ActionScript 3.0 :: Use Both CLICK And MOUSE_DOWN Events At Same Time?
Oct 28, 2011
I'm trying to figure out a way to have one button perform a function if the mouse is "clicked" and perform another if it is "held down". In my example I have the functionality of each working the way I want, but I can't seem to get them to work together (one is commented out right now). I've searched many forums and haven't found the answer, I'm sure it's there just not having luck putting my finger on it.
The only way I can think is with a timer - but a forum member I read somewhere said that was "Ghetto". Plus, I'm not sure I how to make that work right now anyway.See attached for a working version of what I have, or code below...
ActionScript Code:
var myNum:int = 2;
var myDirection:String = "Up";
[code]....
View 1 Replies
Similar Posts:
Jun 29, 2010
I want to be able to drag a symbol without firing the CLICK event.Basically I have a pile of thumbnails on the stage that can be viewed by dragging them out of the pile. This also changes the Z order of the one I drag. I also want to be able to click on the one I want once I've found it in the pile.By using Trace() I have discovered that dragging fires CLICK, MOUSE_UP and MOUSE_DOWN and probably a few others as well. When I Double Click it fires all three events twice.How can I drag the thumbnail but not activate the CLICK event.
View 1 Replies
Feb 12, 2012
I have a question about Mouse_Down vs. Click.I read that if
Mouse_Down/Up listeners are used, they'll interfere with the CLICK listener, so
I want to see if it's doable something like this
use a MOUSE_DOWN
listener, by default when it's triggered will turn an _isclick true, but if it's in the DOWN state for more than 150 ms, then _isdown is true. This way,I can click on an MC and trigger an action, or I can drag it if I decide to keep the DOWN state more than 150ms.Note, that the goal is for the same value to check itself at 0ms and enter the _isclick state and then at 150 ms to enter _isdown state
View 2 Replies
Dec 17, 2010
I have no ideas what is going on with my scripts but the MOUSE_DOWN AND CLICK event doesn't work. This is actionscript 3.0. The MOUSE_OVER IS working fine.
var myCell:MovieClip = new MovieClip();
myCell.graphics.clear();
myCell.graphics.lineStyle(1, 0xfff000);//add yellow border
[Code].....
View 1 Replies
Jul 6, 2009
I'm working on a flash navigation piece for a website that involves a "viewmaster" reel that rotates when you mouse down on a button, and then stops when you mouse up. The problem I'm having is that every succesive time I mouse down, the rotation speed increases. Here is my code:
var timer:Timer = new Timer(30);
paintingRotateBtn.addEventListener(MouseEvent.MOUS E_DOWN, paintingRotate, false, 0, true);
paintingRotateBtn.addEventListener(MouseEvent.MOUS E_UP, paintingRotateStop, false, 0, true);
[Code].....
View 2 Replies
Jan 11, 2012
Just wanted to ask if there is any advantage for either using mouse click event or touch tap events, when writing apps for mobiles or tablets (for the iphone especially)?
I know that both of them should work fine, but in term of performance, is anyone better? Are there any things I should be aware of when choosing either?
By the way am using actionscript3 to implement the app.
View 3 Replies
Oct 21, 2010
I'd like to know what is the difference between MouseEvent.CLICK & MouseEvent.MOUSE_DOWN. Because when i use MouseEvent.MOUSE_DOWN for a button to set full-screen view its doesn't work, instead of this MouseEvent.CLICK works. So what was the reason.
View 3 Replies
Mar 19, 2006
I was just wondering whether it was possible to perform a function after a period of time.like +2 to hp every 6 seconds.
View 2 Replies
Jan 16, 2010
I have a dart being launched whenever I click, however I also have buttons on the frame that can be clicked to let you restart the level or main menu. My question is how can I make the mouse click focus on just the buttons? I've tried putting a ".focus" on my buttons but that doesnt work.
View 5 Replies
Aug 12, 2011
I am making a game similar to Touhou in style to learn AS3, but this game is timed to music. Bullet patterns, enemy spawning and special graphics will all be timed to happen at specific times in the music. What I am wondering is:What is the best way to accurately time many(!) events that are required to be very accurate and not slip even a tiny bit out of sync? Example of what sort of timing I am looking:
Spawn 5 different types of enemy's at 1:30 minutes, enemy 1 bullet pattern start at 1:31, bullet pattern will be timed to beat so repeat pattern every 2 seconds. This is a simple and short example of what I am trying to get at.
View 1 Replies
Apr 19, 2011
I have a button that I want to have trigger a rollover effect when rolled over, and when clicked trigger something. I am changing the background image of the whole Flash movie. On Rollover I want it to give you a preview, and on click, I want it to goto a frame in a movieClip where that image is. Here is a pic of my timeline:For instance. I want my first button, "button1" (which is outside of this movieClip on the main timeline) to do the following:When rolled over, it needs to go to the "btn_over" frame label When Rolled out to go to the "btn_out" frame label.And when Clicked to go to frame 2.Currently My button is a movieClip symbol, because I will be doing some simple animations to it. Here is the code I have on my first button: This makes the click work. (and it does work, just not when paired with the second function for the rollover)[code]Does anyone know why the second function is overpowering the first? Or a way I can get the effect I am looking for.
