ActionScript 2.0 :: Random Display Of Movie Clips From Library?
Jan 5, 2010
I'm trying to display random movie clips within the library (See attached fla)
each movie clip needs to display (fade in/fade out) and then proceed to display another movie clip from the library
You'll see how i have tried to do this is by creating a random number
Code:
var myImageSequence = 6;
var RandomLogo = Math.floor(Math.random()*myImageSequence)+1;
gotoAndStop(RandomLogo);
this code works, as it always selects a random frame and plays the movie clip within but then stops.
I need to then select another mc after this animation has finished and so on within a loop
View 3 Replies
Similar Posts:
Mar 19, 2009
(****another title for this could be "how to create a MovieClip variable")
basically, im trying to load random movie clips from the library when i run the function "TRO1".. the logic behind what im trying to do is to to first create an array containing the class names (name given in the "linkage" option) of the movie clips in the library... then randomly select an item from that array... then bring it to the stage.. Here is the code I typed:
var characterArray:Array = ["truck", "car", "boat", "train", "helicopter"]
function TRO1(event:Event):void
{
[Code].....
When i try to run the function, i get the error message "Instantiation attempted on a non-constructor..."
I think the problem is that flash doesn't understand what "randomCharacter" is in the line "var character:MovieClip = new randomCharacter();"... I assume there is a proper way of writing the "randomCharacter" variable so that i can use it in the succeeding line...
View 1 Replies
Aug 4, 2009
How to add random movie clip onMouse Move to stage from many (lets say 50) different movie clips in library? If I wanted to add one movie clip to stage I would do liko so:
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
function onMove(e:MouseEvent):void {
var mc:MovieClip = new Ball();
View 0 Replies
Mar 11, 2011
I am trying to place 6 movie clips in an array and access them in a random manner so that when a button is pressed a movieclip appears and plays randomly. All MCs are in frame one along with this code:
stop();blk1._visible=false;blk2._visible=false;blk3._visible=false;ppk1._visible=false;ppk2._visible=false;ppk3._visible=false;
storeCartons = new Array();storeCartons = (blk1, blk2, blk3, ppk1, ppk2, ppk3);
[Code].....
View 2 Replies
May 3, 2010
What I want to do is to get the movie to display random images (from a selection) for random amounts of time (subject to minimum and maximum times).
View 3 Replies
May 5, 2009
I have 5 boxes on the stage as movie clips, each one with the same animation waiting to be targeted. What I need is a random script that will make them play in "random" order. This should occur after a few seconds of inactivity where they each play, but once there's mouse movement, whichever ones did animate should "reset" or play back to their original positions, (assuming there's more boxes and there's movement before all of them play). I have some code in there for arrays and some random script that isn't working right now. I just need the random setup, really. I may be able to figure out the time delay, (maybe), and then be able to tweak the rest of it for how I need. Right now, I've just simplified everything in a 5 box example hoping someone might be able to work with what I have.
View 6 Replies
Jun 3, 2009
I have a main swf called, main.swf; Inside it I load another movie, skin.swf (this has 10 movieclips in the library with linkage name). What I want is to attach the movieclips from skin.swf inside the main.swf.
But problem is I am not able to attach the movie clip in the main.swf from skin.swf.
View 3 Replies
Jan 30, 2009
I'm new to AS but have some coding background (php, sql, vba) and some basic (non-AS) Flash skills.I want to create a bar chart a bit like this: http:[url].....Really would like some sample code if poss. This is my thinking:
1) Each section of the bar chart will be a movie clip, mc_2, mc_3 etc.
2) There will be an array with Qty, Type, Desc and Name of movie clip (e.g. mc_3).
3) There is a generic bar chart "block" movie clip in the library ("Block")
4) So I plan to loop through the array, attachMovie for each iteration, resize the Movie proportionate to Qty, and colour it by Type.
Problem is: (1) I don't know the right functions to use; (2) Are mc_2, mc_3 INSTANCES of my generic movieclip, "Block" ? (3) should the code sit on the timeline? (4) do i need an empty movie clip to attach the library item to?
Code:
Pseudo code:
n=length of array
for (var i:Number = 0; i < n; i++) {[code]....
The final thing would be a bit more complex with frames etc, but generating the movies would be a start.
