ActionScript 2.0 :: GotoAndPlay Random Selection Between Decided Frames
Mar 19, 2010
how to literally describe what I want to achieve. But I believe it is an easy achievement for someone who is a little familiar with Actionscript (2).
I have a movieclip with backgrounds that fades in and out as the timeline within the movieclip plays. What I wanna do I place an actionscript at frame 1, before any of the background plays, that randomizes a gotoAndPlay function that jumps to a decided frames out of frame 2, 77, 152, 227, 302, 377 etc.
It should be a problem to use the same actionscript after each background has been shown? If it is, its no problem, doesnt matter too much. As long as the first background that is getting randomized is different each time you visit the website.
View 3 Replies
Similar Posts:
Nov 6, 2009
I need to tell a button to go to a random frame of 6 frames. Lets say these frames are 20 to 25.
Now I think I understand most of this except one thing. How do I change this script to pick a number from 20 to 25, rather than 1 to 10?
Here's my starting point:
ActionScript Code:
generateNew = function () {
n = Math.round(Math.random()*10);
};
[Code]....
View 2 Replies
Sep 29, 2009
created a (what I thought was simple) gallery.I have all the large images on a timeline layer were each image fades in over the course of half a second then stops. I created navigation buttons, next and previous on each frame that are supposed to navigate to the next image. The action script for the nav buttons is different depending on which image (frames) you are on. However, when I publish the swf the next and previous buttons don't go to the frames I prescribe for them in Actionscript, but just go to random frames in the timeline. Also, I have a series of thumbnails that have actionscript that navigates to pictures/frames when clicked so I don't know if they are interacting badly. Does anyone have any idea whats going on?Here's an example of the AS for the previous and next buttons (instance names prev_btn and next_btn):
prev_btn.addEventListener(MouseEvent.CLICK, navback1);
function navback1 (event)
{
[code].....
View 2 Replies
Jun 3, 2010
I have a short movie which consists of 6 MCs. What I would like to be able to do is to start the movie on a random clip and then proceed as usual playing each consecutive MC. The movie then loops back round to frame 2 thus avoiding the random selector code which sits on the first frame of the movie.I have tried three different solutions of AS, two of which I got from a 2008 posting on this site from CBadger and although all versions work in Safari and v1 & 3 work in Google Chrome on the Mac. None of them work in Firefox on a Mac (the 1st version displays but doesn't randomise and v2 & v3 don't display at all) and I have not yet tested them on a PC.Here is the code that I have used for each version on the first frame in the root:
Array.prototype.shuffle = function() {
for (var ivar = this.length-1; ivar>=0; ivar--) {
var p = random(ivar+1);
[code]....
View 4 Replies
May 3, 2010
What I want to do is to get the movie to display random images (from a selection) for random amounts of time (subject to minimum and maximum times).
View 3 Replies
Mar 19, 2009
I got 2 buttons that i want them to gotoAndPlay at different frames... here is the code
[Code]...
when i play the .swf i get an error message
View 3 Replies
Jul 25, 2009
I am looking for an actionscript that will go to a certain frame in the timeline, play several frames and then jump to another frame in the timeline. Basically, I want to use this on several different buttons that use the same animation sequence to get to another part of the timeline.
The following is a scenario, but not script:
Buttons A and B are on Frame 1. Animation is on Frames 2-20:
When Button A is pressed, go to Frame 2. Play Frames 2-20, then go to Frame 21.
When Button B is pressed, go to Frame 2. Play Frames 2-20, then go to Frame 22.
I am currently doing this in a different way.
Buttons A and B are on Frame 1. Animations for Buttons A and B are the same, but are located on different frames. Animations for Button A would be on Frames 2-20. Animations for Button B would be on Frames 21-39. So...
When Button A is pressed, go to Frame 2. Play Frames 2-20 and stop on Frame 20.
When Button B is pressed, go to Frame 21. Play frames 21-39 and stop on Frame 39.
Do I have to create this extra timeline? Can I just put the animation in a separate movie? How can I play the movie and then connect each button to different parts of the timeline after the movie ends?
View 5 Replies
Apr 7, 2010
It seems like no matter where I check, there isn't a clear answer to this particular issue.Rather than blabber on about the code, I think it is important for me to address that I may just not be setting up my document correctly. At present, I created several layers, some in folders, for a basic portfolio website. I have my problems with my main buttons, in my "Sections" folder, where each button is a distinctive layer so it can be animated when it is pressed.I have a button called 'architecture' that is pressed, but instead of just statically moving the frame to the desired content, I want to play 5-7 frames that I tweened for a small transition (sometimes opacity, sometimes sliding mask) that occurs right before the content. All my transitions and everything is just on this one main timeline.
