I don't even know how to start with this. I have 15 movie clips on the stage, each with an animation within it, I need them to play at random, one after the other. Ideally, once there's mousemovement, everything should reset.I kind of understand the random function and how to generate numbers, and I know this will probably involve arrays, but I don't know how to put this together.
View 12 Replies
I have 5 boxes on the stage as movie clips, each one with the same animation waiting to be targeted. What I need is a random script that will make them play in "random" order. This should occur after a few seconds of inactivity where they each play, but once there's mouse movement, whichever ones did animate should "reset" or play back to their original positions, (assuming there's more boxes and there's movement before all of them play). I have some code in there for arrays and some random script that isn't working right now. I just need the random setup, really. I may be able to figure out the time delay, (maybe), and then be able to tweak the rest of it for how I need. Right now, I've just simplified everything in a 5 box example hoping someone might be able to work with what I have.
View 6 RepliesI have 35 movie clips named mcMyObject1, mcMyObject2, etc. to mcMyObject35Each time the playhead enters the frame this code sits on, I want all of these 35 movie clips to be placed on the stage in random orderI want each one of these 35 movie clips to land on one of these X coordinates: 57, 187, 317, 447, 577, 707, 837 and on one of these Y coordinates: 53, 183, 131, 443, 573. (It's a 7 x 5 grid)Movie size is 1024 x 768Here's my code, which doesn't work:
stop();
var myXArray=[57, 187, 317, 447, 577, 707, 837]; //cordordinates for x
var myYArray=[53, 183, 313, 443, 573, 573, 573]; //cordordinates for y
[code]......
how to sequence movie clips to play in a certain order. I want to play one movie clip that is animated using actions and then once that clip is finished, play the next one (naturally, to create some sort of design.)If I have two MC's that have separate scripts on them - how would I go about playing the first movie clip and once that animation is finished playing the next one?I've tried placing a 2ndmovieclipname.stop () style script at the end of the first movie clip.I am currently using Flash MX 2004.
PS - I do not have my clips animated with frames, so I don't believe the option to gotoAndPlay (frame x) is available to me.
i need to combine these two scripte (first one creates array to play movie clips in a order fro left to right of the screen depending on position ) each script works corectly if used on there own. but i want to combine them
var videos:Array = new Array("mc1", "mc2", "mc3", "mc4");
var busy:Boolean = false;
for(var i = 0; i<videos.length; i++)[code]....
I am trying to place 6 movie clips in an array and access them in a random manner so that when a button is pressed a movieclip appears and plays randomly. All MCs are in frame one along with this code:
stop();blk1._visible=false;blk2._visible=false;blk3._visible=false;ppk1._visible=false;ppk2._visible=false;ppk3._visible=false;
storeCartons = new Array();storeCartons = (blk1, blk2, blk3, ppk1, ppk2, ppk3);
[Code].....
Ive tried to impliment everything I could find. No luck. I have an xml playlist with external .as files for an mp3 player. Here is my code. My code is below.
// Setup sound object
var s:Sound = new Sound();
s.onSoundComplete = playSong;
[Code].....
I'm having issues displaying movie clips in the correct order. I'm pulling in data from an xml file, in this case images and then create movie clips to hold them. I'm getting the right order from the actual Array when looping through the xml file but when I create the clips the order gets all screwed up. how to order the clips exactly the way they are in the array?
#########loop that creates the clip########
for(var b = 0; b<story_arr.length; b++){
if(story_arr[b].nodeName != "title"){
[Code]....
I'm using AS3 in CS4. I have a problem which i can't get past: I have a button which when clicked I wish it to play two movie clips (blind_mc, text_mc) when clicked.. however I do not wish them to play at the same time (as the script below achieves).. but to play one after the other.
I cannot put them on the same layer or join the two togther for many reasons including -- I have many different buttons i wish to apply this too all with different number of movie clips and orders of play, therefore I would have to create excessively long layers for each and every click.
function goHome(e:MouseEvent):void {
blind_mc.play();
text_mc.gotoAndPlay(2);
}
I'm trying to make it so that when the main page loads, I have two movieclips, the name of the client's company and their slogan.
The movie clips fade in and out, but I can't get them to appear at different places on the stage.
For example, the page loads, then "Hughes Team Racing" fades in then out in nice fancy font on the right of the stage, how do I make it so that the next time it fades in and out its at a different place?
i'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I have three movie clips on my stage. Their names in my library are a1_mc, a1_mc2, and a1_mc3. Each of those movie clips on my stage has a different instance name. All of these are connected with an actionscript in the same file.Now, I'd like the movie clips to appear at a random position every time, they are loaded.
I already tried to make a new array and solve this issue with the sort() command. However, that did not work out properly. The positions and instance names of the movie clips on my stage are as follows:
a1_mc
instance name on stage: a1
position on stage: X = 20.0 | Y = 140.0
[code]....
My project has about 30 movie clips in the library. With an action that comes up every few seconds, I'd like to randomly load one of those 30 clips onto the stage and have it play until it's done.
BUT - once a movie clip is already out, I don't want it to reset or come out again. I'd like the next action to randomly call out one of the remaining 29 clips.
