I use mcLoader.loadClip action to load an image. I'd like to make a button stop downloading the image in case it isn't loaded 100%. So if the image is loading, when I press the button it will stop loading.
View 1 Replies
wherever I look for scripts is either AS 1.0 or 3.0... I used to work as a cartoon animator (didn't need AS at all) now I'm trying to build up my own site to show my portfolio. I'm having difficulties loading and unloading external swf files. Basically I'm a total newbie, I managed to figure out that you need an empty movie clip where it will be played, and the buttons themselves...
View 8 RepliesI have 2 pages. This script loads up the mainPage_clip
var mainPage_clip:MovieClip = new mainPage_mc();
var diary_clip:MovieClip = new diary_mc();
addChild(mainPage_clip);
[code]....
The other page is diary_clip. I have a button inside mainPage_clip that i want to unload the mainPage and load diary. But if i add this script to the one above i get an error:
diary_btn.addEventListener(MouseEvent.CLICK,diary) ;
function diary (event:MouseEvent):void
{
[code]....
I can load and unload a movie via the "loadClip" and "unloadClip" methods. So far, so good. However, I notice that the movie is not altogether "unloaded".Some of it continues to run even though the visible movie is gone. I know this because there is an "interval" timer started within the movie and I am seeing the effects of that "thread" (ok, maybe its not a thread but thats what it seems like to me. Process, maybe?). Anyway, even though I have used the unloadClip method to unload the clip, I have a feeling that there is a lot more I should be doing to clean up the mess I have left behind. Seeing the effects of the still-running interval timer, I now have visions of memory leaks not far behind.
View 3 Replieshow can I unload a movie clip which is added dynamically?can we create multiple instances of the movie clip?I am adding the movieclip dynamically as below where tLevel
//global variable
var tLevel:MovieClip = this;
var myMovieClip:MovieClip = tLevel.attachMovie("MyMovieClip","myMovieClip",tLe
[code].......
I'm loading jpg's externally into a dynamically created movie clip that then get clicked on to show a larger image. I'd like to be able to click on that MC/larger image to close it once it's loaded. Here's the code I'm using to create the MC and for the life of me can't figure out how to do it after extensive searching on the subject. Basically I'm wanting to go back to the "pre-click" state of the movie when it first loads before any clicking happens.
Code:
_root.createEmptyMovieClip("large_mc", 1);
with (_root.large_mc){
_x=225;
_y=92;
[code]....
but it doesn't work...
I'm using Flex to load external swfs, and casting them as movie clips so I can communicate with them. However, I'm having difficulty unloading the movieclip. I've tried setting loaded_MC = null, but it still continues to run in the background.
public var loaded_MC:MovieClip;
private function init():void
{
loaded_MC = MovieClip(swfLoad.content);
[Code].....
I've created a main page with my main links on top, and a container as my body.I load my pages with this action to the container.
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "production";
container.loadMovie("production.swf");
[code]....
Inside the production.swf files I've created a gallery with a MovieClip that loads from my library to a container1 inside the production.swf. In the galleryMC(from library), Ive created a close button to unload it from the container1. It works fine from my production.swf file, but when it loads to the main page it doesn't unload. This is the ActionScript that I have to unload the Movie Clip.
on (release) {
this._root.container1.unloadMovie();
}
The order of events are this. From the main stage I load a movie clip (movie clip 1), within that movie clip I have a button that loads another movie clip (movie clip 2) and also starts a timer that will automatically unload movie clip 2 . Within movie clip 2 I would like to create a button that stops the timer on movie clip 1 and starts it again.
I need to stop a function in movie clip 1 from movie clip 2 and then start that same function on movie clip 1 from movie clip 2.
This is the code I am using
This is the movie clip 1 code:
PHP Code:
function moreTimerFun(moreTime) {
this.onEnterFrame = function() {
if ((getTimer()/1000)-moreTime>7) {
delete this.onEnterFrame;
[Code].....
