Moving Between Movie Clips And Frames Outside The MC?
Sep 24, 2009
I'm Making a catalog on Flash CS4 ActionScript 3.0and I don't know ho to move between movie clips using buttons and action script...In Scene 1 I have 2 framesIn frame 1 y have a movie clip (MC) and inside that movie clip I have 10 framesIn frame 10 of the MC, I want to put a button that will take me to frame 2 of my original timeline (NOT frame 2 of the MC)an some one tell me how's it done?or if it can't be done that way...then ...How do I go from frame 1 to frame 2 on my original timeline in Scene 1 after the movie clip in frame one is done?
View 5 Replies
Similar Posts:
Sep 15, 2010
i'm kinda new to actionscript but im trying to find out how to realise a banner i am making.I have 1 big movieclip thats about 5x larger then what is shown, i have 4 movieclips each on each side of the movieclip, left, right, up and down.The idea is that when i hover on 1 of the movieclips the big movie clip moves that way until the mouse isn't hovering above it or when the movieclip reaches the end of the side.I have given a mouse listener event to each movieclip on the side, the trace works well, but i i don't know how to make the big movieclip move when i hover the side, i hope someone can give me some pointers on how to proceed.
Code:
stop();
import flash.events.MouseEvent;
leftMove.addEventListener(MouseEvent.MOUSE_OVER,move_left);
function move_left(event_object:MouseEvent) {
[code]....
View 3 Replies
Feb 6, 2009
I'm trying to re-size and move a movie clip using my keys, and I can do it, but for some reason, if I set a really low value to "speed", it won't move to the right or down, but it will move to the left or up, even if very slowly.
It is as if flash has problems in advancing very low values on the positive x and y axis.
Add this code to the first frame:
stop();
var speed = 0.01;
var grow = 3.6;
[Code].....
View 1 Replies
Jul 25, 2010
Firstly, I want to be able to push the space bar on my keyboard during a swf, and for a movie clip to appear on the stage. This is what I have so far:
Code:
onClipEvent(enterFrame){
if(Key.isDown(Key.SPACE)){
_root.attachMovie("Explosion", "Explosion"+i, _root.getNextHighestDepth());
_root["Explosion"+i]._x = _x;
_root["Explosion"+i]._y = _y-20;
}}
but its not working....
Secondly, I want A movie clip to spawn in the middle of the stage, then randomly travel outwards to the edge of the stage, then dissapear. And this needs to happen over and over, with the same movie clip travelling to a different place each time. This is what I have so far :
Code:
onClipEvent(load){
timer = 0;
i = 0;
a = 0;
b = 0;
[Code] .....
View 4 Replies
Dec 17, 2009
I have a question that's been bugging me for a LONG time now. I'm still pretty new to ActionScript, I'm trying to have a series of movie clips move from right to left along the stage, but after about 3 seconds they stop! Here's the code...
ActionScript Code:
public function thingTimer () {
nextThing = new Timer (1000 + Math.random()*5000,1);
[code]......
View 2 Replies
Jan 20, 2011
so basically i have 3 red cups which are movie clips and i got them to move but they move out of the screen and i want them to move at a speed and switch positions within each other.so how do i do this with coding ( actionscript 2.0 _
View 6 Replies
Jun 27, 2009
how can you set it so that you can click a button, and it will make a movie clip goto a different frame- on a different frame?
View 1 Replies
Jul 9, 2009
How do I make a button on one frame (on the main timeline) tell a movie clip on another frame to go to a certain frame inside that movie clip?
To do this, if the mc's are on the same frame is easy because you just use the dot syntax or MovieClip(parent), but how would I do this if a mc is on a different frame?
View 2 Replies
May 22, 2010
I need to make some animation working without changing its structure, but I have no idea how to control mc instances on diffrent frames and diffrent movie clips. Below is example.When button is clicked, mc2 starts to play.
View 2 Replies
Nov 17, 2010
I have an action in a frame that controls multiple movie clips. It doesn't seem to work on clips that don't exist in the first frame. Is that a normal part of AS2.0?
View 1 Replies
Apr 20, 2004
I have a movie with various movie clips on certain frames.What I want is the playhead to randomly jump to different frames I specify within the movie after each Movie clip has played. So at the end of each movie clip there would be a random script forcing the playhead to play another movie clip randomly. My movie has 100 frames but I only want the random sequence to occur on the following frames 10, 13, 25, 86, 75, 56.Or If I labelled the frames how would I label them?? Would they all have to have the same label, or each label different?
