Currently I've got 2 of the same movie clip. both containing an flvplayback component. One of them has a heavy blur effect, one of them doesn't. The blurred one is the 'reflection' of the other one, but the problem is they don't load at exactly the same time alot of the time. Is there any simple code that will make one wait for the other to load? You can see it here... [URL].
View 2 Repliesvar LevelCode:Array = [10,20,30,40,50,60,70,80,...,990,1000];
var Piece0:Timer = new Timer(50, LevelCode[0]);
var Piece1:Timer = new Timer(50, LevelCode[1]);
...
var Piece98:Timer = new Timer(50, LevelCode[98]);
var Piece99:Timer = new Timer(50, LevelCode[99]);
I want to start Piece0 timer, Piece1 timer, etc., at the same time. I tried Piece0+Piece1.start();, but it did not work.
I'm trying to figure out how to start a flash animation at 7PM PST every Tuesday PST this animation would signify a 'live chat.' I can't figure how to make it PST specific, or how to do automate it every Tuesday, and I'm not sure if it's possible with just AS2.0 and no php involvement. I looked up the "get.Timeshift" function in the help.
View 3 RepliesI want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.So how to set a specific time to start the falling snow?
View 1 RepliesI need a Flash player which can start my mp3 file from a specific time based on the embedding properties or on URL or just anything.
View 2 RepliesI am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page. When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back. It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
View 7 RepliesI wanna download a movie clip from the Web and play it, and at the same time, save the clip onto the local disk. So next time I play the clip, no more downloading.my environment is Flash CS4 and AIR.I looked up three classes: NetConnection, NetStream, VideoPlayer.
View 1 Repliescurrently iv got 2 of the same movie clip. both containing an flvplayback component.One of them has a heavy blur effect, one of them doesnt.The blurred one is the 'reflection' of the other one, but the problem is they don't load at exactly the same time alot of the time. Is there any simple code that will make one wait for the other to load?
View 2 RepliesHow to play mp4 videos in e.g. flowplayer in real-time (streaming) - without downloading it fully first?
View 2 RepliesI have three FLV videos playing on my main time line.they are each set to auto play and the are each on individual frames.lets say frame 30-31 and 32.how do I have the video stop playing once it detects that the user clicked out of that frame?my problem is the video or I guess it's just the audio keep on playing even though I am already viewing some other page.
View 2 RepliesI have a problem with videos stuttering when viewing my website for the first time. My site hosts many videos so I cannot preload them all at once. I am thinking I need a code that assures that each video buffers for a few seconds as it plays.Here is the code I use to upload the video:
var vid:Video = new Video();
var nc:NetConnection = new NetConnection();
nc.connect(null);
[code].....
My swf is playing one video in using NetConnection, NetStream and Video object. If I want to stream one more video simultaneously in the same swf I have a few problems. It works when I create more NetConnection, NetStream and Video objects but is that necessary? The code rapidly becomes complex to handle.
Is there an easier way like perhaps share the NetConnection, or something (same FMS server)?
Question 2
The two videos on the stage are suppose to have different size, placement etc. Still the last one created inherit the properties of the first video display. It also starts playing for an annoying couple of seconds before the first one. How can I avoid that (inherit and delay)?
var ns1:NetStream;
var ns2:NetStream;
var nc1:NetConnection = new NetConnection();
[Code].....
Has anyone seen a Flash video player out there that will load and play two videos at the same time, such as for comparing videos? A potential client is looking for something along the lines of this. I've not been able to locate anything out there,and I'm wondering if there's a usability reason for this...Obviously, you wouldn't want the audio playing for both at the same time, and the bandwidth issue for something like this might be a concern too. My feeling is that you wouldn't want to restrict a user to just playing both videos at once, but give them the option to play them separately or at the same time, with controls for each audio and playback.
View 1 Repliesi use loadmovie() to load youtube videos inside my flash website but when i load another video the old one doesn't stop, so i tried unloadmovie to destroy it but it seems that i did a mistake in my code
This is how the code looks to stop the old one an load the new:
vloader.unloadMovie();
vloader.loadMovie("http://www.youtube.com/v/Alw5hs0chj0&hl=fr&fs=1hJ-mPcGtC");
How to do that? use other objects or classes, i only want to edit that code.
Note: I have an empty MOVIE CLIP called "vloader" where i load the video player.
Is there a way to create videos in a playlist that i can limit the views to 10 videos per user?
View 1 RepliesIs there any way to make a movie clip start at a frame other than 1? I know with graphics it's simple, but with MCs I'm not sure. If possible, I'd like to do it without code, but if that's the only way to do it, I'd like to know that way too.
