I tried the following code and it works great.
on (release) {
loadMovieNum("main.swf", 1);
main.enabled = false;
}
How would I go about resetting the the button's status after another movie is loaded? Do I have to manually code for each movie loaded or is there an easier way using loops perhaps?
Got a button (imported png defined as a button in the library).The button is dragged onto the stage, given an instance name "btn".Clicking the button fires an eventListener which is doing all the right things, except...
btn.enabled = false;
...only changes the cursor from a pointing finger to an arrow. What?! It is still clickable.My intention is to disable the button so it cannot be clicked. But it can still be clicked. Not good.How do I disable a button and prevent it from being clicked?
I have a Spark Component (a Group) which doesn't behave as wanted.The tooltip is only shown when the component is enabled=true which the following example shows:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"[code]/....
In the Halo component the toolTip is shown. And this is, what I want to achieve.In my case I want to try something like this:
<s:Group toolTip="{cartEntries > 0 ? 'great!' : 'go and buy!'}"></s:Group>
I am wondering how can one stop the user from clicking on a button (MC) without using btn.enabled = false.example: i have a menu that has buttons which have tweens on rollover and onRelease events. I want to be able to click on home for e.g. disabling all other buttons to avoid user clicking but still keep the rollover. I have tried btn.enabled = false and of course i dont want to disable the entire btn and instead i want to disable just the onRelease event or even avoid the mouse from clicking until the animation finish. Only Then, user can click on another menu button.
View 3 RepliesIn datagrid i shows number of checkbox for example 20 checkboz ,in 20 checkbox if i select any 15 checkboxs then remining checkboxs will be disable (enabled="false" But 15 selected checkbox accessable ?
How can i do that . i tried
<mx:DataGrid id="dg" width="100%" height="100%" rowCount="5"
dataProvider="{dp}">
<mx:columns>[code]...
How could I tell a flv movie to start through a button when its set to autoplay=false?
View 2 RepliesThis is something that is probably really basic but for the love of gawd I can't remember how to do it.
Example: 3 menu buttons, you press the first button and it executes a function and disables itself leaving the second and third button enabled. You then press the third button and the first button gets enabled while the third button is disabled. Same thing goes for the second button.
I just wanted to know if anyone knows how i can determine when an externally loaded SWF has finished Playing.... The swf i am loading cannot be edited so i cannot add any flags etc into it.... i load the swf into a new movie my_MC.loadMovie("OENAV3.swf"); and then i want to be able to see when that swf has finished
playing....ie) all the way to the end of the swf....not just finished loading....
url...Where does the 'loaded' variable get set to False?I could only find it being set to True on the enterFrame function.Also, is there a more updated way to do what this tutorial is showing?
View 4 RepliesI have a question about this Kirupa Tutorial: [URL] Where does the 'loaded' variable get set to False? I could only find it being set to True on the enterFrame function. Also, is there a more updated way to do what this tutorial is showing?
View 4 RepliesI have the following situation
MainMove.swf is doing a loadmovie of SecondMovie.swf
The Button that loads SecondMovie.swf also disables other buttons in MainMovie.swf
on (release) [code].........
How do I Re enabled the Buttons in MainMovie.swf from a Button within SecondMovie.swf?
i have a 3 buttons in library i need: if i click to 1button i see 1mc but can not click to 2button and 3button, just after i close 1mc i can click to 2button and 3button, and sure for 1button again why its not working in my example?
[Code]...
I want to make a button disabled if a datagrid is empty and it should be enabled when there is atleast 1 entry. The entries in the grid are made at runtime. I tried this this is the button:
<mx:Button id="update" label="Update Contact" enabled="{isButtonEnabled()}"/>
And the function is defined as where dg_contact is the datagrid:
public function isButtonEnabled():Boolean {
if(dg_contact.selectedIndex==-1) {
return false;
} else {
return true;
}}
I'm trying to set the rtBtn to 100% alpha after the tableButton has been pressed by the user. Currently rtBtn is living on the stage and set to 25% alpha. I've gotten all the other parts of this code to work, except the color transform. I imagine I'm declaring it improperly.... any suggestions? Originally I was trying to apply a tint, but that seemed to be only AS 3.0?..[code]
View 2 RepliesI'm loading data using multiple LoadVars. How do I evoke a mc to be visible=false; after all data are loaded?
View 4 RepliesWhat will my movie clips not disable here. They are still clickable? I get my trace 24 times. what am i doing wrong. I have 24 cards all named card0_mc - card23_mc
code:
function disableCards() {
for (i=0; i<24; i++) {
trace("in here");
this["card"+i+"_mc"].enabled=false;
}
}
MainMove.swf is doing a loadmovie of SecondMovie.swfThe Button that loads SecondMovie.swf also disables other buttons in MainMovie.swfon (release) { _root.intro_btn.enabled = flase; loadMovieNum("SecondMovie.swf", 2);How do I Re enabled the Buttons in MainMovie.swf from a Button within SecondMovie.swf???