Basically, I sort of want to have the best of both worlds, where I can goToAndPlay, but then stop it at the end of that segment, as to not run into my next frames of content.My first solution was to simply place a stop(); at the end of the transition, but then the menu just locks and stops. Of course this was on my top layer named 'actions.'I then tried applying each event listener to it's buttons' layers, but that resulted in the button simply not working.I segmented up the actions layer into keyframes, but then realized that it didn't call on the event listeners if I did that.
View 2 Replies
Mar 15, 2010
We have 5 buttons that each go to another frame e.g Product, Contact etc. but we want to play the same series of frames (an outro) and then goto the frame that corresponds to the button. Weve tried lots of different examples from the already posted questions and nothing will work. The latest I tried:
[Code]...
View 10 Replies
Jun 13, 2011
I am working with some actionscript that are spread out amongst different frames, and having changing conditions, determines whether to end the sequence (gotoAndStop(1)) or continue (gotoAndPlay(5))
(For easy example):
frame 4=
x=1
frame 5 =
x=x+1
frame 6 =
if (x=10){
gotoAndStop(1)
}else{
gotoAndPlay(5)
}
I understand this easy example could be done several ways on one frame easily, (while x<10, etc).. but my code is so long and complicated, that the way I wrote it, it was easier to have it sort of "loop" between frames. The problem with this is, I think the frame jumping is slowing the coding down. I tried functions, (like having all coding in frame 5 as a function, then calling that function with the "else" in frame 6), but that would only run the function once.. I need it to keep looping.
View 2 Replies
Nov 12, 2010
I have an main.swf that loads home.swf on the stage. In home there are mc's that when clicked take you to different frames inside home.swf I need to have a gotoAndPlay eventlistener off a button which would take the user back to frame one of home.the home .swf has 6 frames with different clips in each frame on one layer, text for the back to first frame on another layer, an invisible btn and an actions on two separate layers
first question :
the individual frames are 7-8-9 the gotoAndPlay action is on frame 7 ONLY the button only works when in frame 7 if 8-9 are not individual blanks why doesn't the button work when in frames 8 and 9?In other words can't I use an action that triggers a function assigned to a button that spans across more than one frame?if the button spans across 7 - 8 - 9 and the action frame is on 7 how can I get this to work?
View 5 Replies
Aug 19, 2010
here is what I am trying to achieve in as3 in as2:
Code:
var randomNumber = Math.floor(Math.random()*3)
if (randomNumber == 0){
gotoAndPlay(1);
[Code]....
on frame 1, 30 and 60 there is a different animation, with this code at the end of each animation it randomly chooses one of the optional frames to play from.
View 8 Replies
Dec 22, 2010
How can I make an array in flash as2 and from there select 12 values assigning them to twelve different variables?So far I got this:
quotes = new Array();
quotes[0] = "one";
quotes[1] = "two";
[code]....
View 2 Replies
Jun 9, 2006
i need to be able to make a random selection from three choices. Basically i'll have three seperate .swfs (probably named "1.swf, 2.swf, 3.swf") and also three separate mp3 files (probably named same way).The container .swf will have a function which will probably make a 'random' selection from the three .swfs of which one to load and also make a 'random' selection from one of three mp3 files to load
View 5 Replies
Jan 29, 2011
Basically I have a MC called 'plane3.' Inside that MC is another MC called 'plane2.' Inside 'plane2' is an animation on frame 5.(inside the MC 'plane3' the MC 'plane2' is on a classic tween going side-to-side from frame 1 to 99, once it gets to frame 99 the code gotoAndPlay(1); makes it go on loop back to the beginning)My question is how would I go about: when you click 'plane3' it lets the tween continue playing until frame 10, then on frame 10, it gotoAndPlay (100); in the same MC and ALSO plays frame 5 from inside 'plane2'
View 5 Replies
Mar 6, 2012
I am using a mouseEvent listener
iBubble1.addEventListener("click",doStuff);
to call a function that uses gotoAndPlay to send the playback head to a certain animation on the timeline.
function doStuff(evt:Event):void {
gotoAndPlay("popped");
}
Should be so simple. But the first frame of the "popped' animation, often the first 2, do not display. (when testing the compiled app, even the first 3-4 frames often do not display)Without the mouse event listener, using gotoAndPlay("popped"); to move the playback head to this animation from another spot in the timeline works just fine, so that's why I suspect the mouse event is involved in the bug.using
trace(currentFrame);
in the function after gotoAndPlay, does trace the correct first frame number of the animation, but this frame is not displayed, the animation just starts with the 2nd frame, or 3rd..or sometimes 4th.
