The "introSplashPage.swf" it loads initially has buttons on it that swap in one or another swiff in its place, for instance, "mediaPage. swf"
This works OK, but in the case of "mediaPage.swf" I'd prefer that the button take the viewer directly to a labeled frame *inside* the swiff. I can't figure out how to do that.
Online, I saw tantalizing code that used...
on (press) to get to the new swiff and then...
on(release){
_level2.gotoAndStop(10);
}
to get to a specific, numbered frame. But I couldn't get it to work, either going to my my frame number or, when modified, to my label.
I have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20 Click on button 2 > plays frames 10 - 15 > Goes to frame 30 Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
I'm adapting this iTunes coverflow style gallery for my own purpose [URL] Basically, the locations of the artwork and the URLs for when you click on a picture are stored in an XML file. Is it possible to adapt the AS or XML so that instead of opening a URL, clicking on a cover jumps to a particular frame on the timeline? Basically what I want to do is have the first and last items acting as previous and next buttons to go to a different frame on the timeline. I guess what i need to do is get the actionscript to do whatever is within and replacing that with the action I want it to perform?
I have a piece of code in AS3 but it doesn't work with AS2:
stop(); function login(event:MouseEvent):void { this.gotoAndPlay("first_page");
[Code]....
But I still have a problem. I have stops in each key frame but when I play the movie it shows directly the first_page section skipping all other frames before it.
I am wanting to fade out of a frame and then fade into another, and the way i was thinking of doing this was to code a tween to alpha 0 and then use the code:
home_btn.addEventListener(MouseEvent.CLICK, startMovieHome); function startMovieHome(e:MouseEvent):void {
[Code]....
I dont know how to ask it to tween and then go to the label "home" once the tween is complete..
What I created was just a test but I can't seem to get it working. What I did was create a very small rectangle at frame 1. Created a tween and then at frame 100 made it a very large rectangle.
Then in my code I wanted the user to MOUSE_OVER something and the rectangle to ease to the length it was at frame 30. However I keep getting this error message:
ArgumentError: Error #2109: Frame label frame 30 not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at Untitled_fla::MainTimeline/test()
I have a maths-based movie on which a number of points are allocated depending on the answers given to a series of multiple choice questions.
At the end of it, a person will score somewhere between 1 and 10 points depending on the answers they gave.
I have got to the stage where the system keeps track of the cumulative score, and at the conclusion, I have a text field on stage, which has an instance name of "results". When the person enters the frame, the results field displays the total number of points scored.
That is ok, but what I actually would like to happen is that the movie jumps to a different frame based on that figure, so that if they score 2, it would take them to the frame labelled "two" and if they score 9, it takes them to frame "nine"
Is there a way of effectively saying:
On frame enter if results.text = 1 go to "one"; if results.text = 2 go to "two" etc etc
I have a video (that im calling from my harddrive) that i would love to play once through,then jump onto the next frame (where theres another video that continues from the end of the first). Why can i not use the following code to jump?
I tried to get this right but it just won't work for me. It's probably something very simple. I have a video in a movieclip on my timeline. On the first frame, I have the stop(); command. I want to be able to hit the SPACEBAR: which results in pausing the movieclip and jumping to frame 2 on the timeline.
I have an external swf (is is an intro, nade in aftereffects)..and it loads in the main timeline of the site with a preloader. Everything is ok, but, when the intro in done plating. It stops and I want do see de site. I mean from the last frame of the external swf, I want to jump to the second frame of the main timeline.
Here is the script: stop(); var req:URLRequest = new URLRequest("intro.swf"); var loader:Loader = new Loader(); function fileLoaded(event:Event):void{ addChild(loader); [Code] .....
I tried to get this right but it just won't work for me. It's probably something very simple. I have a video in a movieclip on my timeline. On the first frame, I have the stop(); command. I want to be able to hit the SPACEBAR: which results in pausing the movieclip and jumping to frame 2 on the timeline.
