im been trying to make a stationary movie clip do a jump move to the top, slowing down, and then comming back down (like a ball being thrown vertically up) within a given number of frames, ie 10 frames.
Also i would want to add a horizontal vector quantity whereby if a key is pressed (ie left) then it would move horizontally left while still in jump mode.
Does an actionscript like this exist?
I just have a button and a movie clip (MenuUp) and i want the button to be able to make the movie clip jump to different frames...
[Code]...
The menu works as follows: My stage is 960px wide. On the stage there is a holding MC called container_mc which is 1900px wide. Within this holding MC there are 6 buttons which fill up the entire dimensions of the MC. This container_mc sits on the stage and the sure can click and drag this container about horizontally thus revealing all of the buttons. When they click it opens up a box. When the box is closed the menu comes back. All of this works perfectly.
I am now trying to integrate a movieclip, lets call it markermc that sits underneath the container_mc on the stage. Now, as the menu is dragged i want this markermc to move relative to the container_mc. So if the container_mc is being dragged left, at the same time i want the markermc to move right or if the container_mc is being dragged right then the markermc needs to move left. The reason i want this is because it will give a visual clue as to where you are on the menu. A working example of this can be seen at [url]...
The container_mc's starting X position is 20px on the stage. This is the same starting position for the markermc. The container_mc can be dragged as far as -960px for its X position. When the container_mc is at this point, then the marker MC needs to be at 960px. Basically i am trying to get the markermc to move inversely to the container_mc.[code]...
I have a movie clip called Lion Beginning_mc, inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.
For example:
Key Frame number 01 - Dog
Key Frame number 02 - Cat
Key Frame number 03 - Mouse
I want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
I have the following code which will bring my Banner_mc onto the middle of my Introduction page with some effects. Now, I want this movie clip to wait for a while and then move to right until it disappear with the same effects. How can I do that?
[Code].....
the conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.
View 2 RepliesHow can I make a Movie Clip move dynamically following a path given by a line?? Like.... the user can draw a line and the movlieclip moves following it ? how ?
View 1 Repliesi have 2 movieclips: i want to move both of them but the second movie clip will only move if the first clip reach his final destination how do i do that?
View 2 RepliesI want to Jump a Movie Clip When I pressed a Control Key. What will be the code.
View 3 RepliesI used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 Repliesit seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Repliesbasically i have a container which I am loading in swfs, when you click on a specific button I want the loaded swf to jump to a specific frame.
I am using actionscript 2 at the moment this is the code on my buttons...
on (release) {
container.loadMovie("lindy_black_swatch.swf");
}
how to jump to a certain frame number / frame label inside a movie clip on the main time line (ROOT) from ANOTHER movie clip elsewhere. Any ideas?
View 1 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI need a AS to make a movie jump to a random Fram
View 3 RepliesI have two buttons one button is calling in a movie clip with tween and then a second button that is also calling in a movie clip into the same spot. I want to make it so that when ever you are calling a movie clip in is that it moves the other movie clip away or that it lands on top of the old one. Here is the code.
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[Code]....
the problem is that it the second movie clip is always on top even though thay are on the same layer.
how I can create a working scrollbar for a movie clip? I've managed to get as far as inserting two buttons that allow you to move the movie clip up and down, it's just getting the scrollbar to be able to move the clip within a certain ratio that I'm finding hard to do.
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
I have this code written for a game im making, but the problem is that the function 'jump' is only run when the mouse is clicked over the movie clip "grape1"
Code:
var MyArray = new Array
this.addEventListener(Event.ENTER_FRAME, keepRunning);
this.addEventListener(MouseEvent.CLICK, jump);[code]...
This is my first tread, but Im a long time viewer of this site.I ve got a question. Im trying to figure out how to move a clip from one location to another using a button. This is the code on my movie clip.
onClipEvent (load) {
_root.targX=100;;
}
[code].....
I'm making a room escape game and I've run into a problem. When an item gets added to the inventory, I'd like the user to be able to click on the item to affect another object (e.g. clicking screwdriver hides screws and displays other image) however when I add the code to the item, if the item is clicked and it's nowhere near the object it affects, the image pops up and it looks really stupid.
So what I'd like to be able to do, possibly using if and else statements or whatever's easiest, is to only have the inventory item be clickable if the movie clip of the object is affects is visible on the stage.
make a circle object movie clip call ball and make a rectangle object movie clip call mc and paste this coding.
[Code]...
can anyone explain about the movement about D? the D is talk about the distance if i go -X,way my ball go ++ to +x?
suppose one has two buttons "left" and a "right ".the 'left' moves to the leftand the "right" to the rightand the goal is to move the object "ball"based on this potential requires that script to do this?
View 1 RepliesI'm looking for some actionscript that will move a clip from one point to another, but in a curve. I've done one that tweens the x and y positions as well as the scaleX and scaleY that sort of does this.
Seems I've seen this sort of thing on YouTube at the end of watching a video. A set of small videos appear, they scale up in size and move to a new position, but they go up, and then down smoothly (thus, a 'curve');
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesHow do I move a movie clip to top? I have 4 clips on stage and they alpha in and out. When one is at alpha 100% I want it to be above all the other is this possible?
View 5 Repliesfrom one flash .fla file to another .fla file? I would need all the different layers too. I tried to export it but it does not work.
View 2 RepliesI have this code on my instance named "orangecell", i would like this mc to be shown on (350, 250) is it possible?[code]...
View 0 RepliesA) When I hit the UP key to jump the character continues to move up as I hold the key down.
B) When I stop moving forward the frame of the stickman symbol for walking keeps playing and I want it so the frame labeled "idle" will play when I release right or left.
C) Is it possible to have an action for holding 2 keys at once? I want to have it so i can hold SPACE and RIGHT/LEFT to run.
[Code]...
I have loaded an external swf into the movie clip 'image1' on the stage. Once the swf has loaded into 'image1', is there any way I can seamlessly move the content from 'image1' to movie clip 'image2' (on a different layer and position on stage.
View 1 Replies