View 2 Replies
Jun 2, 2011
i'm using actionscript 3 in FlashBuilder 4.5in my top-level class that is derived from the Sprite class, i added a keyboard listener:stage.addEventListener( KeyboardEvent.KEY_DOWN, HandleKeyboard );i don't get any keyboard events until i click the mouse button in the screen area - then the events work fine.i tried setting the stage.focus to stage and other various things,
View 8 Replies
Sep 24, 2011
Is it possible to simulate a MouseEvent.CLICK to get fired by just firing first a MOUSE_DOWN followed by a MOUSE_UP.
As per Adobe's doumentation.
"... For a click event to occur, it must always follow this series of events in the order of occurrence: mouseDown event, then mouseUp. The target object must be identical for both of these events; otherwise the click event does not occur. Any number of other mouse events can occur at any time between the mouseDown or mouseUp events; the click event still occurs." [code]...
View 5 Replies
Jun 26, 2007
Banner ads have buttons that ad serving systems use the following syntax to dynamically assign a URL.[code]The clicktag button covers the stage (ad size) and prevents other mouse events like panning. Are there any hacks to get around this? I have a FLA that uses the following AS but the mandatory click tage button disables it the panning functionality.[code]
View 1 Replies
Jun 20, 2010
I am having this problem where i have a movieclip and i want it to be able to be dragged, and clicked. two separate events. But the problem is when i startdrag the MC, then when I stopdrag it, the click event gets called up. here is the code:
outa.box.addEventListener(MouseEvent.CLICK, that);
outa.box.addEventListener(MouseEvent.MOUSE_DOWN, that2);
outa.box.addEventListener(MouseEvent.MOUSE_UP, that3);
[Code]....
View 3 Replies
Feb 11, 2010
I am using the Timer class to time events. Although, I am not sure I have it set up correctly as after a few seconds the events start to get synchronized. first two, then three, etc. Here is an example of the code:
[Code]...
Does anyone know what could be possibly interfering with the Timer for this to happen? It mainly starts happening after you click on an mc and it is removed from the stage (this is for a game).
View 3 Replies
May 12, 2009
Suppose, I created a MovieClip(with instance-name= "myClip") on the stage. If I need to process MouseEvent.CLICK event on this movieclip(myClip), then we use addEventListener(bla.... bla...); method.
Now, my requirement is, in certain case, I do not want to occur any MouseEvent.CLICK events on this same movieClip(i.e., myClip).Then, How to do this? (or) What is the method/class used in this context?
Atlast, My requirement is: How to remove/disable Mouse_CLICK events when occur on a MovieCLip.
View 1 Replies
Sep 1, 2011
I'm design a project for touch interfaces and on my project I have a scrollpane with scrolldrag = true and the source is a sprite with buttons.My problem is that when I drag my scrollpane the mouse click event on the button is triggered. How can I easily prevent this from happening?
View 5 Replies
Sep 27, 2011
I have made a hierarchy in which there is a main page, using add element i have attached a component mxml of type group. There is a single button on main page when clicked it should add children of type group in that group type mxml component along with two buttons. Now using one of buttons i am attaching another component mxml type group. the problem is even they overlap i can still excess the children groups of first group component mxml.
View 2 Replies
Feb 5, 2011
I have 10 buttons each linked to a dynamic text box. 5 integer variables will be passed into swf file (one will be a zero.. which ends the game) When a button is clicked, the first variable is displayed in a text box, when the 2nd button is clicked, the next variable is displayed etc.., until 0 is passed from variables. What action script needs to be initiated to declare the incoming variables and what code is needed on each button to make sure the variables are not repeated?
View 0 Replies
May 12, 2009
My issue starts here:Suppose, I created a MovieClip(say, instance-name= "myClip") on the stage. If I need to process MouseEvent.CLICK event on this movieclip(myClip), then we use addEventListener(bla.... bla...); method.Now, my requirement is, in certain case, I do not want to occur any MouseEvent.CLICK events on this same movieClip(i.e., myClip)Atlast, My requirement is: How to remove/disable Mouse_CLICK events when occur on a MovieCLip.Here, I try to disable the MouseEvents because, The MovieClip must be visible but should not accept any Mouse_CLICK events on it
View 4 Replies
Jul 16, 2009
I have a key.addlistener setup to listen to key events. What I want to be able to do is to dispatch key events by for example a mouse click or just on load. I've tried a lot of possible solutions such as dispatchEvent with type as "onKeyDown" and "keyDown" etc.... but key listener simply do not treat it as a keyboard event.
