ActionScript 2.0 :: Slowly Fading Movie Clips In And Out?
Dec 5, 2006
I'm trying to attach a number of movie clips and then apply a slow fade in and out effect rather than a fast animation. The other requirement is that the animation should be continuous. Has anyone seen any _alpha fader code that can be used this way? I'm attaching an MX 2004 file that will give you an idea of what I'm looking for (except I need to slow the animation way down and get rid of any _x and _y scaling). For some reason, when I tweak the numbers to slow things down in this particular code I get a lot of artifacts in the Flash player
View 3 Replies
Similar Posts:
Feb 5, 2004
I am following the Fading grid tutorial. I have followed the steps exactly but get this error loading the movie:
A script in this movie is causing flash player to run slowly. If it continues to run, your computer may become irresponsible. Do you want to abort this script yes, no?
Ofcourse I don't want to abort it!
View 9 Replies
Jun 9, 2009
I am not an actionscripter, but slowly learning. I have been using this code to fade a movie in and out. Simple for me, and works well.
[Code]...
Basically, what I am looking for is it to fade out to 15, then fade back in to 100, then back out to 15, and so on and so on. With the code above, it works fine, however, it doesn't fade in and out slow enough. If I change the diff variable to say .3, then it STOPS after it fades out. I would like somewhere around .1 or even .05, but of course, anything below .4 just stops fading once it hits 15.
View 5 Replies
Aug 9, 2010
I was taught to make a fading "slide show" in Flash CS3 using movie clips, key frames, and alpha channels. Is there a simpler way? I have a project with over 40 "slides." I am aware of some web sites like slide.com but they seem to include ads which I don't want on a professional site. Any suggestions on how to create a slide show like this one more quickly than with tweening movie clips? (I do have CS4 now.)[URL]
View 4 Replies
Mar 30, 2012
I'm trying to play 2 external flash movies. its already running ok but i need the scene to be somewhat to gradually become transparent so that the timebased scene2 will comeout to of the screen.
Here is the script of it:
var myLoader:Loader = new Loader();
var url:URLRequest = new URLRequest("scene2.swf");
myLoader.load(url);
addChild(myLoader);
[Code]....
View 2 Replies
Dec 18, 2004
I have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 Replies
Dec 18, 2004
I have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Jun 5, 2011
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
View 2 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
Oct 7, 2011
I am having a problem with a flash movie that plays slowly on some devices. The movie uses a lot of video, and was originally written in AS2. I changed it to AS3 and now, apparently, it plays too slowly.[code]...
View 2 Replies
Nov 15, 2007
im just wondering , this always happens when i create a flash movie,, when 2 MC's runs together at runtime ,, the movie clips moves slowly .
View 1 Replies
Jan 4, 2009
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replies
Jul 14, 2003
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
View 7 Replies
Sep 17, 2004
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
View 3 Replies
May 16, 2005
I'm going some genetic algorithms in Flash, and just wondering if there is any way to get rid of that stupid pop up. You know the script is running slow one, that pops up after 15secs because it ASSUMES your in a stuffed loop.I think the amount of times I go through loops in 38000. Thats with 50 Generations and 100 Population.
View 2 Replies
May 15, 2009
(A script in this move is causing Adobe Flash Player -n- to run slowly. If it continues...) But I haven't found a posting where it is resolved. I am trying to provide my client with an upload script. What I have so far works on small files but results in the aforementioned error message on large files.
I saw a message a few days ago that talked about writing an onEnterFrame routine in a dummy movie clip that increments a counter, but there were no details about what that code might look like. I have tried several iterations of that logic to no avail. I know I am not the only one with this problem, and I do need to find a solution. I don't think that the server php settings are the problem.
[Code]...
View 5 Replies
Apr 8, 2010
My computer jsut keeps freezing, before it completely does this message appears: (I am not playing any movies - I just reinstalled my whole operating system, so its not like I doing tons of things on when this happen, if I open more than one page - things just freeze and even with one page it takes forever to get to anything. A script in this movie is causing Adobe Player 10 to run slowly, your computer maybe become unresponsive, do you want to abort the script.
View 3 Replies
Nov 16, 2010
I have the following code which will bring my Banner_mc onto the middle of my Introduction page with some effects. Now, I want this movie clip to wait for a while and then move to right until it disappear with the same effects. How can I do that?
[Code].....
View 8 Replies
Mar 28, 2007
I'm externally loading some pretty large swfs (4MB - 5MB) into my main swf using a preloader from a tutorial on this site.
[URL]
As the swfs are loading i'm getting a pop-up window saying "A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?"if i click "no" everything continues to run fine. if i click "yes" my movie freezes in the middle of loading with the progress bar stopped at whatever percentage has already loaded.After perusing the forums, it seems that an infinite loop is causing this, but I don't know enough about actionscript to track it down.
publishing as flash 6 makes it so the preloader doesn't even show up and nothing plays. I need to publish as flash player 7 or lower.what is causing this pop up window and how do i get rid of it?
[code].....
View 1 Replies
Oct 23, 2010
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Replies
Mar 15, 2011
i facing error on flash swf when i run my swf long time minimum then 8hr after some time it will raised following error now more surprise it that it's not coming every time and also not coming in all PCs (even same configuration PCs) "A script in this movie is causing Macromedia Flash Player 7 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
View 9 Replies
Aug 3, 2010
I have a basic movie, where on the main timeline i have a series of stops to pause the movie,so the user can choose to proceed by selecting a play button. When the play button is pressed it plays a video. While it is playing this video there is also a button on stage allowing the user to skip to a frame label. I also have drop down menu on the same frames the play button is on in the form of a movie clip.This drop down menu contains buttons which navigate to the main timeline, to different frame labels.
But after selecting a few buttions (using the menu in the movie clip or not) I get the error "'A script in this movie is causing Flash Player to run slowly. If it continues to run, your computer may become unresponsive.
View 7 Replies
Jan 5, 2009
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 Replies
Aug 18, 2005
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
View 2 Replies
May 8, 2003
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
View 2 Replies
Jun 22, 2010
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
View 5 Replies
Jun 1, 2009
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
View 5 Replies
Jul 19, 2006
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
Apr 7, 2009
I can't work out why - but when I try to fade out some text (by calling fadeoutSecondText), the text fades out, and then immediately fades back in. Fading in and out struggle against each other, resulting in rapidly flashing text!
[Code]...
View 7 Replies
