ActionScript 2.0 :: First GotoAndPlay "the Frames" THEN Link
Jan 22, 2009
Im making an "intro" for a website.. first some picture come in and when you click one of them all picture goes to bottom of the flash.. My problem is: I need it to Frist. gotoAndPlay "the frames" THEN link.. the "movie" takes about 3 secounds.. Is there some sort of code i can use to "tell it to wait" and then link? this is what i got so far. (i know its wrong hehe)
knap.onPress = function()
{
gotoAndPlay(42);
}
if(knap._currentframe < 84) {
trace(lala);
} else {
getURL("/1_profil-.htm","_self");
View 1 Replies
Similar Posts:
Mar 19, 2009
I got 2 buttons that i want them to gotoAndPlay at different frames... here is the code
[Code]...
when i play the .swf i get an error message
View 3 Replies
Jul 25, 2009
I am looking for an actionscript that will go to a certain frame in the timeline, play several frames and then jump to another frame in the timeline. Basically, I want to use this on several different buttons that use the same animation sequence to get to another part of the timeline.
The following is a scenario, but not script:
Buttons A and B are on Frame 1. Animation is on Frames 2-20:
When Button A is pressed, go to Frame 2. Play Frames 2-20, then go to Frame 21.
When Button B is pressed, go to Frame 2. Play Frames 2-20, then go to Frame 22.
I am currently doing this in a different way.
Buttons A and B are on Frame 1. Animations for Buttons A and B are the same, but are located on different frames. Animations for Button A would be on Frames 2-20. Animations for Button B would be on Frames 21-39. So...
When Button A is pressed, go to Frame 2. Play Frames 2-20 and stop on Frame 20.
When Button B is pressed, go to Frame 21. Play frames 21-39 and stop on Frame 39.
Do I have to create this extra timeline? Can I just put the animation in a separate movie? How can I play the movie and then connect each button to different parts of the timeline after the movie ends?
View 5 Replies
Sep 29, 2009
created a (what I thought was simple) gallery.I have all the large images on a timeline layer were each image fades in over the course of half a second then stops. I created navigation buttons, next and previous on each frame that are supposed to navigate to the next image. The action script for the nav buttons is different depending on which image (frames) you are on. However, when I publish the swf the next and previous buttons don't go to the frames I prescribe for them in Actionscript, but just go to random frames in the timeline. Also, I have a series of thumbnails that have actionscript that navigates to pictures/frames when clicked so I don't know if they are interacting badly. Does anyone have any idea whats going on?Here's an example of the AS for the previous and next buttons (instance names prev_btn and next_btn):
prev_btn.addEventListener(MouseEvent.CLICK, navback1);
function navback1 (event)
{
[code].....
View 2 Replies
Apr 7, 2010
It seems like no matter where I check, there isn't a clear answer to this particular issue.Rather than blabber on about the code, I think it is important for me to address that I may just not be setting up my document correctly. At present, I created several layers, some in folders, for a basic portfolio website. I have my problems with my main buttons, in my "Sections" folder, where each button is a distinctive layer so it can be animated when it is pressed.I have a button called 'architecture' that is pressed, but instead of just statically moving the frame to the desired content, I want to play 5-7 frames that I tweened for a small transition (sometimes opacity, sometimes sliding mask) that occurs right before the content. All my transitions and everything is just on this one main timeline.
Basically, I sort of want to have the best of both worlds, where I can goToAndPlay, but then stop it at the end of that segment, as to not run into my next frames of content.My first solution was to simply place a stop(); at the end of the transition, but then the menu just locks and stops. Of course this was on my top layer named 'actions.'I then tried applying each event listener to it's buttons' layers, but that resulted in the button simply not working.I segmented up the actions layer into keyframes, but then realized that it didn't call on the event listeners if I did that.
View 2 Replies
Mar 15, 2010
We have 5 buttons that each go to another frame e.g Product, Contact etc. but we want to play the same series of frames (an outro) and then goto the frame that corresponds to the button. Weve tried lots of different examples from the already posted questions and nothing will work. The latest I tried:
[Code]...