View 1 Replies
Jun 8, 2007
I am creating a web site for a kitchen company, there are differen images as headers on each page. But on one of the pages they want a flash animation to slideshow their kitchens. The animation is done, but they want it to start on a random kitchen. I have only started using actionscript and am struggling a bit, I've managed to find some coding, but they don't seem to work. What I'm looking for is a code to sit in the first frame to randomly select either frame 2, 12, 22 or 32 to go to and play on from there.
View 9 Replies
Jul 22, 2006
So this is a bit of an unusual problem. I am building an XML based MP3 player. I'm fairly inexperienced with Actionscript, so I copied the code from a friends music player. The code works great - but the player I am making also has 'highlightable' buttons for each song. It is easy enough to get these buttons to highlight when clicked. However, when first opening the player, it opens a song randomly but obviously the song's button is not highlighted. Is there a way to have the player highlight the corresponding button when opening? The cop-out solution would be to just have it open the first song every time. But the random selection could really make returning to the site a new experience.
[Code]....
View 3 Replies
Apr 6, 2007
i have a number of movieclips. let's say 20. every movieclip contains one black block - and they're all different in size.
i want to put them one by one in random order on the stage until the space on the stage is filled like this: [URL]
in other words: when only 4 movieclips fits on the stage it shows 4 movieclips, when 8 movieclips fits... etc etc
View 1 Replies
Dec 2, 2004
How do I randomly select 1 of 4 tell target movies? (Flash MX Actionscript)
View 1 Replies
Feb 9, 2011
I want my movie, on loading, to start playing from a random frame. I know that in AS2 the code would be
Code:
gotoAndPlay (random (1825));
but I'm using AS3 and I can't figure out how to achieve the same thing here.
View 2 Replies
Nov 23, 2009
is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
View 1 Replies
Jul 30, 2009
I am having trouble getting my flash to start on a random frame.I have looked at many code examples to generate random number then pick this frame based on the generated random number. My problem is that the frames will jump all over the place because (I think) my code is on frame 1 and is being executed over and over causing it to gotoAndPlay different frames in a loop. I just have 5 images that cycle on a timer in action script but would like the initial starting image not to always be image #1(located at frame #1)[code]
View 1 Replies
Jun 27, 2010
-How would I make it so when my clip gets to a certain frame, it will randomly gotoAndPlay a random frame on a different scene?
-All of the frames that I want it to randomly go to are labeled.
View 3 Replies
Feb 17, 2010
I'm having some issues with AS3. I have a slide show as a header for a website all of my pictures are set in the timeline with transitions. What i'm trying to do is have my slideshow goto a random frame onload to ensure a new look to the wbsite on every visit. So here is what I have so far Array for specific random frames
[Code]...
View 5 Replies
Feb 28, 2003
how can i make all mcs (a bunch of them) inside another mc, to gotoAndPlay in a random frame without having to adress each one of them by theyr instance names?
wild guess: a for loop?
View 10 Replies
Sep 17, 2009
I'm a designer working in tandem with a PHP programmer on a project where we will display a random image via flash from a selection of images stored on a database. Accompanying this image is a tagline and a path for a button and these variables are sent via a php script. The actionscript then picks up these vars via loadVars and displays them on screen - well, almost.
The tagline is displaying in the dynamic text box with no problems, but I'm struggling with how to display the image in the empty MC I've created (called 'pic') and also to attach the path to the button I've created (called 'projectURL_btn'). I'm fairly sure it's something fairly simple but I just can't crack it.
[Code]...
View 0 Replies
Oct 7, 2011
This makes absolutely no sense to me.I'm calling gotoAndPlay(1) every 8 frames:
public function advance():void {
walkDistance += 2;
if(walkDistance >= 16) {
[code]....
View 1 Replies
May 12, 2008
In my movie I have a movie clip that I want to circulate between a random selection of 12 frames automatically. Basically I want the movie clip to load like this.
[code]...
I don't mean exactly this order, I just want it to cycle randomly through the 12 frames. How should I go about doing this?
View 3 Replies
Jan 22, 2009
Im making an "intro" for a website.. first some picture come in and when you click one of them all picture goes to bottom of the flash.. My problem is: I need it to Frist. gotoAndPlay "the frames" THEN link.. the "movie" takes about 3 secounds.. Is there some sort of code i can use to "tell it to wait" and then link? this is what i got so far. (i know its wrong hehe)
knap.onPress = function()
{
gotoAndPlay(42);
}
if(knap._currentframe < 84) {
trace(lala);
} else {
getURL("/1_profil-.htm","_self");
View 1 Replies