I have very annoying and easy (I believe) problem with Macromedia Flash 8. My movie consists of 10 scenes. I wanted them to be played each after another (e.g. scene 1, scene 2, etc.).However, the scenes that consist of movie clips are just flashing and movie proceed to next scene. There is no problem with scenes that where done just in main timeline. I tried to put some action script on these movie clips like:
on (release) {
play ();
}
I'm using a square shaped container (content_holder) to load movie clips which have a lot of animations spilling off the stage.In my container I have a mask which fixes this so all you see is the content within the square.PROBLEM: The width and height of content_holder is not accurate, as it also counts the overflowing animation which is MASKED. As a result this messes with my ability to center and manipulate the clip because its width/height is constantly changing.
QUESTION: Is there a simple way to load a movieclip into a container and LOCK its dimensions to a specific size? So the width is always fixed to the container's OR prevent the masked content from adding to the clip's width & height values?
I have the following code
stop();
positions = [];
imageTotal = 8;
[code]...
It basicly loads some pictures into movie clip holders and they stream horizontally across the bottom of a page.My problem is i cannot get them to continuously loop, at the moment they just cross the screen once then stop.
I have 2 buttons on the root of the flash, i want use those buttons to control the frames of a movie clip, how can it be done?
View 2 RepliesI have a movie clip on my stage which I want to move up 2 seconds into the movie, as if it is popping out of an invisible box. I can do it on the timeline, but wondered if anyone knows how to do it using as2?
View 1 RepliesI'm using a square shaped container (content_holder) to load movie clips which have a lot of animations spilling off the stage.
In my container I have a mask which fixes this so all you see is the content within the square.
PROBLEM: The width and height of content_holder is not accurate, as it also counts the overflowing animation which is MASKED. As a result this messes with my ability to center and manipulate the clip because its width/height is constantly changing.
QUESTION: Is there a simple way to load a movieclip into a container and LOCK its dimensions to a specific size? So the width is always fixed to the container's OR prevent the masked content from adding to the clip's width & height values?
I am having the hardest time trying to get AS to play from within a MC called "content_002".Please remember that this AS is an XML-Driven sub-menu that successfully works on it's own. When I tie it into a MC, it doesn't like to work with my shifting main-menu.
For this post, I'll first send the "combined" .fla file then I will post them apart to see if anyone can find a better way.
trying to get the swf to load and it was somthing so simple I was missing- if I can avoid the hours of frustration this time that would be great. I'd appreciate it if someone showed me how to create a basic button that will act on the contents of a loaded swf...
View 4 Repliesusing flash 8 AS2. I was thinking if it was possible to create a waving moving banner, with some flags of countries moving across it. much like the example below. Is it possible I will create a simple rectangular banner, then animate it in the timeline with flowing flags of a few countries from left to right. then i wonder if actionscript can create a wavy perspective banner that flows from the left to right in a loop or full stop from the movieclip timeline looping forever in it? The red arrow shows how the banner will animate towards the right from the left.
View 1 RepliesI am trying to add x amount of movieclips to the stage with their own unique _x value. Also with each movie clip added i need to add an array with a smiler name. I tried this code.
Actionscript Code:
enemycount = 46;for (i=1; i<enemycount+1; i++) { this["currentenemy"+(i)]=_level0.enemydatabase[0]; this.attachMovie("BrownFox", ["enemy"+i], 101, {_x:100, _y:219});}for (i=enemycount; i<51; i++) { this["currentenemy"+(i)]=_level0.enemydatabase[1];}trace (this.enemy1._x);trace (this.currentenemy45);
under the attachmovie I have ["enemy"+1] but when i trace enemy1 it returns undefined. But when I put ["enemy"+1] it returns the _x value. also if I put _x: i * 5, I only see one movie clip so I have a feeling they all have the same _x and_y value. basically I wanna be able to add 2 enemys to the stage with out over lapping, and the option to add 50 with out too much over lapping (would like to avoid overlapping by also giving various y depths, between 200 and 250)
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
A movie clip called "Symbol_4" contains all of the navigation and frames of my movie.inside of Symbol_4 is a MC called "bottom scroller" which contains "imgbar" which contains "bar" which has a bunch of buttons in it.I want those buttons to link to different frames in the main "Symbol_4" MC.
