I have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 Replies
I have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 RepliesI'm trying to create a function that will help me fade in sounds with the help of setInterval. I'm almost there! Here is the code so far:
// Begin
melodyhalf1 = new Sound("melodyhalf1_mc");
melodyhalf1.attachSound("melodyhalf1");
melodyhalf1.start(0, 99);
[Code]....
I placed a comment in the Sound.prototype.fadeIn to test if it was being called, as well as to see if the melodyhalf1 variable (object?) was being passed.
The results are that the fadeIn function *is* being called, but the trace(this) comes back with 'undefined'.
I'm trying to attach a number of movie clips and then apply a slow fade in and out effect rather than a fast animation. The other requirement is that the animation should be continuous. Has anyone seen any _alpha fader code that can be used this way? I'm attaching an MX 2004 file that will give you an idea of what I'm looking for (except I need to slow the animation way down and get rid of any _x and _y scaling). For some reason, when I tweak the numbers to slow things down in this particular code I get a lot of artifacts in the Flash player
View 3 RepliesMy issue is that I want to set up a system whereby I can register clips to a class that will have certain properties set and then animate changes in those properties. Namely, each clip is placed at a different _y position at authoring time, then at run time be repositioned at a different _y position, only to be animated back to the original position. I want to do this so I can edit the clips in their destined places to layout their positioning.
Visually, my code works fine but, as is apparent from the "trace("muvUp "+thing);", the interval isn't being cleared. And what's worse � at around 40000 (of getTimer()), the clips start disappearing.
I've attached a file but here's the code I'm working with (as you can see with the lines I've commented out, i've tried a few different options):
//MY CLASS ON FRAME 1:
function wordsClass(){}
wordsClass.prototype = new MovieClip();
wordsClass.prototype.onLoad = function(){
[Code]....
I was taught to make a fading "slide show" in Flash CS3 using movie clips, key frames, and alpha channels. Is there a simpler way? I have a project with over 40 "slides." I am aware of some web sites like slide.com but they seem to include ads which I don't want on a professional site. Any suggestions on how to create a slide show like this one more quickly than with tweening movie clips? (I do have CS4 now.)[URL]
View 4 RepliesI'm Making a catalog on Flash CS4 ActionScript 3.0and I don't know ho to move between movie clips using buttons and action script...In Scene 1 I have 2 framesIn frame 1 y have a movie clip (MC) and inside that movie clip I have 10 framesIn frame 10 of the MC, I want to put a button that will take me to frame 2 of my original timeline (NOT frame 2 of the MC)an some one tell me how's it done?or if it can't be done that way...then ...How do I go from frame 1 to frame 2 on my original timeline in Scene 1 after the movie clip in frame one is done?
View 5 RepliesI'm trying to re-size and move a movie clip using my keys, and I can do it, but for some reason, if I set a really low value to "speed", it won't move to the right or down, but it will move to the left or up, even if very slowly.
It is as if flash has problems in advancing very low values on the positive x and y axis.
Add this code to the first frame:
stop();
var speed = 0.01;
var grow = 3.6;
[Code].....
There r two function which I compare for effectiveness, createFlake uses a symbol in the library to duplicate and createFlake2 uses programming drawing to create the same looking shape.When I run this file with createFlake calls it consumes about 70% of my CPU and when I use createFlake2 my CPU is 100% busy.I would prefer to use pure programming here so my question is: Is it a "normal" result because of Flash implementation or am I doing something in a not optimal fashion?
Code:
// copying from Library FAST
function createFlake(i) {
[code]....
