ActionScript 2.0 :: Button Do Multiple Actions?
Dec 3, 2009
I have a symbol that is movieclip (symbol name switch) which has got a switch on/off image inside it, if u click it, the 'switch on' image comes (frame 5) and when u click again the 'switch off' image comes (frame 1) Nw i want the symbol such that when i press it not only does the 'switch on' image come, but also change the image of another movieclip (symbol name 0bit) which is in the root timeline and not inside "switch" symbol
PS: Am using Flash CS4
View 7 Replies
Similar Posts:
Oct 30, 2011
is it possible to add multiple actions to the same button.e.g.on stage theres only one button, on first click it should make mc1 visible , on second click it should make mc2 visible and so on.
View 3 Replies
Jul 23, 2011
So I have the following Actions for my button:b1.buttonMode = true;b1.addEventListener(MouseEvent.ROLL_OVER,onButtonOver);b1.addEventListener(MouseEvent.ROLL_OUT,onButtonOut);
b1 is my MC button Instance name. I want to add several other MC button names to this ActionScript (b2, b3, etc). How can I add the other MC button names without just copying and pasting the whole code with new instances?
View 10 Replies
Apr 18, 2011
I have a project where I need my button to have more than one function.the link to my flash file is:(tried to upload but it keeps saying invalid file)I have a countdown within frames 1-90. I didn't convert it to a movie clip because I have a flash movie that needs to run after it, which I put in frame 90.The way it runs right now with my rollover/out actions is perfect, BUT IT'S REVERSED from what I need. so close! grrr!
I need the countdown to stop if you move the mouse away.Then when the video starts (after the countdown), I need the rollout action to disable. If I can get this to work, I will be putting an exit out button on the flv movie so the user may exit out, using the button instead of the rollout action of the mouse.
Brief summary:
countdown frames - rollover/rollout
flv movie - no mouse actions
View 9 Replies
Oct 10, 2009
In the first frame of an fla I have the code below, only the functions in red works. When rolling over the second only the first function in blue works but the mouse freezes when attempting to rollout (green). But if I remove the code from the first frame and code each seperate button the functions work.
Any reason for this
stop();
btn_shopping.onRollOver = function () {
gotoAndStop(2)_root.main_mc.gotoAndStop(1065);
} btn_shopping.onRollOut = function () {
gotoAndStop(1)_root.main_mc.gotoAndPlay(162);
} btn_pen.onRollOver = function () {
gotoAndStop(3)_root.main_mc.gotoAndStop(1066);
} btn_pen.onRollOut = function (){
gotoAndStop(1)_root.main_mc.gotoAndPlay(283);}
View 2 Replies
Jan 22, 2010
I am creating a "Kiosk" to be used in flash using ActionScript 2.0 with individual scenes. At the end of each scene is an outro and the beginning of each is an intro to give the impression of them all appearing seamless.So on each button I have added the following [code]Frame 180 is where the outro plays to enter the selected scene of that button. I would then like add to this piece of script that I want that button to go to that scene after the outro is played. So it would have something like gotoAndPlay(scene xx);The only other solution I have at the moment would be to make an outro of each scene for each button to jump to but this having 8 scenes it would end up adding up to 64 outros in total.So would there be a solution to simply have each button jump to the one outro then jump to its own scene?
View 3 Replies
Dec 12, 2006
I have 4 size buttons like so:
S | M | L | XL
Now when a user rolls their mouse over each hit target(size) I have some frame animations that make a box come over and an opposite animation for when they roll out...but now when the user clicks a button I am having problems. I would love to have it so when the user clicks a button the box stays around the button and then if the user were to click a different button it would play the out animation of what was selected before and then the begining animation for the button hit now.So if I clicked the button "S" and then decided to click the button "L" it would play the out for "S" and then play the in animation for "L"
View 4 Replies
Sep 22, 2009
I am fairly new to Flash and I am wanting to create a virtual tour through a house. I DON'T want the panoramic views; I want to be able to have the buttons walk the user forward through the house and look side to side. I have successfully made the left, right, and forward buttons look side to side and move forward for one sequence, but once I add multiple "If" scripts for the forward button it messes everything up. Furthermore, when I want the forward button to go back to its screen when on the left screen it doesn't want to seem to work.
All this is to say how do I get a button to do different "if" functions from frame to frame.
