ActionScript 3.0 :: Use An If Statement, That Says If Click One Time Then Change?
Nov 17, 2010
One of my objects is an orange ball so when I click on it the first time it will change to yellow color and I want it to remain yellow, and then when I click on it the second time it should change to green and remain green.And finally when I click on it the third time it should go back to its original color. So what I'm trying to say is that I can chooses which color ball I want. So do I use an if statement, that says if click one time then change to yellow? I mean is there such a thing as how many times you clicked, in mouse events?
View 2 Replies
Similar Posts:
Mar 21, 2012
flash professional cs5 and i dont know how to do thing like in actionscript 3.0
View 1 Replies
Oct 7, 2008
I have a flash movie that plays through automatically pausing on each frame for a set amount of seconds.
I used the following code to pause the movie which works 100%:
stop();
var interval:Number = setInterval(
function():Void {
[Code]....
But now i have several buttons on the movie as well, now what i want to happen is that when any one of the buttons is clicked it should ignore the above piece of code and not pause on the frame but stop on the frame.
View 1 Replies
Jan 16, 2009
I have a flash file that consists of a number of loops that play in series that allows me to change the duration of each part of the movie dependent on what is in the loop. Therefore loop 1 plays x number of times before moving on the loop 2 that plays y number of times and so on. I had worked out all my timings so that each loop last half a second. The number of times each loop plays is controlled by an if statement on the last frame of each loop. So far so good. In this main movie have another movie clip that runs independently of these loops and I noticed that although it was the same length as the main movie taking the loops into account, it would drift out of sync as the main movie progressed and looked as if it was running slow. However by tracing frame numbers of the two movies, I noticed that each time the main movie reaches on of the if statement frames although it appears to increment by one frame the other movie doesn't. By commenting out all the if statement frames both movie run in sync.
Therefore I conclude that a frame that controls the playhead position in this method does not actually last a full frame in duration, but jumps immediately to the new frame as soon as the command is encountered. Can I assume that this is constant and that frames used to move the playhead occupy no time in terms of the main timeline? Is there any documentation on this?
View 0 Replies
Jan 29, 2006
I need help with the 'If' statement I want it so when i click a button till the socre gets to 5 I want it to go to another frame.
View 8 Replies
Nov 26, 2008
I'm using Flash MX 2004 Actionscript.
I'm trying to get control of the time line using a conditional statement.
if (myVars.logged == "Logged") {
gotoAndStop(20);
}
I trace the myVars.logged variable and the trace tells me the value is Logged.
But the above statement won't go to frame 20.
View 9 Replies
Jul 29, 2010
I added in my application universal time, and I gave start and stop time. The process is going smoothly, but if I change my system (local) time, the entire time will be changed. Is there any solution to solve this problem?
[Code]...
View 6 Replies
Nov 7, 2004
My goal is to change the time for setInterval each time the function is called. Planning to replace myInterval = 5000; with a randomized number. My problem is getting setInterval to recognize the myInterval variable from the function.
[Code]...
View 2 Replies
Jul 11, 2009
I have setup some nav buttons on my website. When I click one of the buttons, I want the current page to fade out, and I don't want the other page fading in until the first one is gone. This means I need a statement to go along with each button so that they all get rid of the current page, and don't fade in their respective pages until the first one is gone. Here is my current code:
buttons_mc.about_mc.addEventListener(MouseEvent.CL ICK,disappear);
buttons_mc.about_mc.buttonMode = true;
buttons_mc.about_mc.useHandCursor = true;[code]...
So, what do I need in order for this to all function correctly, once "home_mc" has reached its final frame?
View 5 Replies
Jul 3, 2006
I have a animation in my loader_mc that I want to start at one frame and play to it then stop then when you click on it again I want it to play from a certain point. But what is happening is that it will initially do everything it is supposed to but than mess up after the initial 2 clicks. Check out the onRelease event and you will see what I am currently trying to do. [URL]
View 2 Replies
Nov 20, 2008
i use a code in order to have the time who run during my animation. but when i use setinterval, the speed can't change. how can i change the speed of my 'time'
[Code]....
