ActionScript 2.0 :: Ease Functions Not Executing Simultaneously
Jan 31, 2007
I'm making a little movie where, when a button is clicked, a swf file is loaded into a movie clip using the MovieClipLoader object, and on the onLoadInit event, the clip's alpha and _x are both eased using custom prototype methods. When I first test the movie, it works fine - it fades/moves in correctly. If I click the button while it's still easing, it again reloads and looks fine - but for some reason, once I wait for it to fully ease in, when I click the button, it first loads, then the Alpha eases up to 100, and THEN it eases to the _x. [code]...
View 2 Replies
Similar Posts:
Jun 7, 2010
In a custom queue, there's a push() and a pop() function. The pop() may be called any time on an Event.COMPLETE, so does this mean that code can be running in push() and pop() simultaneously? If so, is there a way to prevent the code from being run in both functions at the same time?
View 3 Replies
Mar 19, 2006
I've done some searching around and was wondering if this works. Is it possible to send a function command to a SWF from an HTML page? Basically, a javascript based menu that executes a function in a swf contained on that page.
View 2 Replies
Sep 29, 2009
anybody know a site with a diagram with the ease functions (easeIn, easeOut and easeInOut, from the classes Back, Bounce, Regular, Strong, Elastic and None)? Or is there a way to draw them using ActionScript? Something in the style of:
View 2 Replies
Sep 29, 2009
how i should be executing external functions from a .swf loader...here's my loader function:
Code:
on (keyPress "e") {
_root.createEmptyMovieClip("container", 1);[code].......
i can easily load the swf into the frame, but the colors don't change. Playing coloreffects.swf on its own works fine, just not through the loader. I imagine this is because you can't just operate two levels of AS2 at once...
View 7 Replies
Nov 4, 2009
Is there a way to increase the ease in and ease out effect? It will only let you choose -100 to 100, and I've messed around with the length of the tween, and the FPS of the movie, but I want the acceleration to be greater.
View 7 Replies
Aug 5, 2009
I have a simple motion tween from fr 1 - 52 (x and y property movement only). I create a custom ease - standard 100 ease in and then a 100 ease out. When this ease is applied to the motion, the ease "happens" after fr 52. So the object does not stop until fr 63 (eased out at 63. How can I get the ease to match / ease out to the last keyframe on 52, rather than 63??? See the attached image of the motion editor.
View 1 Replies
Sep 20, 2009
I'm trying to get a prototype working for a website.
What I would like to do is have five buttons at the bottom of my stage, and when I click them, an image fades AND eases in. I have this part finished so far, but the issue is that when I click another button, I want the previous image to fade/ease out before the next one fades/eases in.
Here is my code:
Code: Select all
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code].....
View 4 Replies
Mar 25, 2009
I have a 'master' SWF file that calls in about 6 external .SWF containing graphics. This 'master' also pulls in external .FLVs (some that are video+audio, some that are audio-only) and makes the file the contentPath of my FLVPlayback component. On some of my Point of Interest buttons (numbered buttons that direct the user to view content), both FLV and SWF are being called. Locally (on my own computer), the videos sync together perfectly (graphics changing to match the audio description). But when i test the presentation on a 'testing server' (i.e. the internet) There is a pronounced lag between the SWF and FLV.
My question is: How do I code the AS2 to NOT play either the FLV or the SWF until BOTH have loaded completely? I'm looking for ideas and pseudo-code right now to point me in the right direction. I'm leaning in the direction of an event listener coupled with getBytesLoaded and getBytesTotal. Probably simple as an if statement with a listener and getBytes function?
View 1 Replies
Aug 22, 2009
to load 2 movies simultaniously on the same page but in 2 different HTML layers? see example here: [URL] notice the menu on the bottom of the page. it seems as though thats a seperate movie... (try resizing the browser window to get a better idea...)