The code I currently have looks like this:
stop();
up_btn.onRelease = function() {
if (_root._currentframe == 4) {
[code]....
it seems to mess up the entire button. It will only do the first command in the structure. All of it has been VERY frustrating and I don't know how to structure it so that it will go to the desired frame but also go back to the frame I want when looking left or right.
View 1 Replies
Oct 5, 2006
how to group objects together so that you can change their parimeters all at once. Like if I have a 7 boxes on screen with the instance name box1, box2, ect..... and i wanted to do change them via action script, like make them all partailly invisible when an event happens. How would I do that. I've tried stuff like
box = ["_root.red", "_root.blue"];
box._rotation = 40;
and
box = [_root.red, _root.blue];
[Code]....
View 2 Replies
Feb 3, 2010
want to simplify coding and wondered if there was a way to write a script that could be used on multiple objects without having to write it to address each object individually. I am building a simple menu where I want the menu link to rise and scale up when the button for it is rolled over and then return to its original position when the mouse rolls off. I know I can write this per button and per item, but wanted to see if there was a way to write it once and then apply the action to everything. EX. My menu consists of 5 items (and respective buttons) home_mc (home_btn), menu_mc, dining_mc, contact_mc, specials_mc.If I write the code
home_btn.addEventListener(MouseEvent.MOUSE_OVER, homeOver);
home_btn.addEventListener(MouseEvent.MOUSE_OUT, homeOff);
function homeOver(MouseEvent) {
[code].....
View 5 Replies
Oct 2, 2007
What i want to do is assign actions to each individual movieclip using a for loop.. let me explain Say i have 5 MovieClips on the stage... With instance names clip1, clip2, clip3.... Now what i want to do is assign a OnRollOver and OnRelease to each 1 So individual code for each would be something like this.
[Code].....
View 1 Replies
Apr 3, 2004
is there someone who know's how to give the actions to a button on top of another button. If I try to do this, the button on top doesn't reacts.
View 10 Replies
Aug 17, 2010
I got this early version of a sliding menu. See file "scrolling.fla". Its got four images that slides into place when you click on the small colored buttons. The thing is I want the movie to quit/shut down when I press the red button, AFTER the red image has moved back in place.The code for the red button is:
on (press) {
_root.xnew = _root.mask2._x+(-2-1)*458.5/2;
}
I added the following:
on (rollOut) {
_root.unloadMovie();
}
It works in a sense but I dont want to use "on (rollOut)", because you might shut down the slideshow involuntary moving the cursor on your way to the other buttons. So the question is, yet again, how to quit the movie after the red image is back in place?
View 6 Replies
Sep 10, 2008
I`ve made a movie that has one button , now when I click on button this code will execute exactly :
Code:
b1.onPress = function() {
loadMovie("textarea-load.swf",555);
};
I need add another code to hide textarea-load.swf from my movie and this action should occur when I press same button once again . Note : I don`t have any movie with "555" instance name but it helps me to run my movie
View 7 Replies
Aug 24, 2010
I got four buttons that pull up images in a slide show. I want the fourth button to first pull the image in place and THEN shut down the movie clip. I thought this would be easy, but no. Unfortunately I canīt attach the fla-file on this forum. You could take a look at this:
on (press) {
_root.xnew = _root.mask2._x+(-2-1)*458.5/2;
}
Thatīs the code for the last/fourth button, it pulls the fourth image in place. So thatīs in order.I added this below in the same script:
on (rollOut) {
_root.unloadMovie();
}
It works in a sense. The movie falls into place when I click the button and the movie quits when I move the cursor. But it also means you might shut down the slide show involuntary when you move the cursor going for any of the other buttons.
View 3 Replies
Oct 3, 2011
I have made a simple menu with a 'slider' using this tutorial. What I am wondering is if it's possible to have different actions for one button. Here is my first menu button:
Code:
on (rollOver) {
// slider - Movie Clip's Instance Name. button_1 - Button's Instance Name.
[code].....
View 4 Replies
Apr 3, 2004
How can I make a mc witch I us as a button fuctional for two actions.I mean when I press the button that a clib fades out and when I press again it fades in again I tried it with an if but the it only works one time.This is the script
Code:
but.onRelease = function(){
if (mc._alpha <= 1){
[code].....