View 4 RepliesI have a movie clip (a) with a button that will load movie clip (b) when clicked. It loads (b) on top of (a) which is exactly what i want.
Now the problem. I have a button in (b) that I want to use to close (or unload) (b).
This is the code in (a) that loads (b):
Code:
spinner_mc.production.addEventListener(MouseEvent.DOUBLE_CLICK, doubleClickHandler2);
function doubleClickHandler2(event:MouseEvent):void {
[Code]....
I can create buttons using flash. and i have change buttons colors when the mouse over status of the button. but the problem is i cant set the status of the button.as a example in above site if the user click the FAN Club button button will change in to a different color ( ash rectangle).
View 5 RepliesI Have rollover buttons in Flash cs3 using actionscript 2 and i need to have a "visited" status.Every visited button would stay on the rollover image and indicate to the viewer that he's been there.
View 3 Replieswell i had a tree menu which contain about 15 and under each of it about 3 or four sub the problem is when i press one of the sub it should gives specific status and when i press anther button from anywhere ,the 1st button should B initialized as it was i made to var to dedicate which i 've jst pressed.[code]
View 3 Replieshow to use attachMovie to load a movieclip in to my main stage, drag it around and include a close button. I then added a variable (x) that would control which clip would on top depending on which was clicked last.
The question bit... I've managed to do this (...sort of), but was wondering if anyone could hint me with the code to disable the button if the clip is loaded, and enable it as soon as the clip has been closed so that it may be opened once again?
I'm using this to load the clip where x is the variable;
Code:
on (release) {
attachMovie("new", "newname1", x);
newname1._x=200;
[Code]....
I've an empty movie clip on the stage and an external swf is loaded to that movieclip. How can I check the external movie's frames are completely loaded or not from the base movie. Is it possible by targetting the empty movieclip?
View 1 RepliesBasically what i have is three buttons which can be pressed in a maximum of 7 different combinations. Each of these buttons has a movieclip underneath that advances to the next frame when the button is pressed. Each clip has two frames with actions, frame 1 has:
stop();
var option1:Boolean = false;
and then frame 2 has:
stop();
var option1:Boolean = true;
So when you press a button you have true, and false when the button is pushed again.
i already have a constant loop between frames 2 and 4. At frame 4 i think i need to have some code that detects which state the 3 boolean statements are in and then load a movie depending on which statements are true and which are false.
How do i enable the button false after click? this sample doesnt seem to work[code]...
View 3 RepliesI am unable to get useHandCursor = false; to work on a button script. I need to have it on the button script, not in a timeline function (as the swf I am working on has many buttons and none have names on their instance, nor on the movies containing them). Is it possible to do this? I have also tried, this.useHandCursor = false; but also not working. By the way, this page isn't working in IE7. It is showing blank under the "Post New Thread" bar.
View 10 RepliesI am loading an external Movie via FLVPlayback, after the movie has played - the REPLAY button shows up. Everything works except the REPLAY button shows up for a couple of seconds before the movie starts playing. I'm thinking that it's because of my 'If' statement, which checks if the movie is PLAYING to show(or hide) the replay button.. I'm super new to AS.[code]...
View 1 RepliesI have a bit of a problem.. I am loading an external Movie via FLVPlayback, after the movie has played - the REPLAY button shows up. Everything works except the REPLAY button shows up for a couple of seconds before the movie starts playing. I'm thinking that it's because of my 'If' statement, which checks if the movie is PLAYING to show(or hide) the replay button.I'm super new to AS..how I can change the 'if' statement to look weather the movie is loading or playing.! Here's the code:
import fl.video.*;
replay_btn.visible = false;
var myVideo:FLVPlayback = new FLVPlayback();
[code].......
how i can i false a cursor while rollover a movie clip (not button, not handcursor).
Edit:
Mouse.hide();
hide cursor but i want to set a hide area with a movie clip. How can i do this ?
I'm trying to make a flash animation but I'm getting these two errors: 1119: Access of possibly undefined property enabled through a reference with static type Class. (line 4) 1061: Call to a possibly undefined method addEventListener through a reference with static type Class. (line 5) This is the code I'm using:
Code: Select allimport flash.display.*;
import flash.events.*;
stop();
buti.enabled;
buti.addEventListener(MouseEvent.CLICK,pla);
function pla(e:MouseEvent):void {
gotoAndPlay(2);
}
My animation is a initial photo that turns around and becomes a black backgroud (were I'll add some text), now what I want is that the photo won't animate until I do a click in it. I used a Layer with a transparent image and converted it to a button and the export name is buti. The other to layers were converted to movie clips named preto and foto.