Professional :: Make Movie Clip Move Slowly Towards Right After A Few Seconds?
Nov 16, 2010
I have the following code which will bring my Banner_mc onto the middle of my Introduction page with some effects. Now, I want this movie clip to wait for a while and then move to right until it disappear with the same effects. How can I do that?
[Code].....
View 8 Replies
Similar Posts:
Oct 23, 2010
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Replies
Mar 25, 2012
the conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.
View 2 Replies
Jun 12, 2010
The menu works as follows: My stage is 960px wide. On the stage there is a holding MC called container_mc which is 1900px wide. Within this holding MC there are 6 buttons which fill up the entire dimensions of the MC. This container_mc sits on the stage and the sure can click and drag this container about horizontally thus revealing all of the buttons. When they click it opens up a box. When the box is closed the menu comes back. All of this works perfectly.
I am now trying to integrate a movieclip, lets call it markermc that sits underneath the container_mc on the stage. Now, as the menu is dragged i want this markermc to move relative to the container_mc. So if the container_mc is being dragged left, at the same time i want the markermc to move right or if the container_mc is being dragged right then the markermc needs to move left. The reason i want this is because it will give a visual clue as to where you are on the menu. A working example of this can be seen at [url]...
The container_mc's starting X position is 20px on the stage. This is the same starting position for the markermc. The container_mc can be dragged as far as -960px for its X position. When the container_mc is at this point, then the marker MC needs to be at 960px. Basically i am trying to get the markermc to move inversely to the container_mc.[code]...
View 1 Replies
Jun 30, 2009
I have a movie clip called Lion Beginning_mc, inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.
For example:
Key Frame number 01 - Dog
Key Frame number 02 - Cat
Key Frame number 03 - Mouse
I want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 1 Replies
May 28, 2004
im been trying to make a stationary movie clip do a jump move to the top, slowing down, and then comming back down (like a ball being thrown vertically up) within a given number of frames, ie 10 frames.
Also i would want to add a horizontal vector quantity whereby if a key is pressed (ie left) then it would move horizontally left while still in jump mode.
Does an actionscript like this exist?
View 2 Replies
Jun 25, 2005
How can I make a Movie Clip move dynamically following a path given by a line?? Like.... the user can draw a line and the movlieclip moves following it ? how ?
View 1 Replies
Aug 29, 2003
i have 2 movieclips: i want to move both of them but the second movie clip will only move if the first clip reach his final destination how do i do that?
View 2 Replies
Mar 22, 2011
I'm making a room escape game and I've run into a problem. When an item gets added to the inventory, I'd like the user to be able to click on the item to affect another object (e.g. clicking screwdriver hides screws and displays other image) however when I add the code to the item, if the item is clicked and it's nowhere near the object it affects, the image pops up and it looks really stupid.
So what I'd like to be able to do, possibly using if and else statements or whatever's easiest, is to only have the inventory item be clickable if the movie clip of the object is affects is visible on the stage.
View 6 Replies
Nov 15, 2007
im just wondering , this always happens when i create a flash movie,, when 2 MC's runs together at runtime ,, the movie clips moves slowly .
View 1 Replies
Oct 29, 2008
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 Replies
Feb 21, 2011
I'm trying to make about a minute long animation of two koi fish.
1. Fish slowly swim in frame
2. Fish swim in circle a couple times
3. 4 food pellets drop into water
4. Fish eat them one at a time
5. Fish slowly swim out of frame
I've finished step 2, but now I want to go back and do step 1. I've attatched a picture of my koi and I was wondering if there was any way I could flip the image of them and tween them to make it look like the fish were moving their bodies all in flash.
View 2 Replies
Apr 8, 2010
My computer jsut keeps freezing, before it completely does this message appears: (I am not playing any movies - I just reinstalled my whole operating system, so its not like I doing tons of things on when this happen, if I open more than one page - things just freeze and even with one page it takes forever to get to anything. A script in this movie is causing Adobe Player 10 to run slowly, your computer maybe become unresponsive, do you want to abort the script.
View 3 Replies
Dec 7, 2010
Ok I want to make spawn able enemies and when they get in like 5 pixles in range they start to follow the player they are moving and if they switch directions it will go to another frame that will make it look like they are running in that direction. How can this be acheived?
View 1 Replies
Jun 30, 2009
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 Replies
Aug 15, 2011
I saved as swf & got this error msg in the compiler errors: Symbol=but1,layer 4, frame=1 Mouse events are only for button instancesIn the library I checked the properties of the button and its a movies clip, I'm not sure if it will make any difference if I change to button or graphic?I would like to upload the fla and swf files but this forum doesn't seem to allow me to attach files to messages.
View 3 Replies
Nov 2, 2003
I wouild like to Play a movie clip in a movie like once every 120 seconds. Are there actionscripts whichs does this? Using Flash MX....
View 3 Replies
Jun 18, 2010
I have 10 objects in 10 layers to make a single logo. I have created them using flash drawing objects. Now I would like each object to come one by one on stage using motion tween. How can I go further? Do I need to make each object a movie clip before set it motion tween? Or do I need to make a single movie with all 10 objects as combined? Please note that I need each object to come on stage one by one (not a whole logo on once). Please provide help or any example tutorial link.