View 2 Replies
Sep 6, 2009
Is it possible to create movie clips dynamically and add frames to them? Because say I have a game and there are NPCs, I'm not going to want to create say 50 different MovieClips manually, is there a way to do this through code?
View 5 Replies
Apr 9, 2010
I have a button which when pressed I need it to play a frame on the main timeline which contains a movie clip. I also want the same button to play another frame with another movie clip after the previous frame has finished playing. I have attached a sample file of what I am looking to d
View 18 Replies
Feb 9, 2010
I have seen flash sites that wait to load different parts of the flash file until you click on a link, thereby starting a loading graphic that then loads the content you're looking for. I can't find any information on how to do this, and I'm guessing I just can't find the right terminology.
View 11 Replies
Feb 19, 2008
I want to dynamically attach movie to the stage. This is fine. I'm able to do it. but i want to check if the dynamic movie clipe has executed all its frames (reached last frame). as soon as this happens i want to attach a diff movie clip. Is this possible? if i use the _currentframe property, it gives always 1 as the frame. it doesnt get to last frame of the dynamic movie clip.
View 2 Replies
Aug 4, 2008
I generally don't mess with the timeline, but I need to for this project. In a nutshell: user can customize a product reference sheet with her choice of crossection, footprint, etc. All those choices exist as external swfs. In order to be legible, the reference sheet must be two pages.I know how to print multiple frames with Flash. But what I cannot yet achieve is loading external swfs into movieclips on different frames, and then print that. Here's my code from a test fla:[code]Now, this code will print both frames as separate pages, but the loaded image in printArea.holder2 does not print!
View 3 Replies
Dec 7, 2010
This is sort of a multi-layered question- I have a movie clip that I sectioned off in quadrants:The red dot is the player, the stage is the size of one square. My goal is to, when the player moves to either of the 4 edges, the next section of the quadrant comes up (meaning if the player moves to the right edge, the section that borders the right edge will slide on screen, and the old section will slide off screen).I was wondering if there was a way to hitTest if an object is touching any part of the edges? Is the hitTestPoint method something I should look into? What I have so far is an object off screen (black rectangle), that when the player touches the quadrants slide like I want them to (at least I'm trying to make that work).Here is my code. I know some of it's wrong and/or I'm missing something.
if(leftKeyIsDown && player_mc.x > -15)
//-15 is half the size of the temporary player_mc
{
[code]......
View 18 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Jun 5, 2011
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
View 2 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
Jun 12, 2010
I'm new to Flash and just started working on an animated short. In one of the sequences, I realized too late that an object was too far left in the frame and needed to be moved back. Is there a way to do that in all of the keyframes at once rather than doing it one at a time? The thing that needs to be moved is a .png file, not a symbol.
View 1 Replies
Jul 22, 2009
Anyone want to tell me why this MC allways goes to frame 76 once clicked insted of checking the frame its on here is the code... function goQuestion(e:Event){ if(e.currentTarget.frame <=(60)){ e.currentTarget.gotoAndPlay(60)}else{ e.currentTarget.gotoAndPlay(76);}}
View 8 Replies
Sep 12, 2009
I'm putting together book in Flash. The audio starts with frame 2 but the naritive continues on frame 3 and 4. I can code a "next" button like so:
Code:
on (release) {
gotoAndStop(3);
[code].....
View 1 Replies
Jan 4, 2009
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replies
Jul 14, 2003
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
View 7 Replies
Sep 17, 2004
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
View 3 Replies
Nov 24, 2011
basically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 Replies
Oct 8, 2010
I'm trying to go back a certain number of frames (let's say 20) after I hit the "Left" keyboard key.
PHP Code:
import flash.events.KeyboardEvent;
import flash.ui.Keyboard;
[code].....
View 6 Replies
Apr 12, 2011
I am trying to step from AS2 to AS3, not that easy.. I got to this point with a simple 3 frames movieclip. Frame 1 gives the option of loading 2 different external swf, frame 2 load directly a 3rd external swf, frame 3 nuttin happen. All works ok except when from frame2 i will go back to frame1, one of the 2 button (to load ext swf) disappear. The code i wrote down is prolly not the best.[code]...
View 0 Replies
Jun 21, 2011
I have a Flash Movie that is using Actionscript 3.0 and I have a part of it, where the user has three choices of where to go. Once they go to one, it takes them to a certain frame, then returns to the choice frame. There are three choices here, and what I want to happen is have a button appear to move them past this section, only after they have viewed all three choices.
View 9 Replies