View 10 Replies
Jun 13, 2011
I am working with some actionscript that are spread out amongst different frames, and having changing conditions, determines whether to end the sequence (gotoAndStop(1)) or continue (gotoAndPlay(5))
(For easy example):
frame 4=
x=1
frame 5 =
x=x+1
frame 6 =
if (x=10){
gotoAndStop(1)
}else{
gotoAndPlay(5)
}
I understand this easy example could be done several ways on one frame easily, (while x<10, etc).. but my code is so long and complicated, that the way I wrote it, it was easier to have it sort of "loop" between frames. The problem with this is, I think the frame jumping is slowing the coding down. I tried functions, (like having all coding in frame 5 as a function, then calling that function with the "else" in frame 6), but that would only run the function once.. I need it to keep looping.
View 2 Replies
Nov 12, 2010
I have an main.swf that loads home.swf on the stage. In home there are mc's that when clicked take you to different frames inside home.swf I need to have a gotoAndPlay eventlistener off a button which would take the user back to frame one of home.the home .swf has 6 frames with different clips in each frame on one layer, text for the back to first frame on another layer, an invisible btn and an actions on two separate layers
first question :
the individual frames are 7-8-9 the gotoAndPlay action is on frame 7 ONLY the button only works when in frame 7 if 8-9 are not individual blanks why doesn't the button work when in frames 8 and 9?In other words can't I use an action that triggers a function assigned to a button that spans across more than one frame?if the button spans across 7 - 8 - 9 and the action frame is on 7 how can I get this to work?
View 5 Replies
Aug 19, 2010
here is what I am trying to achieve in as3 in as2:
Code:
var randomNumber = Math.floor(Math.random()*3)
if (randomNumber == 0){
gotoAndPlay(1);
[Code]....
on frame 1, 30 and 60 there is a different animation, with this code at the end of each animation it randomly chooses one of the optional frames to play from.
View 8 Replies
Jan 29, 2011
Basically I have a MC called 'plane3.' Inside that MC is another MC called 'plane2.' Inside 'plane2' is an animation on frame 5.(inside the MC 'plane3' the MC 'plane2' is on a classic tween going side-to-side from frame 1 to 99, once it gets to frame 99 the code gotoAndPlay(1); makes it go on loop back to the beginning)My question is how would I go about: when you click 'plane3' it lets the tween continue playing until frame 10, then on frame 10, it gotoAndPlay (100); in the same MC and ALSO plays frame 5 from inside 'plane2'
View 5 Replies
Mar 6, 2012
I am using a mouseEvent listener
iBubble1.addEventListener("click",doStuff);
to call a function that uses gotoAndPlay to send the playback head to a certain animation on the timeline.
function doStuff(evt:Event):void {
gotoAndPlay("popped");
}
Should be so simple. But the first frame of the "popped' animation, often the first 2, do not display. (when testing the compiled app, even the first 3-4 frames often do not display)Without the mouse event listener, using gotoAndPlay("popped"); to move the playback head to this animation from another spot in the timeline works just fine, so that's why I suspect the mouse event is involved in the bug.using
trace(currentFrame);
in the function after gotoAndPlay, does trace the correct first frame number of the animation, but this frame is not displayed, the animation just starts with the 2nd frame, or 3rd..or sometimes 4th.
View 1 Replies
Mar 19, 2010
how to literally describe what I want to achieve. But I believe it is an easy achievement for someone who is a little familiar with Actionscript (2).
I have a movieclip with backgrounds that fades in and out as the timeline within the movieclip plays. What I wanna do I place an actionscript at frame 1, before any of the background plays, that randomizes a gotoAndPlay function that jumps to a decided frames out of frame 2, 77, 152, 227, 302, 377 etc.
It should be a problem to use the same actionscript after each background has been shown? If it is, its no problem, doesnt matter too much. As long as the first background that is getting randomized is different each time you visit the website.
