ActionScript 2.0 :: On Button Click If Statement?
Oct 7, 2008
I have a flash movie that plays through automatically pausing on each frame for a set amount of seconds.
I used the following code to pause the movie which works 100%:
stop();
var interval:Number = setInterval(
function():Void {
[Code]....
But now i have several buttons on the movie as well, now what i want to happen is that when any one of the buttons is clicked it should ignore the above piece of code and not pause on the frame but stop on the frame.
View 1 Replies
Similar Posts:
Jan 29, 2006
I need help with the 'If' statement I want it so when i click a button till the socre gets to 5 I want it to go to another frame.
View 8 Replies
May 12, 2010
Lets say i have a button on frame 1. And if you press it normal, you ll get to frame 2. But then if you click it on another way, you ll get to frame 3. How do i do that easy?! With another way i mean like shift click or ctrl click or is it an easier way?
View 3 Replies
Nov 17, 2010
One of my objects is an orange ball so when I click on it the first time it will change to yellow color and I want it to remain yellow, and then when I click on it the second time it should change to green and remain green.And finally when I click on it the third time it should go back to its original color. So what I'm trying to say is that I can chooses which color ball I want. So do I use an if statement, that says if click one time then change to yellow? I mean is there such a thing as how many times you clicked, in mouse events?
View 2 Replies
Jul 11, 2009
I have setup some nav buttons on my website. When I click one of the buttons, I want the current page to fade out, and I don't want the other page fading in until the first one is gone. This means I need a statement to go along with each button so that they all get rid of the current page, and don't fade in their respective pages until the first one is gone. Here is my current code:
buttons_mc.about_mc.addEventListener(MouseEvent.CL ICK,disappear);
buttons_mc.about_mc.buttonMode = true;
buttons_mc.about_mc.useHandCursor = true;[code]...
So, what do I need in order for this to all function correctly, once "home_mc" has reached its final frame?
View 5 Replies
Jul 3, 2006
I have a animation in my loader_mc that I want to start at one frame and play to it then stop then when you click on it again I want it to play from a certain point. But what is happening is that it will initially do everything it is supposed to but than mess up after the initial 2 clicks. Check out the onRelease event and you will see what I am currently trying to do. [URL]
View 2 Replies
Jun 24, 2004
i'm trying to use if statements but can't get this thing to work i want to check if another button is visible on release of a button to determine what action to be taken.the 'gotoAndPlay("firstscene",1)' is just there as an outcome, will be changed later. anyway this is the code i've got on the button i'm pressing. blobyellow2 is an instance of a button blobyellow is it because it's an instance that it's not working?
[Code]...
edit: sorry forgot to put what's wrong with the code. it acts as though the statement is correct no matter if it is or isn't.
View 11 Replies
Dec 14, 2011
I have read all threads and can not find a solution but i am not somebody with a lots of knowledge about actionscript so here is my problem i am using this script .
[code]....
the problem is that when i click on the first button loads ok but when click on second still showing the first movie clip in the back ,,,,, i have try everything without luck ,,,, i guess i need to keep reading but will like to find an answer to this situation ,
View 3 Replies
Sep 11, 2010
I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
View 1 Replies
Jun 20, 2010
Basically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script>
<![CDATA[
// Import the Menu control.
import mx.controls.Menu;
[code]....
View 1 Replies
Jun 21, 2010
I am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 Replies
May 18, 2011
I need a counter click button that can storage every click on a txt file or something..
View 1 Replies
Nov 12, 2009
I have a test button i would like to have play a movie where a graphic expands. Once stopped, I would like to be able to click that same button and have the graphic go backwards. I would prefer to have timeline reverse, rather than lengthen the timeline of the mc because then i have to line up the start and end, and if one changes, i have to remember to change the other.
btn_test.onRelease = function(){ if (_root.adinstance._currentframe != 1) { while(_root.adinstance._currentframe != 1) { _root.adinstance.prevFrame(); else { _root.adinstance.play(); }}
[code].....
View 3 Replies
Jul 26, 2010
I am trying to work out this issue in as3 and I'm sure its simple but can't seem to get my head around it. If anyone can see a sollution I would be very happy to hear from you. [URL]..If you click on the red button and click back and previous you will notice that the speed it goes back when you click previous is much slower the further through the slides you go?
[Code]...
This is a simplified version on the code, I'm sure its in this chunk somewhere.
View 4 Replies
Feb 15, 2007
I'm trying assign two functions to one button. The first click does a loadMovieNum to level 1. The second click will unloadMovieNum on level 1. So the first click loads a movie, the second click unloads it. Pretty basic.
I'm guessing it's a simple if statement, but I don't know how to go about it.
Anyone want to take a stab?
View 6 Replies
May 5, 2009
How do you script a Pause of X Seconds on X Frame and also on that frame have a button release statement that can take you forwards or take you backwards, elsewhere in the timeline - Without affecting the 'Pause' statement... therefore not mucking up the timeline and causing it to jump around at the end when all catches up?I take it once a pause has taken place - a button that can take you elsewhere, if clicked on - does not Cancel the initial pause and therefore lies my problem?
