Using one of the tutorial under "Best of Kirupa thread", I managed to modify the script and get a resizable dynamic photo gallery working perfectly. Now, I have an external swf with the following script. It works fine independently but when I load it in the container MC of my photo gallery, it don't. What's wrong with the script and what do I need to double check and change?
im trying to create this custom menu a bit more efficiently. As written, it operates fine glitch free. However, id like to incorporate some easing into the movement of each movie clip.
I've built a code to cyclically move a scene on the bottom of my stage; I've done this to make a slowing-and-stop-easing effect at anytime the command will arrive. The entire scene mc is _x long something like 6000 px. The whole code goes in this way:
1) importing on the stage (with attachMovie) a mc with this code inside:
onClipEvent(enterFrame) { _parent._parent.fondo_mc._x -= countermovement; if (_parent._parent.fondo_mc._x <= -5800) {[code].....
The code goes right, but I need to improve it.Now there is just a variable, I tought to use two vars to implement the whole code in a setInterval, but maybe it's unuseful, and actually I can't use it in the right way.
Second issue: actually when slowAndStop function is called the scene slow too fast, if I take it to 15 it slow better but the scene is running too fast...
The best would be that the scene slow down and stop following: A) a temporal variable (and I can try to implement it with setInterval, that for istance is a cycle)
B) an indipendent moving variable, so that on one side I set the speed, on the other side I set the slow-and-stop in a matter of time with countermovement.I also tried to use a second variable:
var counter:Number = 15; // set the _x increment var countermovement:Number = counter/2;
I'm familiar with how to ease something in using motion math. Easing out would not be that bad either. But how would I script something easing in half way, then easing out the second half? It would start slow, gradually move faster, then slow to a stop at the end. - almost like a sine wave I guess?
In a Flex Mobile project I have a simple itemRenderer where I'm trying to create an "bubble" texting effect, similar to ichat or iphone (just so you get what im going for). But if the text is longer than the screen it runs off, rather than just going down a line.
If I set Group thats holding the rectangle(to create the bubble effect) and the label to 100% it works and keeps it from exceeding the list containers bounds, BUT the group is always at 100% and looks bad, I'm trying to keep the "bubble" JUST AROUND the text.
Anyway so, at the top of my itemRenderer I tried specifying:
And here's my layout I figured since msg_container has a width of 100% I was hoping bubble_lable_group would just not exceed that but...it doesnt...it just runs off. I tried setting a max width but that does not allow you to input percents. And just to say it 1 more time. I know if i set bubble_lable_group width to 100% it works, and keeps it from going off the edge, but then the rectangle "bubble" stretches all the way across and just looks bad.
I am facing a issue in Flash container. I am having a project which has main container which call different SWFs into it. Now I call this main container file into another container, and their problem starts. Many option doesn't work properly which generally have _root, _parent etc...
If I want to run project (main container SWF and child SWFs) into another container file which place on a website. I want to show whole project from this container file so what I need to do?
I have a loop that goes through data from a book and displays it. The book is not consistent in it's layout so I am trying to display it in two different ways. First way(works fine) is to load the text from that section in to a panel and display it. The second way is to create a new panel (panel creates fine) and then add collapsable panels(nested) to that panel. Here is the code from the else loop.
else if (newPanel == false){ // simpleData is just for the title bar of the new panel // otherwise the panel has no content
[Code]....
The error I get is: ReferenceError: Error #1069: Property panel4.4 not found on components.readTest and there is no default value.
I have tried setting the "name" property instead of the "id" property.
I am creating an flex Air project,so mxml file will run. I have circles in one Big circle at one side and will be same on other side.
Now how to drag any circle from any Big circle to other side. Or it could be like any two container having circles, then how to drag and drop circle?
For one circle i am able to do drag and drop.But I want one Big circle on left hand side and one big circle on right hand side .And small circles with class names will be in these big circles.Now i want to drag and drop those small circles in big circles.Big cicles should not move. Even i have tried this code in actionscript
I need to place an image into a container. The problem is that I will not know the size of the image or the container beforehand, so it all has to be dynamic.this is how I started (have not gotten to stage(or container) changing size yet. No matter what I try, either all the images are the same width, or they are all the same height. If some images are portrait and other landscape, I don't want all the images to be X pixels high. In this variation of the code, all the images turn out the same height, regardless of portrait or landscape.