View 2 Replies
Mar 6, 2007
If i want to open a movie clip from the library using actionscript - would i use attachMovie or LoadMovie??? I will be opening it with a button.
View 6 Replies
Jul 22, 2008
how to replace a MC by another one placed in the library.
View 2 Replies
Aug 12, 2010
Ok, I'm using actionscript 2.0, and I am trying to make a scrolling image gallery. I have a movie clip with three layers. the first contains a movie clip used as a scroll bar. The second is a mask used to hide the overflow content, and the third contains movie clip thumbnails. when I click one of the thumbnails, it loads a symbol containing a larger version of the picture over top of the thumbnails on the same layer. My problem is, the large image is added at the very top of the movie clip, even when it is scrolled out of sight. I want it to appear in sight, so the user doesn't have to scroll all the way back up to the top to see it. This is annoying and confusing. Is there a way to do this?
Here is the code I used to create the scroll effect (there is actually a whole lot more to the code but it is very long, so I am not adding it now. I will if it is needed though)(Oh, and there is no text involved in this. I just got this code off a tutorial and I haven't changed the variable names yet)
var scrollUpper:Number = 58; var scrollLower:Number = 309;
var textLower:Number = 60; var textUpper:Number = -179;
var scrollRange:Number = scrollLower - scrollUpper; var textRange:Number = textLower
[code].....
View 3 Replies
Sep 21, 2011
How many small size movie clips can I store in the library. On the stage I randomly use 6 of them but this random clips will come from an array full of 3500 m.clips. Is it reasonable , or should I use another way like using xml files.
View 10 Replies
Jun 7, 2010
I'm creating a site and when a particular button in the navigation is clicked I want to load the corresponding "page" movie clip onto the stage and remove any other "page" that is currently loaded. I would also like to have a nice alpha fade between them. I've been searching around and can't find anything. I know this is simple like I need a loader container and I need to export for ActionScript the movie clips I want to load into the container.
View 8 Replies
Sep 30, 2003
I'm trying to make it so that when the main page loads, I have two movieclips, the name of the client's company and their slogan.
The movie clips fade in and out, but I can't get them to appear at different places on the stage.
For example, the page loads, then "Hughes Team Racing" fades in then out in nice fancy font on the right of the stage, how do I make it so that the next time it fades in and out its at a different place?
View 1 Replies
Jun 17, 2009
I have code like this:
ldr = new Loader(); var req:URLRequest = new URLRequest("SWF/Somefile.swf");
ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler); ldr.load(req); Object.addChild(ldr);
That I use to load SWF movies into a flash file. I do this because I am unable to compile clips and put them into my main movie library without breaking the actionscript and causing everything to go haywire.The problem with this is that it will only work so long as the swf movie file is within the vicinity of the SWF/Somefile.swf. I need to make a standalone SWF for my purposes.
View 3 Replies
Jun 21, 2005
I have a menu which attach movie clips from the library, when I first probed the preloader there were not any linked movie clips, neither png files (because each button in the menu attach a picture which is inside the movie clip) now that I have put the movie clips in the library the preloader doesn't work and I don't know why.
View 4 Replies
Mar 24, 2010
I have three movie clips on my stage. Their names in my library are a1_mc, a1_mc2, and a1_mc3. Each of those movie clips on my stage has a different instance name. All of these are connected with an actionscript in the same file.Now, I'd like the movie clips to appear at a random position every time, they are loaded.
I already tried to make a new array and solve this issue with the sort() command. However, that did not work out properly. The positions and instance names of the movie clips on my stage are as follows:
a1_mc
instance name on stage: a1
position on stage: X = 20.0 | Y = 140.0
[code]....
View 1 Replies
May 2, 2011
My project has about 30 movie clips in the library. With an action that comes up every few seconds, I'd like to randomly load one of those 30 clips onto the stage and have it play until it's done.
BUT - once a movie clip is already out, I don't want it to reset or come out again. I'd like the next action to randomly call out one of the remaining 29 clips.
Once each movie clip is done, I need some action to make it go back to the "available" list so that it can be called out again.
I'm guessing that I need to use attachMovie to call out the movie clips, and an array (maybe two) to make sure that I only get one instance of each movie clip. But after lots of searching and various dead ends, I'm just not finding exactly what is needed.
