I'm trying to re-size and move a movie clip using my keys, and I can do it, but for some reason, if I set a really low value to "speed", it won't move to the right or down, but it will move to the left or up, even if very slowly.
It is as if flash has problems in advancing very low values on the positive x and y axis.
Add this code to the first frame:
stop();
var speed = 0.01;
var grow = 3.6;
[Code].....
i'm kinda new to actionscript but im trying to find out how to realise a banner i am making.I have 1 big movieclip thats about 5x larger then what is shown, i have 4 movieclips each on each side of the movieclip, left, right, up and down.The idea is that when i hover on 1 of the movieclips the big movie clip moves that way until the mouse isn't hovering above it or when the movieclip reaches the end of the side.I have given a mouse listener event to each movieclip on the side, the trace works well, but i i don't know how to make the big movieclip move when i hover the side, i hope someone can give me some pointers on how to proceed.
Code:
stop();
import flash.events.MouseEvent;
leftMove.addEventListener(MouseEvent.MOUSE_OVER,move_left);
function move_left(event_object:MouseEvent) {
[code]....
I'm Making a catalog on Flash CS4 ActionScript 3.0and I don't know ho to move between movie clips using buttons and action script...In Scene 1 I have 2 framesIn frame 1 y have a movie clip (MC) and inside that movie clip I have 10 framesIn frame 10 of the MC, I want to put a button that will take me to frame 2 of my original timeline (NOT frame 2 of the MC)an some one tell me how's it done?or if it can't be done that way...then ...How do I go from frame 1 to frame 2 on my original timeline in Scene 1 after the movie clip in frame one is done?
View 5 RepliesFirstly, I want to be able to push the space bar on my keyboard during a swf, and for a movie clip to appear on the stage. This is what I have so far:
Code:
onClipEvent(enterFrame){
if(Key.isDown(Key.SPACE)){
_root.attachMovie("Explosion", "Explosion"+i, _root.getNextHighestDepth());
_root["Explosion"+i]._x = _x;
_root["Explosion"+i]._y = _y-20;
}}
but its not working....
Secondly, I want A movie clip to spawn in the middle of the stage, then randomly travel outwards to the edge of the stage, then dissapear. And this needs to happen over and over, with the same movie clip travelling to a different place each time. This is what I have so far :
Code:
onClipEvent(load){
timer = 0;
i = 0;
a = 0;
b = 0;
[Code] .....
I have a question that's been bugging me for a LONG time now. I'm still pretty new to ActionScript, I'm trying to have a series of movie clips move from right to left along the stage, but after about 3 seconds they stop! Here's the code...
ActionScript Code:
public function thingTimer () {
nextThing = new Timer (1000 + Math.random()*5000,1);
[code]......
so basically i have 3 red cups which are movie clips and i got them to move but they move out of the screen and i want them to move at a speed and switch positions within each other.so how do i do this with coding ( actionscript 2.0 _
View 6 RepliesThis is sort of a multi-layered question- I have a movie clip that I sectioned off in quadrants:The red dot is the player, the stage is the size of one square. My goal is to, when the player moves to either of the 4 edges, the next section of the quadrant comes up (meaning if the player moves to the right edge, the section that borders the right edge will slide on screen, and the old section will slide off screen).I was wondering if there was a way to hitTest if an object is touching any part of the edges? Is the hitTestPoint method something I should look into? What I have so far is an object off screen (black rectangle), that when the player touches the quadrants slide like I want them to (at least I'm trying to make that work).Here is my code. I know some of it's wrong and/or I'm missing something.
if(leftKeyIsDown && player_mc.x > -15)
//-15 is half the size of the temporary player_mc
{
[code]......
I've set the publish settings to 100% width and 100% height and have then added the 'noScale' function into the first frame of my timeline. Here is an idea of what I'm trying to create:
I have three movieclips that are touching the left side of the Stage and want them to touch the left side of the browser but centre vertically. I can do this by adding the 'Stage.align = LC' command, but not sure if this is the right way to go about it.
The movieclip that is on top contains a logo and I want it to have a fixed size. I called the instance name 'logo_mc'.
The movieclip below 'logo_mc' is called 'container_mc' and is a strip of photographs that I need to run from the left to the right side of the browser no matter what the browser size. I need this movieclip to scale proportionally up and down as they viewer resizes their browser so the first photo is touching the left side of the browser and the last picture is touching the right side (without distorting).
The final movieclip is called 'buttons_mc' and is right below the 'container_mc' clip. This movieclip needs to remain a fixed size.
Obviously when the 'container_mc' clip resizes I need the other movieclips to move up and down to stay the same distance above and below the 'container_clip'.
Example of what I am trying to create: [URL]
I want to put together a flash gallery of photography for my photography business. I am very good at Photoshop design, html, css, javascript but I am a novice with flash. I can use it and use some actionscripting but my knowledge is limited.
I see galleries like this one: [URL]
The images expand and contract perfectly as the browser is resized. I am used to having to size pics for the lowest res screens (I design for 1024 width resos's usually).