View 3 Replies
Nov 21, 2009
I used a tutorial to attempt to set up my code so that after a button is released and an external .swf is loaded the same button can't be activated again (on release or on rollover) until a different button is released.
Here is an example of my actionscript. What I'm trying to do here is just have the button not replay the mc in the over state if it's movie clip is already loaded in[code]...
View 1 Replies
Mar 3, 2010
This is killing me, real simple. I have an mc that has 12 buttons on 12 layersall btns have alpha tweens for 10 frames so the appear like thisbtn 1 alpha fr 1 to 10btn2 alpha fr10 to 20btn3 alpha fr20 to 30 and so on.
at the end of the clip there is a stop.
[Code]....
View 1 Replies
Apr 29, 2011
I have buttons, I can't assigned them simple actions such as GetUrl, like I use to do in flash 8.I am now in CS3 and can't make it work.
View 1 Replies
Jul 28, 2009
I have a project where I have 80 or so invisible buttons, that when clicked, need to load a movie clip from the library into a mc on the stage, as well as cause a rollover and rollout state on a "movie clip button" that's sitting underneath the invisible button. This is in ActionScript 2.0.Here's a example of one of my button actions:
ActionScript Code:[code]....
The way it works is "invis_1_1" is the first invisible button in a group, the 1_1 refers to the button being in the first column and the first row in a grid. The "movie button" it's controlling is "col1row1" which has a "on" and "off" state. When the invisible button is clicked it loads "1_1", which is a movie clip in the library, into a holder movie clip.The dilema I'm running into is I'll need to write this code over 80 times with a slight change each time to the instance names etc. I'm sure there's a way to do this with an array but I'm still new to using arrays.
View 4 Replies
Mar 3, 2011
So I am trying to make a button in flash which when pressed, goes to frame 253, plays until it reaches 264, and then gotoAndPlay frame 527. The code that I used worked, until I added another button which does the same thing but with different frames. Both buttons are on the same page. The buttons seem to work once, then forget what it is they are supposed to do.Here is the code I used:
ActionScript Code:
on (release) {
gotoAndPlay(253);
[code]........
View 3 Replies
Jan 15, 2010
I am using an external .as file for my code. How do I add actions to a button that is not on the stage but its on another frame in the movie (one that user access later). What is the best practice to add actions to items not present at the start?
Of course I could make another copy of the button on frame 1 and add it off the stage in the invisible part. This is what I was doing till now. IS there another way to do this, a more ethical way?
View 2 Replies
Apr 3, 2004
How can I make a mc witch I us as a button fuctional for two actions.I mean when I press the button that a clib fades out and when I press again it fades in again I tried it with an if but the it only works one time.This is the script
Code:
but.onRelease = function(){
if (mc._alpha <= 1){
fadeClip (mc, 100, 4);
}else if (mc._alpha >= 99){
fadeClip (mc, 0, 4);
}}
View 3 Replies
Jul 17, 2004
How do you trigger the actions associated with a button
take for example a button called "buttonGo" that you have specific code in. When you click button b you also want buttonGo to execute its code.
View 1 Replies
Aug 30, 2004
How to repeat the actions of this button?[url]...
Notice the tabs on the left hand side. Go ahead and mouse over them.
View 4 Replies
Dec 5, 2005
i have n nos of btn's on stage .on clicking any btn i want to duplicate a movie clip on stage "circle_mc" & place d copy with equal spacing along y axis...i dont want to manually put the actions on each btn.the actions can be put on the timeline ...like btn.onRelease = function(){actions}the btns r given instance names btn0,btn1...so on..
View 6 Replies
Feb 11, 2007
There was a thread, not sure if it was in AS or Experiments or MX, but is was this "McSlider" .as driven thing. The link below is my adaptation of it. I am even sure some one brought up nesting mcs with button actions. I just can't find the thread.(i.e the boy is an mc inside the slider with a rollOver and RollOut, but they do not work.
View 2 Replies
Jul 11, 2008
I am attempting to fire successive actions from the same button by setting different variables throughout the process like so...(using Fuse to animate)
var spotOne:Boolean = true;
var spotTwo:Boolean = false;
var spotThree:Boolean = false;
var spotFour:Boolean = false;
[code]....
This isn't working for me.
View 8 Replies
Apr 18, 2009
I'm trying to add button actions in a loop.
In the scene i have one empty movie clip.The loop code in this MC clip looks like this [code]...
View 1 Replies