Basically I have a group of overlapping movieclips acting as buttons. I need to bring the clip that is being rolled over to the front. These clips are nested in a movieclip which is being loaded via attachMovie into a holder clip on the main timeline. I've created a simple file which uses this code on the clips timeline and it works for two buttons:
clip1.onRollOver = function(){
clip1.swapDepths(getNextHighestDepth());
} clip2.onRollOver = function(){
clip2.swapDepths(getNextHighestDepth());
}
However when I drop the same code into my file which has many more buttons it does not work. I've set up a trace to display depths with very strange results. Here is the code for one of the clips.
stop();
depth=MC_one.getDepth();
trace(depth);
createEmptyMovieClip("MC_top",9999);
MC_one.onRollOver = function(){
this.swapDepths(MC_top);
depth2=MC_one.getDepth();
trace(depth2);
}
The first trace produces a depth of -16358. The second produces no trace on RollOver. If I change it to onPress it produces a trace of 9999 for when pressed.
Firstly, I want to be able to push the space bar on my keyboard during a swf, and for a movie clip to appear on the stage. This is what I have so far:
Code:
onClipEvent(enterFrame){
if(Key.isDown(Key.SPACE)){
_root.attachMovie("Explosion", "Explosion"+i, _root.getNextHighestDepth());
_root["Explosion"+i]._x = _x;
_root["Explosion"+i]._y = _y-20;
}}
but its not working....
Secondly, I want A movie clip to spawn in the middle of the stage, then randomly travel outwards to the edge of the stage, then dissapear. And this needs to happen over and over, with the same movie clip travelling to a different place each time. This is what I have so far :
Code:
onClipEvent(load){
timer = 0;
i = 0;
a = 0;
b = 0;
[Code] .....
I'm having three movie clips, which I would like to move randomly within a set box. The following script works with one movie, but not with all movies placed in an array.
var clipSpeed:Number= 1;
var speedX:Number = 0var speedY:Number = 0
var upperLeftLimit:Point = new Point(0, 0)var bottomRightLimit:Point = new
[Code]......
I have a question that's been bugging me for a LONG time now. I'm still pretty new to ActionScript, I'm trying to have a series of movie clips move from right to left along the stage, but after about 3 seconds they stop! Here's the code...
ActionScript Code:
public function thingTimer () {
nextThing = new Timer (1000 + Math.random()*5000,1);
[code]......
so basically i have 3 red cups which are movie clips and i got them to move but they move out of the screen and i want them to move at a speed and switch positions within each other.so how do i do this with coding ( actionscript 2.0 _
View 6 RepliesAfter creating a container with 5 dynamically attached clips. I want to place the move the clips to coordinate from xArray and yArray the clips are not moving. What did I goof?
Code:
//Variable to Store Number of Clips Desired
clipCount = 5;
xArray(25, 50, 75, 100, 125);
yArray(200, 250, 300, 350, 400);
newX = xArray[i-1];
// set coordinate X (destination)
[Code] .....
I'm trying to play 2 external flash movies. its already running ok but i need the scene to be somewhat to gradually become transparent so that the timebased scene2 will comeout to of the screen.
Here is the script of it:
var myLoader:Loader = new Loader();
var url:URLRequest = new URLRequest("scene2.swf");
myLoader.load(url);
addChild(myLoader);
[Code]....
I am definitely not competent with code in any significant way, and although I am confident that this code is even Action Script 2, I am not certain.A client has requested that I make a simple rolling filmstrip that loops with pictures. For this I searched the Internet for hours looking for a tutorial or a downloadable Flash file that has something close to what I want. Surprisingly, amid the dozens of purchasable applications and such I stumbled across, it seemed that none had exactly what I was wanting, which seems simple.
Anyway, I was able finally to find something useful.It allowed me to do what I wanted fairly simply.However, there are two things that I cannot figure out.The original "template" file was designed so that the filmstrip moves automatically, but when the cursor is hovered over the strip, the speed of the movement increases either way relative to how close to either horizontal edge the cursor is.
I went in and edited the code to turn that off. Now, the strip stops moving whenever the cursor is on the left side of the strip, and starts when it is on the right side. Also, the strip does not start automatically on most browsers I have viewed it on.The Action Script is posted below:
stop();
//Setup////////////////////////////////////////
//totalclips on stage - make sure in the properties panel they are named imgbox1,imgbox2,imgbox3,etc...
var totalClips = 6;
//to stop the clips from moving change to true;
var holdPosition = false;
//applies a max speed for the movie clips (false if no max speed)
var maxSpeed = .1;[code]............