Code:
var eventObj = new Object();
eventObj.type = "keyDown";
eventObj.code = 13;
eventObj.ascii = 'e';
dispatchEvent(eventObj);
View 2 Replies
Nov 4, 2009
I downloaded the trial of flash cs4 and have created a simnple flash.I am creating a simple slideshow, each of the slides should be clickable and redirect the browser.I created images then imported them and they were automatically converted to symbols.I combined the symbols using some motion tweens.I then created an actions layer and created clasic tween wher I want the user to be able to click.My problem is I cant get it working. I think I am not referencing the right objects.[code]I have tried setting the object reference to the motion tween instance name, the classic tween name on the actions layer and the symbol name none seem to work
View 1 Replies
Mar 13, 2012
I asked for help earlier with a banner and a button that counts roll overs. I am having an issue where the first movie clips in the array play much more often than the others. When I mouse over every couple of seconds or so, only the red mc plays. When I go a little faster the red and blue mcs play back and forth, and when I do a bunch of mouse overs really fast, then all 3 play in order. What part of the code has something to do with amount of time between roll overs? I want it so that even if I roll over once and then again a minute later, I want the second movie clip in the array to play instead of the first again. Here is the code I have in the first frame of the main timeline, as well as a stop(); in the first frame of each mc.
[Code]...
View 9 Replies
Dec 16, 2010
It seems more efficient to store events on the dispatcher if they're never going to change. Isn't creating them costly? Is there some kind of information I'm losing if I dispatch an already-stored event?
View 1 Replies
Jun 27, 2009
I am working on an flash application that requires that all user interaction are stored in a database. The application will have thousands of lessons and needs to keep track of how long each user views lessons and scenes with in the lessons.
I would like to come up with a good solution on how to accomplish this with out having to send a call to a serve side object every few seconds. I could store the data in an as3 object and pass it when the user finishes a scene or exits out of a scene. However this would not work when a user just closes the browser. Maybe I could tie in some JavaScript.
View 0 Replies
Jun 11, 2010
I have one movieclip inside which I created few movieclips...I applied drag drop functionality to main movieclip with which all movieclips inside of it also get dragged along with it..and I want inside movieclips to act as buttons meaning on clicking perticular movieclip it should perform perticular event assigned to it... How to make movieclips into buttons and the main movieclip containing these buttons with drag drop functionality?
View 2 Replies
Jan 18, 2011
I am attempting to use custom cursors with AS3. I created a movie object that i position using:
function mouseMoved(event:MouseEvent) {
mousePointer.x = this.mouseX;
mousePointer.y = this.mouseY;
}
and calling Mouse.hide()
This works fine in that the custom cursor follows the mouse, but I am having troubles using events with the cursor. I have several click events on several buttons. The events do not trigger when using the custom cursor. In my ignorance I would imagine the problem is that the custom cursor movieclip is on top of the button, and so click events are only generated for it, and not the button.
View 4 Replies
Oct 26, 2009
I'm trying to put the text back into a text field on FOCUS_OUT one character at a time. On FOCUS_IN, I want to remove the text one character at a time.
Here's the basic code:
major.text = "ActionScript 3.0";
major.addEventListener(FocusEvent.FOCUS_IN, inFocus);
major.addEventListener(FocusEvent.FOCUS_OUT, outFocus);
function inFocus(event:FocusEvent):void {
major.text="";// want to clear the text one character at a time
} function outFocus(event:FocusEvent):void {
major.text="ActionScript 3.0"; // want to put the text back in one character at a time
}
I attached a fla. that does this in ActionScript 2.0, but I'm trying to do this in ActionScript 3.0.
View 6 Replies
Jun 13, 2011
I have a question regarding the use of mouse clicks events in a multi-dimensional array (or a "2D" array as we refer to them in Java and C++).
Background
I have an array of objects each with a corresponding mouse click event. Each object is stored at a location ranging from [0][0] to [5][8] (hence a 9 x 6 grid) and has the specific column and row number associated with it as well (i.e. tile [2][4] has a row number of 2 and a column number of 4, even though it is on the third row, fifth column). Upon each mouse click, the tile that is selected is stored in a temporary array. The array is cleared if a tile is clicked that does not share a column or row value equal to, minus or plus 1 with the currently targeted tile (i.e. clicking tile [1][1] will clear the array if there aren't any tiles stored that have the row/column number
[0][0], [0][1], [0][2],
[1][0], [1][1], [1][2],
[2][0], [2][1], [2][2]
or any contiguous column/row with another tile stored in the array, meaning that the newly clicked tile only needs to be sharing a border with one of the tiles in the temp array but not necessarily with the last tile stored).
Question
What is a clean, tidy way of programming this in AS3? Here are a couple portions of my code (although the mouse click event isn't finished/working correctly):
[Code]....
View 14 Replies