View 3 Replies
Dec 2, 2009
I'm trying to get it so whenever the object is clicked it reduces in opacity by 10% each time, and if it gets to 10% and it's clicked again it stays at 10% instead of going to 0 I got it to keep going down in opacity fine I just don't know the code to keep it from going lower. this is what I have so far
[Code]...
View 1 Replies
Mar 10, 2010
i suspect the answer here is "no", but i'm wondering if it's possible to set the color of trace statements which appear in flex's console pane. ie, i have a few "levels" of log statements, and i'd like the warnings and errors to really stand out.
View 2 Replies
Jul 6, 2011
I was wondering if there was a way to change the text colour in the if statement.
View 4 Replies
Aug 23, 2011
I have an exam game with different categories of test, all linking to a single results page. I would like to be able to set the back button to return the user to the main page for category they were just in, in case they want to retake the test, or take another part of the test, as some are broken up into multiple parts. I imagine there must be a way to detect what test category the user came from and program an If statement that sets the back button direct them to the main test page/frame. Something like, if user comes from Test1, btnBack=mainTest1, else if Test2, btnBack=mainTest2, etc.
Clearly not the right syntax, but something along those lines in terms of function. I understand how these statements work, but I have just never written one from scratch before, or really done much of anything with them; and have no idea where to begin. At the very least, could anyone direct me to a reliable, easy to follow guide somewhere online that would point me in the right direction? I've seen some guides, but they're not always the easiest to follow, if you've never done what they're instructing you to do, before.
View 9 Replies
Nov 21, 2011
sw1 = text input
asw1 = text input
My problem is that is sw1 when I put in "188" it gives me "28.73" instead of "209.43". If I put in "2" it gives me "28.73" instead of "21.78". So it really doesn't work. My other "If" "Else If" statement works.
Code:
protected function sw1_changeHandler(event:TextOperationEvent):void{
// TODO Auto-generated method stub
if (sw1.text <= String ( Number("18.325")) && sw1.text >= String ( Number("1"))){
(asw1.text = String ( Number("21.78")));
} else if (sw1.text <= String ( Number("24.83")) && sw1.text >= String ( Number("18.326"))){
[Code] .....
View 5 Replies
Jan 29, 2009
I want to change a variable when a button is pressed. lingo: if this button is pressed then check varexample what number it has if it has a number then gotoAndPlay("example") and add 1 to varexample else, do nothing I'm sure if I get this kind of example down, I'll be able to figure the rest out by myself. =S
View 5 Replies
Jan 23, 2005
I am having problems with the
getcoord = xycoordMap[x][y].split(":");
xcoord = getcoord[0].toString();
ycoord = getcoord[1].toString();
xcoord0 = xcoord + "";
ycoord0 = ycoord + "";
code... as you can see in the code I converted three times just to verify that I was working with strings. What happens if you run this script, the variables xcoord0 and ycoord0 magicly change in value when they are used in the IF statement (see the traces). What is going on?? what am I doing worng?? Is there an issue with my 2d Array?
[Code]...
View 3 Replies
Jan 23, 2005
I am having problems with the
getcoord = xycoordMap[x][y].split(":");
xcoord = getcoord[0].toString();
ycoord = getcoord[1].toString();
xcoord0 = xcoord + "";
ycoord0 = ycoord + "";
code... as you can see in the code I converted three times just to verify that I was working with strings. What happens if you run this script, the variables xcoord0 and ycoord0 magicly change in value when they are used in the IF statement (see the traces). What is going on?? what am I doing worng?? Is there an issue with my 2d Array?
[Code]....
View 3 Replies
Jun 10, 2010
I have recently upgraded to FlashCS5, but i am still working in Actionscript2.
I have a simple document, and on a button click i have several different things that appear, i am wondering though if i can get them to come in one at a time, instead of all together, but still clicking on the same button.