View 3 Replies
Nov 23, 2009
is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
View 1 Replies
Nov 21, 2008
XML text to be used as a link within my flash site.What I mean by this is I have a XML file with a list of shows and at the end of each title and short description and I would like to have a link to the show's dedicated page.I know how to do a URL link but a gotoAndPlay / Stop link doesn't seem to work the same way.. Here is an example of what I mean:
Show Name 1:
Short description
link to dedicated 'page'[code]....
View 1 Replies
May 18, 2010
I want to link a button in my main timeline to a label- frame in a movie clip. The movie clip is called "Adetail" and the label is "on01"... I type in the following script
[Code]...
View 1 Replies
Apr 7, 2009
I've got a Flash page that has links as Movie Clips (Link1-8). The links are to different services, but right now they link to an external website. I'd like to make these link to different frames of another Movie Clip on the same page (Scrolling_Page).I'm not sure how to go about doing this, as all advice I've gotten hasn't worked thus far. It still just opens up a browser window and says it can't display "undefined".I've included the .fla in case no one can understand my gibberish.
View 3 Replies
Jan 12, 2010
I know how to link a combo box to url's but i need to be able to link the data to different frames in my project.
View 7 Replies
Oct 7, 2011
This makes absolutely no sense to me.I'm calling gotoAndPlay(1) every 8 frames:
public function advance():void {
walkDistance += 2;
if(walkDistance >= 16) {
[code]....
View 1 Replies
Nov 9, 2007
For some reason i'm having problems swapping scenes in my flash movie. At first i put the action in a "actions" named layer and a link to a button. So basicly when scene1 loads the frame 1 action is "stop ();". The viewer clicks on button1 which has a code of;
[Code]...
View 1 Replies
Nov 16, 2009
I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Replies
May 2, 2011
there seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Replies
Nov 24, 2011
basically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 Replies
Mar 26, 2009
I have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
View 16 Replies
Jan 7, 2010
Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 Replies
Jan 8, 2010
I want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 Replies
Mar 7, 2011
How to change a link inside the flash element? I have SWF file with set a link inside and I want to change to mine on the website. This thing I need to control the advertisment system.Trying this, but not working:
<style>
#content {
position: absolute;
z-index:2;
[code]....
But you need everytime to put top, left, margin-bottom parameters. Can someone modify it to make working correct without pointing top, left, margin-bottom parameters?
View 2 Replies
Jul 13, 2009
i made a video player with the xml playlist , it's a video channel indeed, it's embed swf in html. but my boss would like me to put a link on the web, when user click the link, it would directly play the specific video inside the video channel. is it possible to do it without server side script but javascript?
View 1 Replies
Jul 20, 2009
I am new to Flash. I bought a template online a couple weeks ago, and for the most part have made all the changes to personalize the page. The page is for wedding videography, and came with a Videos section. However, I do not like the template video player, and would like to have the Videos link on the menu bar go straight to my youtube channel rather than to the flash player. Primarily all changes to the template have been made in a text.txt file, rather than the flash file itself. My question is, how could I change the link on the main page to route to my youtube channel? Here's what it looks like in the text file:
[Code]....
View 3 Replies
Dec 17, 2009
I am literally at the end of my wick with this one! Here's the skinny, so to speak:
home.swf
products.swf
button line mc
[code]........
View 3 Replies
Oct 15, 2009
I have a datagrid with different types of columns, like I have checkboxes, combo boxes and text Inputs as the column types. Now I want one of the column type to a link, with the label "view". All the rows in that column are link with the same label "View" and on clicking it, I want a Pop up window to be opened?
This is my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%">
<mx:Script>
<![CDATA[
[code]....
I didn't know how to bring a link in the datagrid. So used the Text control to display the "View" label. Now If I click this item, "View" in the datagrid, I want the Pop up function, i.e.,defectCommentsPopUp() to be called.
View 1 Replies