I've tried putting code on a button like this
Quote:
on (release) {
tellTarget (this._parent._parent._parent) {
}
[code]....
There are no errors in any of this code, but nothing seems to work?!
I am looking to drag a movie clip onto another movie clip. Both movie clips are within a movie clip. I have tried the following and the drag part works but it doesn't stay on the target:
[Code]....
Im making a game where you have a little dude you're walking around with using the arrow keyes. Now i have certain underwater scenes and here i thought it would be nice to add a little movie clip of air bubbles coming out of the dudes mouth.
So i have the movie clip with the animated bubbles laying in the same frame as the scene (where the dude will walk around). Im looking for a script that makes it so that as soon you enter the scene the "bubbles" movieclip will "attach" itself to the "man" movieclip. (Or atleast follow it around)
I dont want to modify the man clip itself with bubbles since then the bubbles will interfere with some hittest i have (and just want the bubbles to be aesthetic)
I am working on a project which there are two .swf file play side by side simultaneously. I need to use one of the file to control the animation in another file.
If they are in same .swf it should be easy. I can just use:
gotoAndPlay("frameNumber")
but there are two .swf now. (lets say movieA and movieB) I think I should use something like:
"LinkToMovieB".gotoAndPlay("frameNumber")
"LinkToMovieB" should be the link to movie clip in the movieB file.
my problem is how do I get the link to movie B's movie clip. or there is other proper way to do this task.
I load my external image into emptymc which is inside mc_container:loadMovie("myimage.jpg", mc_container.emptymc); //placed on main timeline.This works fine. However when I go to a different frame within mc_container(specifically a frame without an instance of "emptymc") emptymc gets unloaded. As soon as I go back to a frame containing "emptymc" it no longer has the jpg.Is there a way I can keep the jpg loaded in emptymc without having to load it again?
View 2 RepliesI've loaded an SWF file into an AS3 project, thing is, I can't unload it. Everytime I use loader.unload, The Flash IDE crashes! I've tried to google the problem, but it seems no one seems to have an answer for it.
View 1 RepliesI'm having a problem unloading an external SWF from my container clip. I've searched all morning for a fix to this problem, with no clear resolution. I thought this was originally a xml update issue, but it's not. A lot of talk about removing child nodes, but I'm not sure what do do there.Here's my code:
PHP Code:
function loadXML(loaded) { if (loaded) { xmlNode = this.firstChild; swiff = []; total = xmlNode.childNodes.length; for (i=0;
[code].....
unloading a SWF from a movie clip. This code is inside a movie clip acting as a button that loads the SWF into another movie clip in the main timeline called "rootbox_mc". Basically when i spam the button, it keeps loading the external SWF over and over the one already loaded, i want it to remove the one already loaded before loading another in its place.
More specifically, i wanted to ask why my if statements were not working, and how do you actually unload a loaded external SWF. I read that you just delete the child, and that's what i tried to do here.
Code:
this.addEventListener(MouseEvent.CLICK, load1Release);
function load1Release(evt:MouseEvent):void {
var checker:Number=0;
[Code]....
ps; This code is someone else's code that i found on the internet. I tried to modify it to fit what i'm trying to do, but it is currently not working.
I am having some problem removing a null object and I realise that I have not been unloading my swf's properly. Could someone take a look at what I have been doing and tell me what I can do to make it better. I am putting my website in an exhibiton of my design work and if it lagged up due to all the clicking it would suck!
Code:
aboutBtn.addEventListener(MouseEvent.CLICK, aboutLoad);
function aboutLoad(e:MouseEvent):void {
ldr.unload();
[Code].....
have this main swf that calls 2 swf. then the 1st swf that he calls was consists of xml images and button.now my problem is upon loading 1st swf then i clicked the button and loads another swf file it should unload the 1st swf file, in my 1st swf i have this switch case ode for button, i put the unload code inside it but it does'nt work.
View 1 Replies