What size should I make pictures to work like this... Does flash scale them down / up / either... are there quality issues with letting flash manage the sizing.
I have a preloader(as3) that is working great, I use FlashVars to pass it what movie it is loading, then it loads that movie, and shows it on the stage after loaded. I would like to make this a bit more dynamic. Right now I can use the same preloader for any movie so long as the movie and the preloader is the same size. I would like to pass the size of the movie im loading to the preloader with flashvars just like im passing it the file path for the movie itself. Here is how im passing the movie:
var swfLocation = this.loaderInfo.parameters.flashPath;
var myRequest:URLRequest = new URLRequest(swfLocation);
now i just access the variable wherever i want to say load the movie
I tried:
var swfHeight = this.loaderInfo.parameters.flashHeight;
var swfWidth = this.loaderInfo.parameters.flashWidth;
stage.stageHeight = swfHeight;
stage.stageWidth = swfWidth;
then in my flashvars i have a value of flashPath=<?=path?>&flashHeight=<?=height?>&flashW idth=<?=width?> (passing these to the embed and object using php btw)
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
For my menu on my page, I want to do things dynamically. For the drop down menu, I want to have a box around the link when moused over, that changes depending on the number of characters that are going to be placed on it.
[URL]
See how the "tab" around team is smaller than the menu? But GRAPHICS will be larger, and so on.
I'm parsing an XML file to pull in the data for the menu, so I want to handle this portion dynamically as well.
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
There r two function which I compare for effectiveness, createFlake uses a symbol in the library to duplicate and createFlake2 uses programming drawing to create the same looking shape.When I run this file with createFlake calls it consumes about 70% of my CPU and when I use createFlake2 my CPU is 100% busy.I would prefer to use pure programming here so my question is: Is it a "normal" result because of Flash implementation or am I doing something in a not optimal fashion?
Code:
// copying from Library FAST
function createFlake(i) {
[code]....
Basically I have a group of overlapping movieclips acting as buttons. I need to bring the clip that is being rolled over to the front. These clips are nested in a movieclip which is being loaded via attachMovie into a holder clip on the main timeline. I've created a simple file which uses this code on the clips timeline and it works for two buttons:
clip1.onRollOver = function(){
clip1.swapDepths(getNextHighestDepth());
} clip2.onRollOver = function(){
clip2.swapDepths(getNextHighestDepth());
}
However when I drop the same code into my file which has many more buttons it does not work. I've set up a trace to display depths with very strange results. Here is the code for one of the clips.
stop();
depth=MC_one.getDepth();
trace(depth);
createEmptyMovieClip("MC_top",9999);
MC_one.onRollOver = function(){
this.swapDepths(MC_top);
depth2=MC_one.getDepth();
trace(depth2);
}
The first trace produces a depth of -16358. The second produces no trace on RollOver. If I change it to onPress it produces a trace of 9999 for when pressed.
I'm having three movie clips, which I would like to move randomly within a set box. The following script works with one movie, but not with all movies placed in an array.
var clipSpeed:Number= 1;
var speedX:Number = 0var speedY:Number = 0
var upperLeftLimit:Point = new Point(0, 0)var bottomRightLimit:Point = new
[Code]......
I have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 RepliesI have three movieclips that i would like to move to a certain position and fade in during this process. I would loke that to happen with an interval of 1/2 a second between each clip. The funtion is not a problem, neither is the setInterval! But how to combine these two??
View 3 RepliesAfter creating a container with 5 dynamically attached clips. I want to place the move the clips to coordinate from xArray and yArray the clips are not moving. What did I goof?
Code:
//Variable to Store Number of Clips Desired
clipCount = 5;
xArray(25, 50, 75, 100, 125);
yArray(200, 250, 300, 350, 400);
newX = xArray[i-1];
// set coordinate X (destination)
[Code] .....
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I am definitely not competent with code in any significant way, and although I am confident that this code is even Action Script 2, I am not certain.A client has requested that I make a simple rolling filmstrip that loops with pictures. For this I searched the Internet for hours looking for a tutorial or a downloadable Flash file that has something close to what I want. Surprisingly, amid the dozens of purchasable applications and such I stumbled across, it seemed that none had exactly what I was wanting, which seems simple.
Anyway, I was able finally to find something useful.It allowed me to do what I wanted fairly simply.However, there are two things that I cannot figure out.The original "template" file was designed so that the filmstrip moves automatically, but when the cursor is hovered over the strip, the speed of the movement increases either way relative to how close to either horizontal edge the cursor is.
I went in and edited the code to turn that off. Now, the strip stops moving whenever the cursor is on the left side of the strip, and starts when it is on the right side. Also, the strip does not start automatically on most browsers I have viewed it on.The Action Script is posted below:
stop();
//Setup////////////////////////////////////////
//totalclips on stage - make sure in the properties panel they are named imgbox1,imgbox2,imgbox3,etc...
var totalClips = 6;
//to stop the clips from moving change to true;
var holdPosition = false;
//applies a max speed for the movie clips (false if no max speed)
var maxSpeed = .1;[code]............
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
