I have this...
Code:
waveNoise1 = new Sound();
waveNoise1.attachSound("waveNoise1_snd");
this.waveNoise1_mc.onRollOver = function() {
waveNoise1.start(0,1);
};
Is there a way to detect if this sound has been played, and then (and only then) will the movie continue to the next frame.
p.s. can this be applied so that multiple sounds have to be played through once to continue?
I'm a bit new to AS2 but not too new at all, I have managed to play sounds in various forms but the way I tend to use and am actually using is as follows. I attach the sounds to Sound objects in the moment of loading and play them with "start" in the moment they are needed, not anything too complicated as you can see. The problem is I have noticed that within the author environment or once they are exported, the swf play the sounds ok, but once I upload to a server in the internet (not a portal, just plain html loading the swf) the sounds seems to delay a bit, as this project is a game it breaks a bit the effect when bells are ringed after you scored points.
View 2 Repliesim wanting to create a simple feature in my flash ap that allows a user to select if they want voice overs played or the standard beep beep (fashy sounds) i have three buttons (onBtn, offBtn and rollMe). does anyone know how i could do somting like... if onBtn is selected then.. on rollover 'rollMe' mySound1.start(); else if offBtn is selected then... on rollover 'rollMe' mySound2.start();
View 6 Replieswhen i play the movie and click on any ball it shows the subpage one by one continuously rather than to stop as per the number of their page order.
View 4 RepliesI'm fairly experienced with AS2 and not very with AS3. I've run into a problem with sounds repeating and have set up some simple test files. Yes I'm sure they could be set up in a smarter way, what I'm curious about is why the AS3 behavior is different from AS2.
I'll explain what I've got:
A file with five frames. Nothing on frames 1-4. On frame 5 there is a stop() action, and a movieclip with a sound embedded into it set to "Stream". There is also a button that triggers a gotoAndPlay(1) event when clicked.
In AS2, clicking the button stops the sound (because the clip doesn't exist on frames 1-4), replays the .swf and on frame 5 starts the sound over.
In AS3, the .swf replays, but the sound continues to play (in spite of the clip not being on frames 1-4) and on reaching frame 5, starts playing a second copy of the sound over the first.
I have the main timeline of stop just as a movie clip begins to play. When that clip is done, what is the command i put into the last frame of the timeline of the movie clip to make the main movie timeline get going again?
View 3 RepliesI have the main timeline of stop just as a movie clip begins to play. When that clip is done, what is the command i put into the last frame of the timeline of the movie clip to make the main movie timeline get going again?
View 3 RepliesI have a flash file that has three main buttons on top. When a button is clicked the timeline moves to a that frame (designated with a label) that loads in a particular external SWF corresponding with the button. Those movies are loaded into the same empty movieclip called "presentation"using:loadMovie("splash.swf","presentation"); In one of the external loaded SWF's there is a tween animation (on first frame using TweenLite), that takes place upon loading the SWF. The issue is that when I click a button and go to another frame (which loads another SWF) mid-way through that animation, and come back to that same page with the animation. The animations starts mid-way as if it was running in the back, such as fading in things that shouldn't be faded in yet, etc..? Any clue as to why? EDIT: Maybe this is the cause? The animation code in the first frame of the loaded SWF:
//Animate the bouquet
var bFadeIn:Tween = new Tween(bouquet,"_alpha",Back.easeInOut,0,100,1,true); //106.95
bFadeIn.onMotionFinished = function() {
[code].....
We're making a viral video which is going to be distributed as FLV movie file free for download and redistribution.
I don't know much about flash yet but I can imagine FLV is just some sort of special flash application which can also include arbitrary code.
Is it possible to track how many times that movie file has been played by letting the FLV file perform a server-callback when playback begins?
i have 2 movie clip in different layer but in the same frame (e.g 0 to 10). i have: 1st movie clip contains a red circle that will animate from left to right. 2nd movie clip contains a blue circle that will animate from right to left. i have 2 square buttons (a green and black) that will control the two movie. all i want to do is if i press black square button the 1st movie will play but not the 2nd movie even though they are in the same frame?
and yes i want the 1st/2nd movie to stay after the either of two movie played that's why i put them in the same frame size.
Is there some code that I can use to detect whether a frame has already been played? What I'd like to do is detect yes or no, then jump to a specific frame depending on the condition.
View 11 RepliesI want so code to see if it plays 60 fps (that is my settings) in a movie that must have much power, also, I want to write out for example: it plays 45 fps/60 fps. Is there any way to do this?
