I have a MC containing a picture and a button. I have a "rollover" on my MC like, if the mouse rolls over, the MC plays.. But then, as i have a rollover command over the MC, the button in the MC seems not to be working anymore.
View 3 RepliesI'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesI want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesTake a look at the following sites; and notice their menus. Both have a rollover and rollout on their buttons, and when the button is hit the button stays down until another button is pressed. In the scissor sisters site, the neon bar still fades out after another has been pressed.
Franz Ferdinand
Scissor Sisters
I am trying to achieve this myself with my own site, which you can view in progess here:
My Site
I have mastered the button rollOver and rollOut effect, in which i gathered the code from a kirupa tutorial. My problem is, getting the neon bar to stay underneath teh last button that has been pressed.The main movie is located on the main timeline in frame 2, because frame 1 contains the pre loader.
The actions for frame 2 of the main timeline are:
Code:
stop();
movieLoader.loadMovie("news.swf");
total = movieLoader.getBytesTotal();
loads = movieLoader.getBytesLoaded();
[code]....
Now the buttons are not buttons, they are movieclips, which are located on the stage, and have instance names of b1 for news, b2 for biography etc etcInside the movieclip, the animation of the neon bar fading in takes 25 frames, and this has a stop action on the end.
This code is placed on the first frame:
Code:
stop();
news.onEnterFrame = function(){
if(rewind == true)
[code]....
So now my problem is to make sure that the last button clicked leaves the underline bar down until the next button is pressed.
I started working on a little page of mine, and I already ran into some trouble hehe. I'm kind of learning as I go along. Heres the script I'm having some trouble with:
ActionScript Code:
this.qmbacking.onRollOver = function() {
//tweens rolling in the menu
[code]......
I'm working on a project, and it's going OK. What I want to do is for the user to rollover a button/object, and a little pop-up box will show up, and it will have some text/photos/... Pretty routine stuff. That I can accomplish without a problem...
Now, what I want to add in there is also a hyperlink that will open a Web page in a new window. And that's where I get stuck. It won't let me.
I assume it's because part of the rollover thing in the button symbol. That's how I'm doing it so far.
So, is there anything I can do going that route, or do I need to take another approach?
I'm thinking the other option would be to create a movie clip, which would hold the pop-up box and the photos and the like, then make a button within that which would hold the hyperlink. Then, I could create an object right on the timeline with a rollOver that would trigger the movie-clip instance.
Im having a problem getting a Rollover to work. I have a picture with an opaque box over it and when you scroll over the opaque box i want it to tween out and the picture become a clickable area...then when you roll off the opaque box returns to it original position. I can get the box to move...but i think i have too many event listeners and its looping. this is the effect im going for.
View 0 RepliesI am creating a photography website, and I wanted to have captions below my photographs appear on the rollover of an info button, and disappear when its off. How do I do that? Also, I used an image array to load the images, and there are 18 images in the gallery, when there is a new image the caption has to change....
View 7 RepliesThere is a flash which have a small navigation on the buttom. There is a small arrow on the buttom when the mouse rollover on the arrow the arrow is gone dissaper and the navigation show on the stage. When i rollout the mouse its collaps but when my mouse pointer is in the swf area. If i have rollout quickly form the navigation out of the swf area (on html). It's not working.
View 3 RepliesI am trying to get a rollover button to go from one scene to another. I have been succesfull with this action before with a static button but now can't get it to work. The file can be downloaded from the following location: [URL]..For some reason I can't upload it with this message.
The button is named "btn_1" and I have only applied the action in the Main scence. The button should take the visitor to the scene titled "Korean War."
Anyone knows the best way probably to make a rollover button? there are plenty of ways, but I want to know which for you is the best. =)
View 1 RepliesI have not used flash in a while and im just trying to get a button to fade in and out when rolled over ... every time I export it, it just plays ...
View 1 RepliesI've created a flash movie, and I want to make it a banner. I had an idea in mind to have the movie load and play in loop. When a user rolls over the movie (entire movie) the movie changes to something else (like an info movie). [URL]. Attached is my FLA file
View 5 RepliesI am new to flash and peretty much lost when it comes to actionscripting. I am trying to use a movie clip as a rollover button. I have it working, but when the mouse goes over the rollover graphic, the graphic starts to flicker and I have no idea why. Can someone take a look at what I have and let me know what I did wrong. Here's the file I'm using: [URL]
View 1 Repliesive got a rollover button on frame 1with a bit of tweening i have 3 buttons stacked on top of each other on frame 20with a transparent square behind them set to rewind if hovered overthe code on frame1
Actionscript Code:
stop();b1.addEventListener(MouseEvent.MOUSE_OVER,blar );function blar(event:MouseEvent):void{gotoAndPlay(2);}
[code]......