View 1 Replies
Oct 6, 2011
I have a series of calculations i'm doing over a bunch of objects stored in a array. Each function is pretty CPU demanding but if you only run one function, it just works fine.
[Code]...
View 2 Replies
Jun 6, 2010
I've got a project thats getting a bit big, so Im taking the actionscript out into separate as files. I want all the basic functions to be in BasicFunctions.as and the make a library for more specific functions. I find that a lot of people use the import statement but I cant get that to work with a simple Hello World trace, yet the include statement works fine (see attached). I understand that import/include work differently, but which is the better method? If import, then is that heavier to work with. Any rate, what's the best way to organise code when it gets to the 1000+ lines?
[Code]....
View 9 Replies
Nov 24, 2009
I would like to make a small player where two sounds* can be compared.
- PLAY and CHANGE buttons
- On pressing PLAY button, two sounds (Sound-A and Sound-B for example) should play simultaneously (at the same time).
- While those two sounds play, Sound-B should be MUTED and Sound-A should be hear.
- On pressing CHANGE button, the situation changes: Sound-A is muted and Sound-B can be hear. And vice-versa.
*two sounds: both songs are the same, but one of them is remastered
View 2 Replies
Jan 2, 2010
Is it necessary to unload Movies in Flash, or can I keep multiple movies loaded simultaneously? Are there memory requirements that make it necessary to limit the number of Flash movies loaded at one time?
View 1 Replies
Aug 5, 2010
I have 2 buttons.There is a MOUSE_OUT event for button 1 and a MOUSE_OVER event button 2.The buttons are right next to each other.Each event leads to a different frame.When the mouse moves from button 1 to button 2, both events get fired, first MOUSE_OUT and then MOUSE_OVER - but the MOUSE_OVER event cuts off the MOUSE_OUT event and doesn't give it a chance to fully execute. To be more clear, for each event, a function is called which has "gotoAndPlay(x)"(x is some different frame number for each)The gotoAndPlay() will go to lets say frame 437 and play exactly 2 frames.But when MOUSE_OVER is fired and it calls my function, it calls the gotoAndPlay() BUT it doesn't get to play the 2 frames.It gets cut off because the MOUSE_OUT gets fired which calls a function which then calls gotoAndPlay() and plays a different 2 frames. How can I allow the first 2 frames to fully play and then the last 2 frames?
View 3 Replies
Oct 22, 2007
I really hope someone can help me with this one! I've been trying to loop several embedded flv files in one flash document. I've found some really useful script that works when applied to one flv file in the document, however I don't really know how to adjust the actionscript so that it applies to the other three flv files on the page.[code]
View 2 Replies
Dec 7, 2009
I'm a graphic designer, so my skills on AS are not that great. However I've managed so far with quite a few websites, until now. What I'm trying to do is the following: I have a main movie (which i'll call for now movie1.swf). I load a movie on Scene2, on level1 (which I'll call movie2.swf). So what I want to do, is to be able to whenever i click on a specific button (which I can place either on movie1.swf or movie2.swf, depending on recomendation), and gotoandplay to a specific frame label on movie2.swf, and gotoandplay a specific frame label on movie1.swf. Is this possible?
View 2 Replies
Nov 3, 2011
Code:
var arrowleft_btn:Button;
var arrowright_btn:Button;
arrowleft_btn.addEventListener(MouseEvent.MOUSE_DOWN, startScroll, false, 0, true);
[Code]....
What I am trying to do to solve my first problem is have the image (which holds several smaller images in it) scroll across the screen when the user clicks on either the right or left arrow found at the top of the screen. If anyone is interested I can send them the file to have a look at? All of the instance names are the samer though, the arrows are buttons and the 'housecompilation3_mc' is a movie clip.
View 2 Replies
Jun 18, 2003
how can i load 2 .swf movies simultaneously through one load movie action button ?