The situation is as follows:I'm using Action Script 2.0 --- I'm obligated to in the course I'm attending.I have a main timeline that has 3 frames. On the 2nd frame I have a movieclip named mc_nbr. On the 3rd frame I have a button "voltar" that when pressed I want it to "Go and Stop/Play" at frame 3 of the movieclip (that is embedded on frame 2 of the main timeline).
I used the folowing code for the button btn_voltar: on (press) {
DISCLAIMER I've just started to learn flash to fulfill a class assigment. This problem probably has a very easy answer, but I can't find it and now I'm getting close to my deadline.
PROLOGUE The title describes what actions I'm trying to put in a button. I'm making a quiz. Each keyframe has a pic and 4 buttons. The correct answer should show a green V onscreen; the wrong answer should show a red X. After one second, it jumps to a new question in a new keyframe. I've made the X and V as both 12-frame movieclips and 1-frame graphics on the library, but can't seem to make them show up correctly.
1st issue: showing the movie clip/graphic. The movieclip/graphic should appear in the center of the stage *after* you press the button. Currently, the clip is there from the start; can't find a way to make it start invisible, then visible when I click the button. 2nd issue: waiting 1 second before going to next frame.I've tried using setInterval, but failed. Maybe the best way is to use a command that waits for the movieclip to play before making the jump?
I have a video in a movieclip on my timeline. On the first frame, I have the stop(); command. I want to be able to hit the SPACEBAR: which results in pausing the movieclip and jumping to frame 2 on the timeline.
I'm basically creating a huge slideshow presentation for a live show. I decided to put everything into 1 huge fla/swf so that it is more manageable in the future.With AS3, I have made it so that when the user presses the right arrow key, it will seek out the requested frame label and play the next slide.This works well.However,some of the frames need to be played again in later slides.So I would prefer to reuse those frames again, instead of copying and pasting them 10 times.When I do that though,I have no way of switching to the next slide, as I've already set the nextframetoplay variable in my class.
Does anyone have a better way of doing this? Should I perhaps create the screens and just create a holder and use addChild to play them instead of jumping to the frame labels?
I curenttly making a simple online portfolio using flash (as3). Each piece of work i'm displaying resides within a mc on the main time line, and within that each piece of my work lives in its own keyframe, so the site has a basic 'mc.gotoandstop("label")' navigation. I can get my images to fade in using a AS tween, but I want to get the previous image/piece of work to fade out before jumping to the selected key frame and fading in the selected work. Currently, the innards of my button function reads something like:
tween (fadeout) gotoandstop tween (fade in)
but this clearly not the right way to go about it? Is there a way of putting slight delay after the fade out tween in the function? To let it fully fade out before fading in the new work?
is there any way I can link a button inside a MC on frame1 to a frame inside another MC that is located on another frame.Ive got 2 frames in total. On the first frame Ive got an Mc and inside this one Ive got a button that needs to be linked to frame number 50 which is inside a MC located on frame number 2.
I have a flash code where i am loading an AS 2 SWF inside AS 3. The thing is if i put the AS 2 SWF on same domain its working fine but if i put AS 2 SWF on different domain it loads the SWF properly but the "stop()" written inside the AS 2 frame doesnt work... and it keeps on playing all the frames continuously...
I have a flash code where i am loading an AS 2 SWF inside AS 3. The thing is if i put the AS 2 SWF on same domain its working fine but if i put AS 2 SWF on different domain it loads the SWF properly but the "stop()" written inside the AS 2 frame doesnt work... and it keeps on playing all the frames continuously...
Here is the loading code..
var context:LoaderContext = new LoaderContext(); if(Security.sandboxType == Security.REMOTE){ context.securityDomain = SecurityDomain.currentDomain }; var objLoader:Loader = new Loader();var mRequest:URLRequest = new URLRequest("SomeURL.swf");objLoader.contentLoaderInfo.addEventListener(Event .COMPLETE, onSWFLoadComplete);objLoader.load(mRequest, context);
why my "nieuws.swf' is not going to frame 2 or not showing at all when i press the button with the second piece of code on it? The nieuws.swf has a stop on frame 1 and on frame 2. I can see it right away when i take away the first stop. I use the function playNieuws, to make it all happen.
