if you'll look at [URL] let it load and then click on FASHION. All goes well. Then click on HOME. All goes well. Now click on FASHION again. after you've done each card once duplicate movie clips start popping up, but I've not called any such function. Here's my code.
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
if (_root.nextCard == "Home") {
[Code]....
I've just started on my first AS3 project and have already run into a problem. Can someone please tell me why the following code is not working correctly. What's NOT happening is that the mc that is passed to the scalethis function is NOT alpha'ing to 0 and I can't for the life of me understand why.
PHP Code:
package
{
[code]....
Is there a way (using the AS 3 Tween Class, NOT TweenMax) to speed up a timeline animation?
View 2 RepliesI'm doing my company website. When a mouse event sends you to my services page I have 4 seperate blocks of text that fade in. So far I have the first 2 texts blocks fading in at the same time. I want to stagger the timing so the second block of text starts its fade in a fraction of a second later, and so on with the remaining text blocks. Below is the code I've used to fade them in at the same time. Is there an easy way to adjust this code to achieve the desired effect.[code]....
View 0 RepliesI have created a simple tween letter animation in AS2. There are two letters (a and b) on the stage that I have to animate and display one by one. Now both are displayed at a time. x and y position of each letter also has been set. Can I set time delay between first and second letter? I have attached my fla. file.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
a_mc._x = 137;
a_mc._y = 215;
[Code] .....
I've been following the "Using the Tween Class Part II". I even looked at the "Applying and Animating Filter Effects". Both of them don't offer much insights to animating a filter effect without the use of rollovers.What I'm hoping to achieve is that the glow filter animates after the object it's attached to finishes its animation.So far, I've got the glow effect to show up. However, I can't get it to animate after the object's motion has finished. The following is how I have the codes set up:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code].....
How can I use the Tween class to apply filters to movieClips?
i want to apply a DropShadow through a tween so that it applys smoothly. Actually i want it to apply on rollover and remove itself on rollout.
The first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part.The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out...!So i think its time for some code now...:
Code: Select allimport mx.transitions.*;
import mx.transitions.easing.Strong;
var FADEINSTART:Number = 2;
var FADEINSTOP:Number = 7;
[code]....
Ive managed to make the previous mc to fade out but cant really make everything work properly...!
I am a newbie in flash Action script2can anyone please tell me that how can i duplicate a movieclip to as much numbers i want through out the stage using actionscript2. i have searched lots of posts in sites but i can't get it
View 1 Repliesi made this code that duplicates a movie clip randomly in the stage but i want it to be duplicated out of the stage.
View 1 RepliesI have 26 letters(english alphabet) into a linkage movieclip(var let:Letter = new Letter() ) and I put a drag and drop function into the mc. My goal is to drag the movieclip leaving the original on its position. The reason why I want to duplicate is that when I spell a word with single vowels on it ex. "word" with single "o" that would have no problem. But when I spell a word ex. "banana" with 3 "a"`s there is where my problem is.
View 1 RepliesI'm in a bit of a pickle and was wondering if anyone out there .
function RotateDisplayOrDrag(whichPiece) {
if (Key.isDown(18)) {
_root[whichPiece]._rotation += 22.5;
[code]....
i am trying to populate an MC/text field via XML and the duplicate this underneath itself (in a loop) for how ever many lines of the xml there are.. Ive got quite far *in my humble opnion* but seem to have come unstuck on the looping and duplicating...
My code only duplicates the movieclip once - and the second movieclip is not populated (ie pulling data from the xml) only the first one is!..
Code:
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
[code]....
Currently I have a function that makes a movieclip copied from one specified in the GUI,moves it to a certain point on the stage, then ends. This is called several times to create various patterns etc on the stage.
Code shown below:Code:
function draw_block( iX, iY , sBlockName )
{
[code]....
I want to create a dynamic thumb scroller. I want to call a function in the thumb . How can it possible?
ActionScript Code:
var btn:CustomButton;
for (var i:Number = 0; i<totalNum; i++) {[code]...
I want to call a function named SetRotate() in CustomButton Class
I am basically trying to duplicate a movieclip by using a button.. (no probs there).however, i want to drag each movie clip individually.. ( my brain froze)here is my butchered code..// graphic is the mc i wanna drag, n is the textfield that i want to count up.
on (press) {
addmore = "graphic" add n;
duplicateMovieClip("graphic", addmore, n);
[code]......
I'm working with a script that loads from an XML some jpgs, these ones once loaded move to their positions.
[Code]....
the problem is that i would like put all these movies well aligned in rows and columns, i've seen it's possible to do this with a nested for.. loop, something like this
[Code]....
how to duplicate a MovieClip 10 times using 'duplicateMovieClip'& place each instance of the new clip with equal spacing when the frame starts.. instance name of my MC on stage i.e. to b duplicated is bt_mc & it is the y position i.e is to b changed.
View 12 RepliesThis is to be exported into a movie, so not an Actionscript question. I'm making a parody of a fighter-game scenario. One character looks like Subzero and the other like Scorpion. They're the same models but one should be colored differently. They're comprised of symbols such as arms and legs to make a larger overall character animation. There are several animations of them, for kicks, punches, bobbing, etc. Now, I know that if I went in and edited the colors, that all instances would change accordingly. Duplicating the symbol doesn't work because they share the same inner symbols. Is there a method for "deep" duplication? A tint doesn't work because essentially I only want to change the color of some of the components.
View 7 RepliesI have a movieClip(contentMC) that contains numerous movieClips for my site. I have set the color matrix of contentMC to be black & white. This works fine by itself but once I start duplicating and populating movieClips inside 'contentMC' the color matrix settings are lost.
[Code]...
I've even tried to populate the content and THEN turn it B/W thinking that it would be better to convert the contentMC to BW after it was done building itself. This didn't work either. So I started to comment out code until the color matrix settings would stick and this line of code is the killer but unfortunately is essential to rendering the site. contentSC.samplesMC.sample._y = contentSC.samplesMC.sample._y+621; (this line offsets a duplicated movieClip)
I have a question about movie clips. I have about 20 MC-s in my flash. Is it possible for me to duplicate one of them multiple times in specific location? I mean if I have button that says "DOG" and I press it, then new dog appears on screen. And I need to do it for like ten times or so
View 8 RepliesOn a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesI need to duplicate a FileReference ( need to upload it to two seperate servers ), is there any way to actually duplicate it and not just have it reference to the other one?
View 1 RepliesNow I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 RepliesIf i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
Is there any way to make a movie clip start at a given x and y point, and ends at another x and y point, in 90 seconds?m not getting a good result.The main problem is, I want the movie clip to travel along a straight line. And by this code below the "b" movie clips makes some curves.Heres what Ive done.
"p" is point movie clip
"b" is ball movie clip
fullTime = 90000;_currentTime = fullTime;oldTime = undefined;onEnterFrame = function () {if
[code]........
If you try to make a movie clip travel along a rectangle diagonal within 90 seconds, the movie clip makes some curves.
View 5 RepliesWhat I want to do is tween a number from lets say 0 to 50 using the Tween class. The below is an example of my tween but it wasn't working (*NOTE* i'm using TweenExtended but if you change the tween to Tween only it will be the same thing, i just have a habit of using the TweenExtended class):
[Code]...