I want to dynamically attach a class to a movieClip without using the linkage method. I choose not to because i need to pass constructor vars into it and It can have multiple classes.I want it properly attached so I can reference all the classes functions and variables through the MC. How can I do this?
View 9 RepliesI'm trying to figure out what's wrong with this code:
[Code]....
I have a sample XML file with two images. If I remove either of the items from the XML, it everything displays fine, but with 2 items in the XML, the first item doesn't show an image, but the second does (maybe the first is being attached in a position behind the second?)
I'm getting the classic preloader problem of having the preloader not display until a certain percentage (in this case %30) of the total file has loaded. I am importing the TweenLite class in the second frame, and I am also dynamically attaching MovieClips from the library in that frame as well. I've tried putting a frame between the preloader and the title screen and using the Publish Settings to export all the classes in frame 2, but it does not help at all.
View 7 RepliesSo I just started learning how to code in AS3 in the past few weeks and I'm having trouble finding a good tutorial or example of how I might want to attach external class files to my main .[code]...
View 1 RepliesI m new to Flash. I need to develop Flash application for mobile devices.I have created a class and using that class i created a movieclip.
I have created one more class. And whenever the enter key of the mobile device is pressed i need to create a movie clip using the second class.
How to do this?
[Code]...
I dont know what's the problem? I want to remove or unload the previous movie(Which shows a piechart) and to load another movie(which shows details in a table).
how to eliminate previos attach before move to next attach MC..let say as u can see in my code..I just settign the interval..for 2 second..in other to attach the mc on eby one...so how to set up the code so that if the 2nd mc has attach it'll remove the 1st one attach for certain time...and so on..the scenario like this..
mc1 attach
after 2 second
mc2 attach --> remove mc1
after 2 second
[code]....
I'm having difficulties doing an animation here, all I'd like to do is create 30sec animation for a big screen (without sound). It needs to have an aspect ratio of 16:9 and be exported in the file format of either mov or wmv. Any recommends for settings to do this the best way?
So far I've made my flash document as large as possible at that ratio (36" x 20" ), created the timeline to 30 seconds and started importing my graphics and such. My biggest problem I've had is when I export to mov, the animations are slow and the video time is longer than what I've set. (whereas exported as avi, the animation is normal) Any ideas on how to counter this problem?
s there a possible issue in the way the button is made not coded?I am using Flash CS4. My buttons seem not to work. I do not think issue is in the action script (I am scripting in 3.0).Here is the way I make the button. I add a movie clip on the stage on the over state ( so if you were to double click on that movie clip a new time line would open), at the end of that movie clip there is a simple stop(); code on its own line. I do not add extra frame on the over state.Then I assign the code to the button and of course cross reference its name in the properties and everything is matching up. Just in case here is my code:
floralyte_btn.addEventListener(MouseEvent.CLICK, onClickFloraLytePopUp);
function onClickFloraLytePopUp(event:MouseEvent) :void {
gotoAndStop("61");
}
All of my buttons work fine through the Up, Over, Down, HIt stages without the problem. The functionality works fussy, some of them I have to click twice to go to the specified frame with the UILoader, some do not work at all and some work.I double checked and all of them seem to be done identical.
Is there any way to auto-import as3 classes (internal/intrinsic Flash Player classes at least) using Emacs ?
Looked for as3-mode and actionscript-mode but nothing working was found. as3-mode can import class if it is opened in buffer (but not *.mxml files)
The examples I'll use don't do anything - they're classes without ANY members - no variables, methods, anything.
Let's say I extends Sprite and call it MySprite.
I save it in test.core
[code]...
Now I create another custom class called MyWindow that extends MySprite.
I save it in test.windows
[code]...
Then I create another class that extends MyWindows (the example I'll use is a document class - but that doesn't matter - I've tested using an instance too).
[code]...
Notice that I'm not even trying to instantiate the helper classes - just having them there throws the error.
If there is only a single helper class, everything runs fine.
Also note that - as far as I can tell - this only happens when extending one class from another package, then extending that class with more than one helper object.I'm pretty sure there's no namespace bumps or typographical errors, as this is a very pared-down version of the original application.
EDIT: seems the problem exists even without the crossing packages - even extending MySprite in the document class with multiple internal classes generates this error.
I am creating a library in AS3. Inside the library I make use of a bunch of classes/packages that need not be exposed to the end user of my lib. I want to only expose one of these classes.