View 2 RepliesI want so code to see if it plays 60 fps (that is my settings) in a movie that must have much power, also, I want to write out for example: it plays 45 fps/60 fps.
View 2 RepliesI am using Flash Live Media Encoder 3.2 to stream live ADUIO ( without clicking on video check box) since I am streaming Radio news only. The server is at When I choose to Save File As, it came out a .flv , and can't play back, eventhough its a 129MB file. But if I chose the video check box which straming with video , it came out fine.
View 1 RepliesI am looking to see if there is a way to program to see if movie played on a person machine. I looking to design and flash movie intro. if played go to home page if not play 30 second promo. Is this possible if so where do I begin to look for information on how to do it.
View 2 RepliesI have a movie loaded into a header (which is loaded every time a new page is browsed). This movie spouts out a pop up window after 30 seconds then stops. This works except of course every page time this loads afresh it spouts out a new one.Is there some sort of way to check if movie has been played (say within a 4 hour period) and if it has not to play (do not spout out the pop up)?
View 1 RepliesI am working on this flash website that holds an intro animation which is a .flv file placed in a .fla file. I am trying to figure out the Actionscript needed to tell it to go to the next frame within the same movie once the flv file has played. Right now it just stops and sits on the last frame of the flv file or the flv file just loops.
View 1 Replieshow to stop a movie that is playing on a web page when another movie is played. Basically I have several movies on the page but when a user clicks on Play on one of the movies I want any other movie that might be playing to stop playing automatically. How can I do that so the user doesn't have to do it?
View 1 RepliesI have a inputbox in my movie but when the movie is played there is no cursor showing.I've looked around and found that I need to add the:
Selection.setFocus(inputboxname);
piece of code in the first line of my movie....This still doesn't do anything?
When you put the stop(); action on a frame, does the frame's graphics get played before the movie stops, or does the movie stop before the frame's graphics are played?
View 2 RepliesIs it possible to target a loaded movie within the main timeline and stop sounds in that particular movie only?
View 4 RepliesI am just a rookie in Flash, and came across a problem. I'm trying to create a flash movie that will display time like a TV ident does. I've successfully set it up to get the correct time and play a "tik-tok" sound as each second passes. However, it is to have some background music, and I can't get it to start when I need it - for instance, if the time is 18:00:00 it should start at 00 seconds, it time is 18:00:21 it should start at 21 seconds etc. This is the script I used for ticking:
[Code]...
What should I use for the complex situation as described above? My only guess is that I should sync it to the frames in the background video (behind the clock, running at 24 FPS), but I haven't got a clue how to set that up as well. Can someone please help? If necessary I can upload the .fla file.
I'm using Flash 8 and I'm having an issue getting back to the main stage once a movie clip has played. I have my file set up with three movie clips on the main stage. One just plays which is the banner, there are two rollover buttons on that mc for panel1_mc and panel2_mc. When you rollover to view panel1 it plays fine, but inside I have another button to take you to panel 2. That wont work...this is what I have for code for the button inside the clip:
[Code]....
I followed the mp3player tutorial (part 3) from [URL] and got it working fine. Only problem is that the setVolume I'm trying to use with my music is affecting all my other sounds - button sounds and background sound. I'm aware of the createEmptyMovieClip/attachSound approach and got it working on my other sounds. But Lee's tutorial-mp3player is using a slight different technique, and so my normal approach doesn't quite work.
[Code]....
I want to synchronize sounds perfectly to do a kind of Audio Mixer, using different sounds. [URL] does it perfectly, I've been researching and researching and I just don't know how to do it! How does [URL] synchonize audio so perfectly? you can even change sounds and the new ones will come on time! How do I do that? Is it just Action Script? or something else?
View 1 RepliesIf I create a movie or website with sounds or resources from flash kit can I still sell the finished product?
View 2 RepliesI need code that
1. Turn ALL sounds in the movie off
2. Turn ALL sounds in the movie back on
all with out the user having the press a button. Something like an "onLoad" in javascript so it's automatic.[code]need code to turn it back on when the user hits the next embedded flash movie on the next scene.
im am using this script in my current movie to attach sound using acttion script it also has a stop/start button but i need to now how to add multiple sounds in this way.
[Code]...
I need to control the volume of all sounds in the movie even if they were in the timeline so they do not have an instance name,by AS3.0 code?
View 5 Repliesstop();
function a(event:MouseEvent):void
{[code].........
I have separate sounds in each movie clip, which is what these buttons lead to, but it plays them all at the same time.