I have an application swf that loads a big external swf with all GUI components/assets (skin) in it.I want to display a progress bar during loading of the external asset swf file but the images for the progress bar are also included in the external swf file.Is it possible to load only a portion of the external swf before loading the rest. The idea is to load the progress bar images from the external swf, then construct the progress bar and than load the rest of the swf. I was thinking to put it on different frames. Frame 1 containing the progress bar graphics and frame 2 the rest of the assets.
I'm working on a mock project (no real client involved) and just sent the site out to some friends to view and give feedback. All of them saw what I was seeing and said it looked great. One person however, said the site looked like it was loading in weird. He sent me a video of what he was looking at. It seems like the contents of my 3rd frame are already loaded in at frame one and the ones that load in dynamically in frame 3 never come in at all. Lots of things going wrong here. Below is a link to the live site and a link to a zip file containing all working files. Inside the zip is also a couple of video files, one is a video of what the site should look like (Vid1.mov) and the other is a video of what my friend was seeing (Vid2.mov).
[URL]
This link is a zip file of all working files: (please keep in mind that I am pretty new to AS3 and realize that my files might not be built in the best way possible - just trying to get it to work at this point)
I'm working on a mock project (no real client involved) and just sent the site out to some friends to view and give feedback. All of them saw what I was seeing and said it looked great. One person however, said the site looked like it was loading in weird. He sent me a video of what he was looking at. It seems like the contents of my 3rd frame are already loaded in at frame one and the ones that load in dynamically in frame 3 never come in at all. Lots of things going wrong here. Below is a link to the live site and a link to a zip file containing all working files. Inside the zip is also a couple of video files, one is a video of what the site should look like (Vid1.mov) and the other is a video of what my friend was seeing (Vid2.mov).This link is a zip file of all working files: (please keep in mind that I am pretty new to AS3 and realize that my files might not be built in the best way possible - just trying to get it to work at this point)
I have two separate slideshows in my document. The slideshow on frame 1 uses ixia_works.xml, the slideshow on frame 5 uses ixia_windows.xml. wrote all of my slideshow code on frame 1 and created a variable to hold the xml file. On frame 5 I assigned the new value of the variable. The slideshow on frame 1 works perfectly; the slideshow on frame 5 won't even load.
Code on frame 1: //in order to work with tweens, necessary to import tween classesimport fl.transitions.Tween;import fl.transitions.TweenEvent;import fl.transitions.easing.*;
I'm working on a mock project (no real client involved) and just sent the site out to some friends to view and give feedback. All of them saw what I was seeing and said it looked great. One person however, said the site looked like it was loading in weird. He sent me a video of what he was looking at. It seems like the contents of my 3rd frame are already loaded in at frame one and the ones that load in dynamically in frame 3 never come in at all. Lots of things going wrong here. Attached is a video of what the site should look like (Vid1.mov) and a video of what my friend was seeing (Vid2.mov).
Also, the link below shows the site live: [URL]
This link is a zip file of all working files: I realize that my files might not be built in the best way possible - just trying to get it to work at this point) [URL]
I have this rather cool code for a _mc on a slope. The only problem I am having is making the sprite.mc change states/animation when the sprite.mc is jumping.here's the code I have:
I am not looking for anybody to write code for me but just give me a few pointers. I want to to put a frame or border around an image in actionscript3. I want to use an image that is considerably bigger than the border. the effect would be that the image would move around but only show what is inside the border. similar to looking through a keyhole ?? my best effort was to do a reverse mask, where the mask did not move but without success.
I am creating a school project and realy need help. I have a graphic that is my guy...and inside that graphics I have his like....animation frames.... like 1-10 frames is when he walks. And I want to know um....how do I make him stop walking GotoAndStop frame 1. but I want to do this when it reaches a frame in my main timeline....
so it is going from 1 to 10 and then back to 1 and then to 10 again....and then he reaches a door and I want him to stop for a second.
So how do I gotoandstop frame 1 inside my graphic?