I guess my questions are:
1) How are libraries commonly distributed in AS3?
2) Is there a .jar equivalent in AS3 that developers can include, but will only have access/knowledge of the classes I've declared as public?
I have an actionscript project which uses visual symbols from an SWC. I have a CheckoutButton which has the following class associated with it (compiled into the SWC in Flash CS3).
[Code]...
to get a proper content of the following xml-node:
[Code]...
what is the correct way in as3 to get the content so that the " " linebreak stays intact?
I am making a flash game. The game starts off running fast and smooth, however 15 minutes into the game it's noticibly slower. I worry that I am causing memory leaks by not removing objects from my game properly. I understand the whole garbage collection idea, but I still need confirmation.
[Code]...
I finally tried validating my website at W3C, and naturally I got 300 or so errors
As I'm knocking them out, I noticed a lot of these are from the flash embeds. Currently I'm using the traditional method[code]...
Turns out even though it still works, the <embed> tags are no longer necessary and consequently will not validate.
Tried searching around but all I could find were some pretty vague tutorials and looking at sources is nothing short of Greek at this point.
Can I get an example or two of how to properly "embed" an swf?
I have a scroll file, taken from a tutorial, which is linked to a class. After having customized my file I did try it and it works fine. The problem is starting when I try to import this file to an empty MCL in my website. When I have imported all the elements they do not respond and act like single pieces (es. the scroll bar is detached from the scroller). What can I do? I am attaching all the codes and I think it is the reason I cannot import a proper classed swf. The function is Event.ADDED_TO_STAGE. the only major thing is that I do not know how to change my loader class to contain this missing bit.
View 9 RepliesSo using AS3 with Adobe Flash CS4, what is the correct way to pass a variable from a server side script "PHP" to my SWF?
View 3 RepliesAs I understand it if I set the weak reference param to true in my event listeners I don't need to worry about removing the listeners. I'm not really clear what would cause the listener to be set for garbage collection. I would hate to have a situation where the listener was removed before I wanted it to.
View 2 RepliesI'm wondering if there is a proper way to upgrade from Flash CS4 to CS5. What I did was just open existing CS4 project in CS5 and saved it as CS5. It seems to work but I'm wondering: did I miss something in the transition? Do I need to make additional modifications for project to work better in CS5?
View 1 RepliesI'm having a bit of a problem with - what I assume to be - a masking issue. Apparently I can't post images. This may hinder my ability to explain the problem. Oh well, I'll try to make do with just words.
I have four "ground" sprites, each one shorter than the last, that are layered on top of each other. References to them are stored in an array groundLayers[], for easy reference. When a new [not ground] sprite is created - it's given a number which tells it which layers it is between. Herein lies the problem: how do I conceal the new sprites properly?
Without doing anything, they wind up all in front, not layered. My initial solution was to just change their indexes with setChildIndex(), but this proved to be disastrous when I tried to add mouseEvents to the objects. I tried to set the objects' masks to these objects, but that didn't seem to work. I also created separate layers which just contained the "sky" parts of each ground layer and setting the object masks to shoe sky layers, but that didn't work, either.
I have created a class to define my main navigation buttons. I would like to handle which button is clicked/pressed as simply and elegantly as possible, and I figured the best way would be to add a static variable to the class that keeps track of the current button pressed. Here's some quick pseudo-code. Code: class MainButton ext MC static var currentButton:MainButton public var sectionToLoad:String public static function getCurrentButton() public function getSection() button.onPress = currentButton = this // other button actions. // then i can check for what the currently clicked button // is and now access its variables. MainButton.getCurrentButton().getSection() etc. etc. etc. I am curious if this is a "proper" way to go about tracking the buttons. I find it is pretty elegant, but i'd rather make sure that this is a good practice of using static class variables. Also, it looks to me that all custom class definitions become a _global object?
View 1 RepliesI fixed the problem I was having with my TextArea - just as I thought, it was the CR characters throwing off the selection position. Stripping them out fixes everything. Now I have a different problem, though.My program needs to save text files as well as open them, and on a Windows machine, linebreaks are indicated with CR+LF: Wordpad is smart enough to recognize lone LFs as linebreaks, but Notepad isn't (and even then, saving the file in Wordpad will reinstate all the missing CRs). Is there any way I can detect what linebreak system is used by the OS so I can save files properly?