ActionScript Code: var ratio:Number = container.width/container.height;//get the ratio, if width is bigger than height then ratio is greater than 1, else ratio is smaller than 1
I'm currently working on a custom component which extends Canvas (let's call it SuperCanvas) ; it's basically a container that let you zoom & pan its contents. It would be too long to explain why, but I can't use scrollRect, so I was forced to declare a Canvas object (called innerCanvas)... inside my SuperCanvas (I know, not very nice =/) I would like to know if there's a proper way to "redirect" the creation of my component's children in this canvas.
not really that handy with scripting, was wondering if someone knows how to add some easing to this. Right now i gave an mc that rolls out and back, but i would like there to be a bit of ease in ease out on it if possible.on the mc that you rollover is this
I'm having trouble with the new keyframing model in Flash CS4.Say I have a symbol that starts here, then moves over there, then waits, then moves back over there again, etc. etc.Using the new model, all of these movements seem to be considered the same and single tween.If I apply easing, the easing affects the entire range of keyframes. This doesn't make sense? I may want the symbol to slow down when it gets "there" and have different easing for different movements. Does this make sense?
In this documentation it says that flash CS5 should support custom easing, just like old good CS3 and earlier versions of flash.however, this feature seems to be missing from CS5. it says:Click the Edit button next to the Ease slider in the frame Property inspector.but there is no "edit button" in the panel with easing slider.
I've created a page that contains 3 different movie clips that scroll left and right in respose to the mouse. They each move at different rates and create a parallax effect. My question is how do I ease the movie clips in and out of their stop positions? At the moment they all run full speed in and out of a stop.[code]
i have this script that i am using to drag with easing. it works but how do i make sure it stops when it gets to the edge of the movie. Right now since there is easing on it, you can throw the shape right off of the stage. Is there a way it can stop?
I'm trying to create a not that ordinary typewriter. The thing is, that I wan't it to ease. So I just thought that I could use: speed^0.5, but it really doesn't seem to affect the speed?
The idea is, that the first part of the text is written into the textField very fast, and then it types slower and slower...
This code works, but there's no easing, don't now if there's an easy way to add that: [AS]TextField.prototype.typewriter = function(stringy, func) { var myText = this; var i = 0; var intv = setInterval(function () { myText.text = stringy.substring(0, i); i += 2; if (i>stringy.length) { clearInterval(intv); } updateAfterEvent(); }, func); }; var mystring = "here goes the text"; var speed = 10; txt.typewriter(mystring, speed); [/AS]Thanks, Morten
I am creating a vertical menu with sub-links, which expand out once the main link is pressed, pushing all the buttons below them downwards (with easing). Except when i give one of the links a _y position to ease to, it never fully makes it to it, by under 1 pixel, leaving it slightly blurred.For example, i want to ease one of the buttons below the clicked-on button to _y = 300. but it eases to 299.5.
Has anybody found a way to ease motion only between keyframes, not the whole animation? In classic u get separate easings.Generally, I want to convert old tween to new for more control, but it seems to be impossible.
I have a dynamic textfield that loads an xml file and I'm looking for a good tutorial on how to create a custom scrollbar component to scroll the textfield with easing.
Right. I've been trying to make interactive 360 animtions, which consist of 36 separate images which make up the final animation. I've managed to make the images interactive by clicking and dragging them, but I would like to add something extra to it now.I would like to add (not sure if this is the right name for it) frame easing? For example, when the user clicks and drags the 3D object at speed, the object slows down gradually, rather than to a complete stop when the mouse is up. I found an example of this on Flashtunning
well, In Flash CS3, it was actually possible to give an easing instruction to each segment (keyframes) of an animation. In Flash CS4, in between two frames of an Motion Tween, isn't it possible anymore? I'm trying but the easing instruction applies only for the entire Motion Tween.
I've got a png sequence of a 3d object rotating on my timeline. My as3 find the mouse.x and uses math to choose which frame in the sequence to move to. I need to be add easing to the movement.
AS3 in use:
stage.addEventListener(MouseEvent.MOUSE_MOVE,findF rame); function findFrame(event:Event):void{ var frame:int = Math.floor((stage.mouseX/stage.stageWidth) * 31); gotoAndStop(frame); }
Using Voetsjoeba's golden formula, I've made some panels that ease into place. But why can't they start at 0,0? It seems I have to start the panels from the middle of the stage or else they drift off the edge, even with x and y specified in the code.
I am just wandering how do I use the equations I downloaded from robertpenner. Whenever I try even working out of the book I get error messages like
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 350: There is no method with the name 'easeOutBounce'. return(Math.easeOutBounce(t * 2 - d, 0, c, d) * 0.500000 + c * 0.500000 + b);
Why does it say there is no method with the name bounceEaseOut. How I can use these in my flash movies.