View 3 Replies
Nov 3, 2010
Using Flash CS3 and as2.
I'm trying to get my movie clip to appear after 1 second then disappear after five seconds.
In it's class action script file I have this code which should remove the clip 5 seconds after it loads:
class monktainer extends MovieClip
{
function destroy()
{
[Code].....
View 2 Replies
Nov 27, 2009
I have two buttons one button is calling in a movie clip with tween and then a second button that is also calling in a movie clip into the same spot. I want to make it so that when ever you are calling a movie clip in is that it moves the other movie clip away or that it lands on top of the old one. Here is the code.
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[Code]....
the problem is that it the second movie clip is always on top even though thay are on the same layer.
View 4 Replies
Dec 31, 2009
I've got an infographic I'm working on, and every time I roll over an image (a ring) the alpha goes up to 100, then I roll out and it goes back to 50. That much I'm good with.
Then, I click on each one of them, and a movie clip (built inside of each ring/button) pops up and plays. Fair enough.
I've got a script (ugly, but it works!) that will hide all other buttons while this movie clip is playing. But, when I click to close it, I can't figure out a way to make them reappear. I tried putting visible = true again for all of them, but no dice.
The actionscript for it is right below.
I'm not sure if there's anything I can do to make it modal in AS3 or something like that. Or should I go ahead and set it up in a parent/child kind of way (not too well-versed in that regard.
All the buttons to click on are in the same layer and I'm not sure if making them different layers in Flash would make any difference.
stop();
ring1926.movie1926.visible = false;
// add a rollover to make the inside movieclip appear
[Code].....
View 4 Replies
Oct 20, 2010
I have a .swf that loads into a movie clip in a Flash website. The .swf has all necessary stops to play once and stop once loaded. When tested outside of the movie clip, it does what it should, but once loaded, it loops forever and the speed is faster. How do I make this stop looping? (This only happenes to .swf that were made in CS4, doesn't happen with older .swfs that were made in Macromedia)
View 10 Replies
Mar 31, 2011
How do i make a movie clip go back to the main stage once it is clicked.. it has a roll in and out which is inside the movie clip.. i have a door and i want it so when you click the door it goes to another key frame on the main stage
View 1 Replies
Dec 8, 2007
How can i remove a movie clip after 10 seconds when it was called
View 1 Replies
Jul 26, 2010
I got a flash movie clip (Walking_Man.swf) which has a "Man" character who walks but on same place. It means he doesn't move a bit on stage. Now, I would like to give a realistic look by moving him from left to right. How can I do it?
I would like to write an Actionscript 3 code for this purpose.
View 6 Replies
Nov 22, 2004
how I can create a working scrollbar for a movie clip? I've managed to get as far as inserting two buttons that allow you to move the movie clip up and down, it's just getting the scrollbar to be able to move the clip within a certain ratio that I'm finding hard to do.
View 4 Replies
Dec 7, 2004
I use FlashMX and made a basic flash movie with one movie clip. (movie clip contains frame by frame animation using images rendered at AE) How can I make the movie clip stop after a specified number of seconds? Client wants to be able to change the seconds when needed. So a text file along with swf file including number of seconds...?
View 2 Replies
Dec 7, 2004
I use FlashMX and made a basic flash movie with one movie clip. (movie clip contains frame by frame animation using images rendered at AE) How can I make the movie clip stop after a specified number of seconds? Client wants to be able to change the seconds when needed. So a text file along with swf file including number of seconds...?
View 2 Replies
Dec 10, 2007
I have a movie clip symbol that is place on my main time line.I want the movie clip to display frames for (x) seconds then go to the next frame.I have a chunk of code that works by itself but when placed into my flash site it is causing some strange problems. Such as navigating to a label (page) prior to the movie clip that has the wait function code, freezes the flash.I am wondering if I need _root or a this in there somewhere.
The reason I want to do this is so I don't have to add a bunch of frames to get the pause time I need.Is there a way to use the code below and not have it cause problems with the rest of my time line?Here is the wait function code
stop();
i = 1;
function Wait() {[code].....
View 7 Replies
Jul 4, 2010
I have an animation Logo flash movie which I want to appear after 10 seconds of loading the background image (Panel_mc)?
I am using Actionscript 3 to load the Logo.swf movie. The following is the whole code that I have on my action script page:
stop();import fl.transitions.Tween;import fl.transitions.easing.*;
var PanelTween:Tween = new Tween(Panel_mc, "y", Elastic.easeOut, -400, 20, 5, true);
var l:Loader=new Loader();addChild(l);l.load(new URLRequest("Logo.swf"));l.x = -20;l.y = -20;
l.contentLoaderInfo.addEventListener(Event.INIT, growLoader);
function growLoader(evt:Event):void { l.width = 320; l.height = 185;}
Note: I need it because first the background will animate so no one can pay attention to my Logo. Once the background stops animation, My logo needs to be start (animation)?
View 3 Replies