View 2 Replies
Aug 24, 2010
I have a number of movie clips on the stage, and I want them to have a rotation value of either -5 or 5. The rotation values have to be randomly generated.
View 2 Replies
Jun 1, 2004
I know that the site has a page on random movement. Also, is there a way to not have the movie clips pause?
View 2 Replies
Aug 22, 2007
The idea is to load an undefined number (around 200) movieclips (filled with pictures) that are grouped by "family" (probably 30 groups). all this data being retrieved from a mysql database (via AMFPHP).ll of this brings up no problem of any sort.Problems come up in the second stage of the process :I want to place theses groups on the stage at a random position (easy) but I also want them not to overlap. I have tried to work something out with hitTest but I have miserably failed because whe I move one group out of collision, I have to check all of them again... and that brings flash into an almost endless loop that the previewer stops before it crashes my computer.
Of course, google has been (maybe I don't know the right vocabulary) and once again, kirupa is my last hope...For the structural aspect of this question, I have a main MC containing all groups (group0, group1, group2, ...) each group containing the pictures (pic0, pic1, pic2, ...). I also have room on my stage since the main container is draggable
View 4 Replies
Apr 15, 2009
I don't even know how to start with this. I have 15 movie clips on the stage, each with an animation within it, I need them to play at random, one after the other. Ideally, once there's mousemovement, everything should reset.I kind of understand the random function and how to generate numbers, and I know this will probably involve arrays, but I don't know how to put this together.
View 12 Replies
Oct 23, 2010
I just recently tried getting the hand of understanding AS3 from AS3. I am finding it a bit of a struggle to try and understand using random.math.I am trying to use random.math to make each movieclip play randomly and then stop. I tried looking for online tutorials but I only seem to get information of creating a random math number which I don't want.I am not sure I am meant to use a timer or to use random.math function. The idea is to have say 4 movieclips start an animation randomly so when the user looks at the screen, a different movieclip will play.For my button I have put this code for them (photo_mc is my button):
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
[code].....
View 8 Replies
Jun 26, 2009
Currently i am experiencing a problem with pulling Movie Clips from a Library and Tweening it (adding) it to the stage at runtime and then quickly removing it (addChild()) and removeChild(); I have 6 Library items, which i am interested in using.
car_mc1
car_mc2
car_mc3[code].....
My Question:
1) The name is not genereted through the addChild metho, is there an temp Add solution or something that would add on the Fly?
2)The object when working as a single object, gets Tweened out to -200, i just want it to Tween out and get Removed form the stage?
3) The Movie Clip remains on the screen while another instance is brought on when using static naming convetion (this is just to say that i have tested it),I only want the object to be available for the Tween, nothing else
View 6 Replies
Sep 4, 2009
All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
View 2 Replies
Dec 9, 2009
I know this is probably really simple but it is frustrating me. All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
View 1 Replies
Sep 18, 2005
Basically, I have movie1, movie2, movie3, movie4 in the library, with linkages.
These are just 5 frame clips, with a single dummy_mc moving statically over the 4 frames.
I need these to be picked randomly and placed (each has its own set of co-ordinates where it should appear) on the stage at a random set interval (ie, every 2-3 seconds).
There are also 7 items (item1, item2, etc) in the library.
So once one of the 4 movies has been placed on the stage, I need one of these 7 items to randomly attach itself to the dummy_mc within that movie (and, I guess, generate instance names etc)
View 6 Replies
Feb 18, 2009
boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
View 1 Replies
Sep 24, 2009
making a simple animation with about 10 "coins" on screen. I have a movie clip that animates another movie clip flipping over. I want to pull a random movie clip from the library into the nested clip so that on each "flip" a random coin face comes up.I've put all the clip names into an array (coin1,coin2,coin3,etc.)I think it would be described as _root.coin_container.coin_animation.random_coin_hereThere will be 10 coin_container's on the main stage, with coin_animation nested inside. At the beginning of the animation a random movie clip from the array should be called into coin_animation, then coin_animation will run through a few frames, repeat, call another random movie clip and repeat.
View 2 Replies
Oct 13, 2011
I'm trying to generate multiple stars in the stage, but I keep getting an action script error.
stop();
var i;
var arrayStars:Array;
for(i=0; i<70; i++) {
[Code].....
View 1 Replies