View 1 RepliesI'm creating a small car game where you shoot from the car, so I've made a bullet animation with this code inside the mocieclip:
Actionscript Code:
shellNo = 0;function shellEject(){shell_holder.attachMovie("shellAnim", shellNo, shellNo);shellNo++;}
But the problem is that the car is moving when you controll it so the bullet stays on the same position and I want it to follow the car and start from the same position as the car whereever it goes.
I can't seem to get around my video and audio files starting when I arrive at the page. I'm even using some example code with start and stop buttons. This is in CS4 Flash. I expect it's because the ActionScript is in the wrong place because when I run the movie it flashes through all of the pages on the site without stopping at the home page. Is there some generic code that will allow me to simply swap out the name of the video or audio file I want to start. If there is, do I need to locate it on its own layer at the top of the timeline?
View 6 RepliesI just started to make flash animations using Adobe Flash CS4, but there's something I just don't understand. To create an animated object, I know I have to create a new movie clip symbol, animate it, and then put it in the main scene. But when I drag the symbol from the library to the main scene, only the first frame of the animation is copied! How can I copy the entire animation of a movie clip symbol to the main scene?
View 5 RepliesI'm creating a small car game where you shoot from the car, so I've made a bullet animation with this code inside the mocieclip:
shellNo = 0;
function shellEject(){
shell_holder.attachMovie("shellAnim", shellNo, shellNo);
shellNo++;
}
But the problem is that the car is moving when you controll it so the bullet stays on the same position and I want it to follow the car and start from the side of it whereever it goes.
We have a set of FMS's deployed on Amazon's EC2. One of the things we want to be able to do is automatically detect when we should start up another FMS instance. To do that, I've been looking for metrics I could measure on the local FMS box to help me identify "transition" points, e.g., when we should add capacity or remove excess capacity.
I ran some load testing to find out where the capacity limits of a particular box, but ran into a couple of problems[code]...
i have a text area that can be swiped using a touchevent....
var myText:TextField = new TextField();
myText.width = 300;
myText.x = 0;
[code].....
Figuring out Public, Private, Internal, Protected for every variable in even a basic banner is a lot for me to figure out. Defining permissions of movieclips is totally new to me. Personally, I could truly care-a-less as I don't build apps. I work in smaller media. But I need to do things right for stuff to work fast when clients want changes every 5 minutes.What's good to use starting out so I don't trip all over myself with errors?Is there a general rule of thumb for a least path of resistance? I'm thinking I should just make everything public (or what I used to know as global) unless something "bad" happens.
View 2 Repliesi've got a timer that at the moment starts at zero and goes on forever. It is also visable on stage. What I want to know is how can I get it so the timer starts at 2:00 and continues down to zero?
View 5 Replies[URL]
You don't have to understand anything the problem is into the intro. It is quite simple but I don't really know how to fix it. The problem is the movie in the first page start before it totally loaded so depending of your connection and your cpu in doesn't start at the begin.
I want to fix that.
Here's my structure.
I have a swf which load the "template" which load another swf which load the movie
index.swf (preloader)--->base.swf--->preloader2.swf---->movie.swf
I think that the only thing you need is the code of the preloader
Code:
//code for the preloader and loader element
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
[Code]....
I'm creating a small car game where you shoot from the car, so I've made a bullet animation with this code inside the mocieclip:
[Code]...
But the problem is that the car is moving when you controll it so the bullet stays on the same position and I want it to follow the car and start from the same position as the car whereever it goes.
I've begun playing with Flash and XML Socket Servers and I thought I started taking to it easy, but now I'm running into some problems and I'm a bit confused! I was able to connect and disconnect to a socket server I wrote and Unity but I seem to be having problems sending and/or recieveing data.I wrote a small amount of code to try it out:
var server:XMLSocket = new XMLSocket();
server.connect("66.194.238.241",10000);
server.onConnect = function(success:Boolean) {[code].....
It seems to be connecting fine but when I click and I try my send.
I have done an animation which includes a button that I want to use to start it. I've added action script to stop the animation on the last frame, I just have no idea what action script to put in to start it when the button is pressed. I have 14 layers + an action script layer. 7 of the layers are animated.
View 3 RepliesIn the transitional stage to AS3, I have 2 MovieClips onstage both with a short animation in them. MovieClip2 has the stop(); on its first frame. When movieClip1 gets to the end of its timeline I want it to start movieClip2 playing.
parent.movieClip2.gotoAndPlay(2); doesn't work.
Do I need evenetlisteners or something?
I have a simple Flash movie with a series of still pics fading from one to the next.I want to use it in a web page masthead and I would like the movie to start on a random frame.Is there some simple AS3 code I could use in the first frame that directs the movie to immediately jump to a random starting point within the 220 frames contained in the movie?
View 6 Replies