Getting this little button to properly highlight in it's "over" state when it is behind another object with transparency.[url]...
View 1 RepliesI was wondering how to create a button that will animate with rollover and rolloff? For example, if I have a box and when you rollover, the box will slide up and a text slides down. and once you roll off, the box will slide back down to its original place and text will slide back up behind the box?
View 8 RepliesI am trying to add the following action to a rollover button: on (release) { gotoAndPlay(", );}
The buttons are in the button layer.
For some reason the file wouldn't attach, but can be found at this address: [URL]
I have made a movie that loads many sub movies into itself and I want an information box to appear when the mouse pointer rolls over each movie. Some of the movies just play and loop so to get the box to pop up I just load the movie then attach an invisible button over it in the same size and position, which works fine. The problem is that some of the movies are interactive and have internal buttons that respond to the mouse rolling over them, so if I put a external button over them their interactivity is blocked. I also want to avoid putting custom code that targets the parent movie into the loaded movies so I don't have to adjust every movie I want to load. Is there a way to keep the interactivity of the loaded movie but still detect a mouse rollOver?
The scale and position of the loaded movies changes continually, but the only way I can think of of achiving what I want is to write code that continally calculates the size and position of the loaded movies and compares the position of the mouse pointer with them and brings up the info box if a hit is detected. This would be fairly complex
I'm currently working on a project (AS2 in CS5) that contains a lot of small dots that are set up as buttons with rollovers. This has been problematic since the rollovers will sometimes appear behind some of the other buttons.
I did a forum search and found information about the swapdepths function that can be applied to buttons by using the following code:
[Code]...
This code solved the overlap problem, however... now when i roll out of the button, the "roll over" state remains visible (instead of returning to its original state)
I've been using the following code for a set of buttons that activates/deactivates the buttons so there is only one active button at a time:
[Code]....
I found this code here: [URL] I've been messing with this code for a couple days now and can't seem to figure out how to add a rollover state to this code, everything I try either glitches this code out or doesn't work... So at the moment it does half of what I want (makes it where there's only one active button at a time), what I want to do is to add a Rollover effect to the code above.
I have a MC containing a picture and a button. I have a "rollover" on my MC like, if the mouse rolls over, the MC plays.. But then, as I have a rollover command over the MC, the button in the MC seems not to be working anymore.
View 3 Repliesi have a button that plays a sound when you roll over it but is there a way i can get this sound to loop until you rollout?also when i rollover it repeats x2 but if i rollover while its playing it starts another sound so its doing 2 at once is there a way to avoid this ?
this is my codes
Home.onRollOver = function() {
clickMe();
}
function clickMe() {
[code]....
p i have 4 buttons they dont go anywhere well one opens a html page.(this is an intro for a website)
so heres what it looks like
-------------------------------------------
Button Button
Button Button
-------------------------------------------
on roll over a sound(4 sounds 1-1 button) plays and if any sound is playing that stops. please check to see if my code is cool. also should the sound clip be on stage or is it fine in library i changed the linkage to export.
----so on the buttons i have---------------
on (rollOver) {
stopAllSounds();
_root.schlub01.start()
[Code]....
I have a mouseOver and mouseOut stage of a button. Each button has some text in it. When I rollover the button the button does some animation, however, as soon as I rollover the text, which is inside the button, it triggers the rollout event. The text is inside the button and is inside another movie clip with no actionscript applied to it. The text is even non-selectable. What am I doing wrong?
[AS]
for(var i:Number = 1; i<4; i++){
var tmpMC:MovieClip = getChildByName('main_link'+i) as MovieClip;
[code].....
I've got a mega tight deadline and I need to figure out how to bring a button to the front when it is rolled over. I have a scene with six buttons. When each button is rolled over the roll over state contains a movie that runs and animation that 'grows' the button to reveal other information. The problem I have is the 'depth' each of these buttons are on. The top button works fine and goes over the other buttons, but the bottom level button expands below all the other buttons. If you look at the attached screen grabs you will see what I mean. What is the actionscript 3.0 I need to use and where and how do I apply it?
View 1 Repliesi have followed the complex button tutorial today to design a websites buttons..
I wanted each button to link to a seperate frame for each seperate page of the site.
The roll out effect is all in one movieclip, with the actions on frame one (below)
//stop(); this.onEnterFrame = function(){
[Code]....
but I have had no success, it works perfectly for URL's typically!
I am using buttons inside movieclips, and changing their visual layer by using swapDepth method. But for some reason i loose my rollover button effect when I use swapDepth.
View 2 Replies