNode object whatever selections worked without the class and now where I could find such a Class or perhaps know better search keywords than iTunes search filter Actionscript Flash Class.
View 5 Replies
Mar 10, 2011
I looked at the following example in the AS3 Reference: [URL] It is unclear to me looking at the package example how to apply this in standard ActionScript 3 without packages to a Movie Clip resident in my Library that gets called at RunTime. how I would push the DropShadow filter onto my Movie Clip at RunTime?
View 6 Replies
Jul 15, 2009
To achieve a zoom effect in our 2D flash game, we make the background of the game much bigger than the visible stage. This becomes a problem when the background is complex or when we apply a grayscale filter to the background. Is there a better way to do zoom? Or, is there a way to apply the filter to only a specific area of a movieclip?
View 2 Replies
Oct 14, 2009
getting the current x position value of the tween object during the animation using Tweener.I want to move a movieclip across the stage, and at a certain x position, i.e. x=600, a new movieclip is added to the stage and chases behind the first one.
My current code looks like this:
Code:
import caurina.transitions.*;
import caurina.transitions.properties.CurveModifiers;
[code]...
View 0 Replies
Mar 19, 2010
I am using some tutorial from lynda for making tween animation for my inspiration on making web site in CS4 but in my 2-3 project I have same problem. Sometimes my tween crash in middle of animation? Is this beacouse I have to much code in timeline?
View 8 Replies
Jul 30, 2010
Trying to start an animation after a tween is done. Animation starts but way later, like 5 seconds after tween is finished.
Code:
var easeInPic:Tween = new Tween(bg, "alpha", Regular.easeIn, 0, 100, 1000, false );
easeInPic.stop();
function showPic(e:Event):void{
tweenPicEI();
}function tweenPicEI ():void{
easeInPic.addEventListener(TweenEvent.MOTION_FINISH, showMenuBar);
easeInPic.start();
}function showMenuBar(e:TweenEvent):void{
menuBar.gotoAndPlay(1);
}
View 4 Replies
Jan 31, 2011
I'm trying to make an animation and it seems like an impossible task. I'm not a beginner, and this is harder than it first seems to be.So this is what I need: to make a tween between a partial small circle to a big circle. What I mean is I want to use the Oval Primitive tool and on frame 1 I'll have a circle (radius 100px) with Start Angle: 0 and End Angle: 230 and on frame 50 I'll need the same 100px circle with Start Angle: 0 and End Angle: 300.
View 1 Replies