View 3 Replies
Jun 1, 2011
i have created a button on first frame which calls second frame which consist of a movieclipnd i have a code which make a thing inside that movie clip to walk aroundthe problem is that when i click the button on first frame i should directly land on second frame(which happens) and as soon as i press arrow keys that object within the movieclip should move(which does not happen until i click on that movieclip) how can i get rid of click it again as we see in many game
View 3 Replies
May 14, 2009
Having a few problems with what I thought was a simple if statement. Here is the code:
[Code]...
I can't quite figure out the small problem with the code. It seems to just bypass the first requirement of the if statement when I do type in the proper input and go straight to the else statement.
View 7 Replies
Aug 31, 2011
if (variable == 1){
//code
//Execute this code.
} else if (variable == 2) {
//code
[Code]...
I dont want to copy the code from the first into the second and the first and second into the third.
My mind isn't working and there is probably an extremelly simple way to get this working.
I know I could used functions but for some reason it stops the instance referencing working: _root["bullet"+j] doesnt work in a function.
View 7 Replies
Oct 10, 2008
The Flash movie contains 2 Text files, one Component button, and 1 component checkbox.The purpose of the application is to load an XML file(works)Populate 2 text fields with information from the XML file(works)Compare the two text fields, if they contain the same information then the checkbox, via AS is told to be selected. (Heres the problem);
Heres the code:
Code:
runCode_btn.onPress = function() {
data_xml = new XML();
data_xml.ignoreWhite = true;
data_xml.onLoad = function(success) {
[code]....
The idea behind this app is that its an electronic form. The user fills it out, the information is then sent to a newly created XML file, months later the open the XML file in flash, and Flash fills out text fields and check and or unchecks Checkboxes based on the XML data.CheckBoxes are mandatory.But I don't see how I'll be able to use them if i can't create and condition statements based on the loaded Data.
View 1 Replies
Mar 11, 2011
I have to make a timer that starts off set at one minute and plays an animation mapped to the time remaining in the timer. I need it to start and stop on a button press, and once it has gone through the minute, I need to be able to add time to it and start it again (with the animation mapped to the new amount of time) by clicking and dragging (or maybe with a slider). I have the basic functions down, but I can't figure out how to get it to start over with the time added by dragging. Here is my code so far:
[Code]....
View 2 Replies
Oct 28, 2011
I'm trying to figure out a way to have one button perform a function if the mouse is "clicked" and perform another if it is "held down". In my example I have the functionality of each working the way I want, but I can't seem to get them to work together (one is commented out right now). I've searched many forums and haven't found the answer, I'm sure it's there just not having luck putting my finger on it.
The only way I can think is with a timer - but a forum member I read somewhere said that was "Ghetto". Plus, I'm not sure I how to make that work right now anyway.See attached for a working version of what I have, or code below...
ActionScript Code:
var myNum:int = 2;
var myDirection:String = "Up";
[code]....
View 1 Replies
Nov 5, 2008
I have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
View 1 Replies
Jun 20, 2010
Basically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script>
<![CDATA[
// Import the Menu control.
import mx.controls.Menu;
[code]....
View 1 Replies
Sep 18, 2010
I have a text box layer on top of the talk bubble. At first it is blank, then I click on Hello Kitty and a random phrase pops up in the text box from the array I created. However, when I click her again she will not say another random phrase. I don't know what I'm doing wrong. Here is the code.
var myPhrases:Array = new Array(); // HELLO KITTY PHRASES FOR TALK BUBBLE
myPhrases[0]="My name is Hello Kitty!";
myPhrases[1]="How are you today?";
[Code]....
View 5 Replies
Nov 10, 2010
I'm creating a video player that have 2 ways of playing the video file. 1st is by streaming. Will play the file directly on each click/ 2nd, is by preloading the video. And only plays it when its fully loaded. But while its preloading, I could still able to click on others video as well to preload the videos and put them on queue for playing.
Currently I'm on the 2nd stage. The problem I'm facing now is it only plays the sound bout not the video. And it overlaps. I'm not sure I have to duplicate the NetConnection or NetStream like how we usually do to duplicate some MovieClip.
ActionScript Code:
public function set newVideo(v:String):void
{
currentStatus = "play";
[Code].....
View 1 Replies