Once each movie clip is done, I need some action to make it go back to the "available" list so that it can be called out again.
I'm guessing that I need to use attachMovie to call out the movie clips, and an array (maybe two) to make sure that I only get one instance of each movie clip. But after lots of searching and various dead ends, I'm just not finding exactly what is needed.
I'm trying to display random movie clips within the library (See attached fla)
each movie clip needs to display (fade in/fade out) and then proceed to display another movie clip from the library
You'll see how i have tried to do this is by creating a random number
Code:
var myImageSequence = 6;
var RandomLogo = Math.floor(Math.random()*myImageSequence)+1;
gotoAndStop(RandomLogo);
this code works, as it always selects a random frame and plays the movie clip within but then stops.
I need to then select another mc after this animation has finished and so on within a loop
I have a number of movie clips on the stage, and I want them to have a rotation value of either -5 or 5. The rotation values have to be randomly generated.
View 2 RepliesI know that the site has a page on random movement. Also, is there a way to not have the movie clips pause?
View 2 RepliesThe idea is to load an undefined number (around 200) movieclips (filled with pictures) that are grouped by "family" (probably 30 groups). all this data being retrieved from a mysql database (via AMFPHP).ll of this brings up no problem of any sort.Problems come up in the second stage of the process :I want to place theses groups on the stage at a random position (easy) but I also want them not to overlap. I have tried to work something out with hitTest but I have miserably failed because whe I move one group out of collision, I have to check all of them again... and that brings flash into an almost endless loop that the previewer stops before it crashes my computer.
Of course, google has been (maybe I don't know the right vocabulary) and once again, kirupa is my last hope...For the structural aspect of this question, I have a main MC containing all groups (group0, group1, group2, ...) each group containing the pictures (pic0, pic1, pic2, ...). I also have room on my stage since the main container is draggable
(****another title for this could be "how to create a MovieClip variable")
basically, im trying to load random movie clips from the library when i run the function "TRO1".. the logic behind what im trying to do is to to first create an array containing the class names (name given in the "linkage" option) of the movie clips in the library... then randomly select an item from that array... then bring it to the stage.. Here is the code I typed:
var characterArray:Array = ["truck", "car", "boat", "train", "helicopter"]
function TRO1(event:Event):void
{
[Code].....
When i try to run the function, i get the error message "Instantiation attempted on a non-constructor..."
I think the problem is that flash doesn't understand what "randomCharacter" is in the line "var character:MovieClip = new randomCharacter();"... I assume there is a proper way of writing the "randomCharacter" variable so that i can use it in the succeeding line...
I just recently tried getting the hand of understanding AS3 from AS3. I am finding it a bit of a struggle to try and understand using random.math.I am trying to use random.math to make each movieclip play randomly and then stop. I tried looking for online tutorials but I only seem to get information of creating a random math number which I don't want.I am not sure I am meant to use a timer or to use random.math function. The idea is to have say 4 movieclips start an animation randomly so when the user looks at the screen, a different movieclip will play.For my button I have put this code for them (photo_mc is my button):
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
[code].....
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Repliesboards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
making a simple animation with about 10 "coins" on screen. I have a movie clip that animates another movie clip flipping over. I want to pull a random movie clip from the library into the nested clip so that on each "flip" a random coin face comes up.I've put all the clip names into an array (coin1,coin2,coin3,etc.)I think it would be described as _root.coin_container.coin_animation.random_coin_hereThere will be 10 coin_container's on the main stage, with coin_animation nested inside. At the beginning of the animation a random movie clip from the array should be called into coin_animation, then coin_animation will run through a few frames, repeat, call another random movie clip and repeat.
View 2 RepliesI'm trying to generate multiple stars in the stage, but I keep getting an action script error.
stop();
var i;
var arrayStars:Array;
for(i=0; i<70; i++) {
[Code].....
What I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
How to add random movie clip onMouse Move to stage from many (lets say 50) different movie clips in library? If I wanted to add one movie clip to stage I would do liko so:
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
function onMove(e:MouseEvent):void {
var mc:MovieClip = new Ball();
code of loading random movie clips for example fac1_mc,fac2_mc,fac3_mc and etc, i want them to display random on my screen with tween transition i'm gna post the fla so you can see what i want to do, or the other way is to make more external swf's with picture animated and load them random with a 10sec between them. here is the link to my .fla with movieclips animated, and dunno how to make them to display random and animated
[Code]....
how to create a random continuous flow of movie clips, The movie clips are actually pieces of text flowing from left to right across the stage at a very slow frame rate, with the text randomly changing position and size.
View 4 RepliesI am trying to create a program using random motion of two movie clips and uses hitTest to determine whether the two objects collide with each other.
I've gotten hitTest to work with the original movie clips, but when the user loads more movie clips (via a button and duplicateMovieClip):
[Code]...
how to do a random internal movie clips NOT calling external mcs with loadmovie?Let's say I have two internal mc's with instance name : my_mc1, my_mc2 and I want them to load randomly in starting in frame 2 here what I did so far:
var tab_mc = [this.my_mc1, this.my_mc2];
function randomMC(tab_mc) {
var i=tab_mc.length;
var r = (Math.floor(Math.random()*i);
[code]....