View 7 Replies
Mar 14, 2012
I am creating a flash "video jockey" station. I have 9 videos that are different parts of a song. Each video is loaded upon the loading of the swf with a volume of 0 . When the buttons given are pressed, they unmute and expose the video. I have it set to a 36 second loop. I have coded in a rewind for each video. When I export it for html, the rewind and play no longer matches up. I feel like there may be a simpler way to code what I am doing, and a way to say that all videos should match up based on their location within their 36 second play time. I have included the actionscript3 I have written for two of the videos. Imagine this with 9 total videos and background music all having the same rewind function.
stop();
import fl.video.*;
var pb:FLVPlayback = new FLVPlayback();
pb.source="videoOne_2.flv";
[Code]....
View 6 Replies
Oct 22, 2010
I got a website that i coded in AS3 - inside the website, i use a video gallery that is done in AS2.So the AS3 code just calls for the videogallery .swf and so its not a big problem.Now here is my problem: whenever i close the video gallery section, im using an AS3 command to make the gallery invisible... unfortunatelly, and obviously, the video keeps playing in the background (and since you can't see it, you will just hear the audio).
So since im not able to send a command inside the videogallery .swf - i thought of creating an invisible button, that overlaps with the Close button.that i press 2 buttons at once - one inside the video gallery to stop the playback, and one inside the website, to close the entire video section.
View 3 Replies
Nov 18, 2010
I have 3 external swfs which I load into a mainmovie. I need to preload them to make sure they start at the same time. I just need a super basic preloader, but it needs to load all 3 swf and once loaded, start
View 13 Replies
Nov 4, 2009
I'm trying to find a way to have global functions in my as project, similar to how flash does with stuff like the util functions (describeType()...), where you can just call the function wherever you need it. For example:
[Code]...
So when I call Test(), it prints out "hello world" fine. My problem comes in that I can't change the name of the Test function, and I can't add any other functions without compiler errors. Is it possible to have a load of global functions in one file, or do I have to split them up into separate files like in the example? Also, I know that I can make a Global class and call static functions like Code: Global.doSomething() but I'd like to know if there's a way to do it as flash does it (describeType(), getDefinitionByName(), etc), or rather, how does flash do it?
View 9 Replies
Nov 25, 2010
Is it not possible to call other functions from generic mouse event functions?
Code:
_root.myButton.onPress = function(){
hide();
[code]......
View 6 Replies
Jun 17, 2004
I have one function that puts text in a text field and makes a button goto a url onRelease.The code is like this:
Code:
item.onRelease = function() {
myButton.onRelease = function() {
getURL("http://google.com", "_blank");
}
talk = this.txt;
}
the only problem is that the button doesn't work onRelease. i think that it is because there are too many functions there, but at the same time,
View 5 Replies
Dec 2, 2004
in this example why the values of (12) and (21,39) are lost at the geo and geo1 functions
[code]...
View 11 Replies
Feb 10, 2009
I'm creating a website with an animated intro. I would like the intro and the website to load at the same time using the same preloader.it would be Swf 1 + swf 2 = total bytes
View 7 Replies
Nov 9, 2009
I've created a movie, and have decided that I want to change the timing of one element in the middle of it. I have searched and searched but can't find any way to change not only the length of time this element stays on screen, but also all subsequent action, all of which is on different layers.
Surely I don't have to manually move each element on each layer individually? I've been trying to select multiple layers and move the frame I want, hoping that the frames on other layers would also move by the same amount - but no luck.
View 4 Replies
Feb 3, 2010
Just for tweak purposes. Is it a good idea to load Images simultaneously? Why would i wanna load images sequentially or simultaneously? What are the advantages and disadvantages of the 2 approaches?
View 5 Replies
Apr 2, 2012
What i currently do is just load the video source in FMLE and stream to FMS.The problem is , the stream regularly buffers in low bandwidth situations.
I am therefore thinking of finding a way to rather record the video, then stream the video live into FMS whiles the recording is still going on.
View 4 Replies