I can't work out why - but when I try to fade out some text (by calling fadeoutSecondText), the text fades out, and then immediately fades back in. Fading in and out struggle against each other, resulting in rapidly flashing text!
[Code]...
This is sort of a multi-layered question- I have a movie clip that I sectioned off in quadrants:The red dot is the player, the stage is the size of one square. My goal is to, when the player moves to either of the 4 edges, the next section of the quadrant comes up (meaning if the player moves to the right edge, the section that borders the right edge will slide on screen, and the old section will slide off screen).I was wondering if there was a way to hitTest if an object is touching any part of the edges? Is the hitTestPoint method something I should look into? What I have so far is an object off screen (black rectangle), that when the player touches the quadrants slide like I want them to (at least I'm trying to make that work).Here is my code. I know some of it's wrong and/or I'm missing something.
if(leftKeyIsDown && player_mc.x > -15)
//-15 is half the size of the temporary player_mc
{
[code]......
when i test the movie all i see is a large grey box (border color) with a medium white box (box color) in the bottom right.when i edit the border and lose the grey box but leave its line borders then i get the image with the white box in the bottom right. i've got an image: instance named 'image', a box: instance named 'box' and a border: instance named 'border' and pasted in the actionscript in
View 5 Repliesi've done the Fading Grid tutorial that Voetsjoeba wrote but i seem to be de-railing somewhere when i test the movie all i see is a large grey box (border color) with a medium white box (box color) in the bottom right.when i edit the border and lose the grey box but leave its line borders then i get the image with the white box in the bottom right. i've got an image: instance named 'image', a box: instance named 'box' and a border: instance named 'border' and pasted in the actionscript in place but it still hangs.
View 5 Repliesim looking for how to remove a setInterval. i searched but the answer which was supposed to work dident for me.
[Code]...
i'm kinda new to actionscript but im trying to find out how to realise a banner i am making.I have 1 big movieclip thats about 5x larger then what is shown, i have 4 movieclips each on each side of the movieclip, left, right, up and down.The idea is that when i hover on 1 of the movieclips the big movie clip moves that way until the mouse isn't hovering above it or when the movieclip reaches the end of the side.I have given a mouse listener event to each movieclip on the side, the trace works well, but i i don't know how to make the big movieclip move when i hover the side, i hope someone can give me some pointers on how to proceed.
Code:
stop();
import flash.events.MouseEvent;
leftMove.addEventListener(MouseEvent.MOUSE_OVER,move_left);
function move_left(event_object:MouseEvent) {
[code]....
For loop generates clips containing clips. I need to access a specific clip (look_back) within the parent clip generated by the loop. Not sure how to do this.[code]
View 1 Repliesim currently making an "AS3 beat em up" ala streets of rage or double dragon.Currently i have my character moving and a few animations done and i am trying to figure out how to make attacks work.I have some "basic" animation for his attack, but im not sure how to get it to work correctley.What happens is, if you press control (the attack button) whilst the character is walking he just keeps moving and is stopped on the attack frame.I want the character to stop moving if the attack is pressed and once it is released start moving again.
hero.gotoAndStop('still');
var left:Boolean = false;
var right:Boolean = false;[code].......
what i have is a tween on a movie clip of a popcorn kernel on one layer and a tween on a button on another layer to follow the movie clip. i want to be able to roll over the kernel and make it "pop". i changed my over on the button to popped corn (this works) but i want it to stay popped for the rest of the tween.
View 11 RepliesI want to know how i can moving my scene by moving a mouse over them.
to understand what i want exactly ckeck this link :- [URL]
I have some simple script that has 2 "movie clips". What I want to do is to start moving the second movie clip at the same time when the 1st starts moving. (both start moving at the same time) I tried the following script but it never works:
[Code]...
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