View 3 Replies
Jul 7, 2005
I have a button which controls the horizontal movement of a movie clip and next to it I have a button, if the user clicks the button once it moves up half way and when they click it again I would like for it to move up the rest of the way.This script has been applied to the button
on (release) {
if (xpos = 0) {
trig.xposnew = -396;
[code]....
View 4 Replies
Apr 6, 2009
'm trying to write an if/else statement for a mc button that says if mc is on stage don't attach it, else attach it.
View 5 Replies
May 12, 2009
i have 9 images. the one that loads in is based on the number established by the variable loopCount, which increases by 1 each time the main movie loops. Based on what value loopCount has at the time, i want a matching button to appear. For example:
loopCount has the number 5 assigned to it this time around image 5 loads in button 5 needs to load in to match. i am guessing its some simple if statement, but i am at a loss. here is my attempt at the code:
[Code]...
View 1 Replies
Feb 27, 2010
I am having a problem using an if statement in a button. What I want to do is go to a frame dependent on which frame we are already on. For example if I am on frame one and I press the button the first time it will take me to frame five, if I then press the button a second time the actionscript detects we are on frame five so goes to frame ten and so on.
ActionScript Code:
on (release) {
gotoAndPlay(5);
if (currentframe == 5) {
gotoAndPlay(10);
} else if (currentframe == 10) {
gotoAndPlay(15);
} else if (currentframe == 15) {
gotoAndPlay(20);
}}
When I first press the button it takes me to frame 5, the second time I press it goes to frame 10, but when I press after that instead of going to 15 it takes me back to 5 then 10 then 5 then 10 etc and is stuck between going from 5 to 10 and back again.
View 8 Replies
Aug 23, 2011
I have an exam game with different categories of test, all linking to a single results page. I would like to be able to set the back button to return the user to the main page for category they were just in, in case they want to retake the test, or take another part of the test, as some are broken up into multiple parts. I imagine there must be a way to detect what test category the user came from and program an If statement that sets the back button direct them to the main test page/frame. Something like, if user comes from Test1, btnBack=mainTest1, else if Test2, btnBack=mainTest2, etc.
Clearly not the right syntax, but something along those lines in terms of function. I understand how these statements work, but I have just never written one from scratch before, or really done much of anything with them; and have no idea where to begin. At the very least, could anyone direct me to a reliable, easy to follow guide somewhere online that would point me in the right direction? I've seen some guides, but they're not always the easiest to follow, if you've never done what they're instructing you to do, before.
View 9 Replies
Oct 22, 2003
This is what I get in the output window:
Statement must appear within on handler
back_button.onRelease =function () {
View 6 Replies
Sep 9, 2003
I have this email form. Click on the bottom where it says submit track.It takes you to a form section.On that button i have an if statement, but it doesnt work.I only want the playhead to play when all 3 fields have been filled out, i thought i had it right, but i was wrong
View 7 Replies
Oct 22, 2003
This is what I get in the output window: Statement must appear within on handler back_button.onRelease =function () {
View 7 Replies
May 14, 2009
Having a few problems with what I thought was a simple if statement. Here is the code:
[Code]...
I can't quite figure out the small problem with the code. It seems to just bypass the first requirement of the if statement when I do type in the proper input and go straight to the else statement.
View 7 Replies
Nov 25, 2009
Here is my current small piece of code I have on a given "letter" button..
on (release) { if (_root.Acheckmark._visible=true) { _root.AScore = _root.AScore+_root.APoints; } else if (_root.Bcheckmark._visible-true) { _root.BScore = _root.BScore+_root.BPoints; }}
View 1 Replies
Jan 29, 2009
I want to change a variable when a button is pressed. lingo: if this button is pressed then check varexample what number it has if it has a number then gotoAndPlay("example") and add 1 to varexample else, do nothing I'm sure if I get this kind of example down, I'll be able to figure the rest out by myself. =S
View 5 Replies
Mar 2, 2011
I've been struggling with an issue for a while now and can't find a solution. I've got a series of movieclip buttons that I have going between states on ROLL_OVER, ROLL_OUT and CLICKED. It's very straightforward - except for the fact that I can't get the CLICKED function to take precedence over the ROLL_OUT and I was wondering if there was a way to make the ROLL_OUT conditional on the click. ex:
ActionScript Code:
//this is coded on a series of 5 buttons, only 1 is shown as example:
paintings2000_but.addEventListener(MouseEvent.ROLL_OVER,onPaintingsOver);
function onPaintingsOver(state)
[Code]....
So my issue is that I need the ROLL_OUT to be conditional based on whether someone has clicked the button or not; but I can't find a solution for how to do that in this context!
View 3 Replies
Oct 2, 2008
I am working on a video player that will have different Languages. The problem that i am have is that i can get the video to switch but i cant get the video to switch back. I have uploaded the file and here is the code that i have have a problem with.
lang.onRelease = function() {
if play = English)
{
[Code].....
View 1 Replies
Aug 31, 2011
if (variable == 1){
//code
//Execute this code.
} else if (variable == 2) {
//code
[Code]...
I dont want to copy the code from the first into the second and the first and second into the third.
My mind isn't working and there is probably an extremelly simple way to get this working.
I know I could used functions but for some reason it stops the instance referencing working: _root["bullet"+j] doesnt work in a function.
View 7 Replies