View 5 RepliesI've been reading the tutorials about doing a preloader, but I haven't found exactly what I'm looking for. Here it is: I would like to make a preloader in a specific .fla file, then load an external swf into it. How do I tell flash to get the bytesTotal not only for the preloader, but as well for the external file? Is there a special way to load the swf with a preloader?
View 2 RepliesI have a problem regarding the x, and y coordinates on a flash project of mine. Whenever I set the x and y coordinates for a movieClip:
Code:
function setPos() {
with (mc1) {
_x = 400;
_y = 300;
}}
The MovieClip never gets sent to the proper coordinates.
i'm trying to figure out how to reset or refresh clips that are dynamically attached to another clip based on records returned through xml.asically if the user chooses a different filter for the database query I need to be able to refresh a scrolling list made up of clips which will be different based on the filter.this is what I have for a function. I try to use "attachEmptyMovieClip" but to no avail
Code:
getAll=function(){
members = getMembers.firstChild.childNodes;
[code].....
So I'm only 2 months into actionscript, and have been going along as I go. I've been able to figure out everything up until this point, but this is just confusing me. Right now we have games set up and a home screen to get to all the games. I have a background swf that controls the border of the site and that loads the home page in the center as soon as it starts. The way I have it set up, you get a set of movie clips that when you click on them, they unload the current swf and load the game swf.
This is where I hit the problem. In each game I have a menu where you can choose level1, level2, or level3. Clicking on the game in the main menu works fine and the main menu unloads and the game loads. When you're in the game menu and choose a level I get this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found
[Code]...
I'm trying to record an audio/video program and the resulting .flv is in the wrong directory. It always ends up in application/live. I copied the sample application to application/eTutor and have the following code:
private var rtmpPath:String = "rtmp://x.x.x.x/eTutor"; private var rtmpSession:String = "0_738_0_9_6_6_2012_8_00_00_AM";
...
nc2.addEventListener(NetStatusEvent.NET_STATUS,onFMSNetStatus); nc2.client =
[Code]......
I am writing an ActionScript class and I don't know where the standard place to put it is.In other words, where should I put the package in regards to the hierarchy? In flash.myname.mypackage? What is the standard naming convention? As you can probably tell, I haven't had a lot of experience writing ActionScript classes :)
View 2 RepliesI'm trying to replace instances created by dragging and dropping into a MovieClip through Flash's IDE with actual classes so I can add them to a game loop and have them as actual entities. In other words, I'm trying to create a streamlined way to allow developers to visually add their entities to a platforming engine I'm working on.
This is my third attempt at it and I'm completely stuck.The code below loops through a movieclip that contains an exported symbol with a class linked to it named MyEntity. However, it loses its extension to BaseClass and thus doesn't move when compiled.
It inherits: MovieClip > BaseClass > MyEntity. However when compiled with the IDE it ignores BaseClass and just does MovieClip > MyEntity.
My code is designed to find and store the position of MyEntity, remove it from the container movieclip, add a brand new instance of it (with the base being proper) then set that new instance to the same position of the original.
for ( var i:int = 0; i < LayerInIDE.numChildren; i++ )
{
// first we want to get all the display objects in the layer
// these are objects that were placed from within the Flash IDE (ie. dragged and dropped into the MovieClip
var original:DisplayObject = LayerInIDE.getChildAt( i );
[code]....
This does not work.
It outputs Game.entities::MyEntity [class MyEntity] false. MyEntity is a proper class and DOES extend from BaseClass. However, the issue is the IDE weirdly removes the reference to the base class - as if MyEntity never had a base class. I cannot seem to recreate it as getting the reference to the class also returns that MyEntity never had a BaseClass. However, if I type in var newEnt = MyEntity(); instead of getting the class name through getDefinitionByName it works normally and extends from BaseClass.I need it to extend from BaseClass as that is the main class all entities in my game engine require to use.
i have created a dialpad kind of application which has a bach button at top which takes u to previous screen, a display text box and buttons. all of them are movieclips.
Now the issue is when i press down button, focus is expected to go from prevBtn->display->oneBtn, but the focus goes like prevBtn->oneBtn. Other thing is that if i press up key after going on the screen, the focus goes like callBtn->zeroBtn->eightBtn->fiveBtn->twoBtn->display->prevBtn.
one more observation is if i take the display down after all the buttons, the behavior is normal and focus goes to display.