Do anyone know of a way, or a site that mentions how to make a quiz in flash, or time activation in flash. .For instance if the xml says that something starts at 6 o clock and ends 12 o clock. and then something else starts after that. How do you do something like that in flash?
View 5 RepliesI'm trying to create a simple quiz with a few questions, the code I have below doesn't seem to work. It comes up with my final score as -15 all the time, its not even checking to see if the answer is correct, as soon as I load the movie the Output comes out as -5 -10 -15.
quizBut.onRelease = function() {
totalOutput_txt.text = "Your final score is: "+score+"/30.";
};
score = 0;
if (_root.answer1 == "flush") {
[Code] .....
Anyone know where to start thinking about logic for an XML quiz with multiple correct answers, that when the user gets the question right, that question is removed from the random array of questions so we never need to answer it again?
View 0 RepliesI have a flash nav in my xhtml, and I use the object code in FF and it works great. When I load in IE I am forced to click to activiate the nav - how to I fix this?I thought there used to be a .js file that was published that you could use with the .swf to get past this click to activate crap, but when I publish out of CS4 I don't get any .js anymore.
View 1 RepliesThe following code dynamically creates a movieclip "button". I also create a mask and a UILoader inside the original button to house an image. Works great. Unfortunately, the UILoader hinders the operation the the "button" mouseEventListener. How can I avoid thisHere's the code
var button:MovieClip = new MovieClip();
button.graphics.beginFill(rssXMLSettings.backgroundcolor); button.graphics.drawRoundRect(0, 0,100,100,25,25); button.graphics.endFill(); button.filters = [glow];button.y = 460;button.x
[code].....
I'm using Flash CS4 and have wasted--over the course of the past 18 months--at least three days of work time trying, in vain, to make Flash fonts work completely consistently. Problems:1) Fonts don't appear after FontAgent activation (must copy to Adobe/Fonts folder), 2) Bits of styled type totally disappear on compile (haven't figured this one out and try to avoid certain faces), 3) and most recently, totally bizarre font display (looks like egg thrown against the wall), which, despite verifying the fonts, replacing them (even though they checked out fine), cleaning the font caches (with Font Finagler, nee Font Cache Cleaner), doing a million restarts and praying, are still screwed up.
One possible common thread is that these seems to be OpenType fonts. But the errors are totally inconsistent -- for example, the font with #3 above had worked fine for nearly a year before becoming hopelessly destroyed in the past five hours, and only *some* characters in #2 disappear.I'm posting here mostly out of frustration, since previous posts on similar issues haven't yielded decent (working) solutions and Googling these problems (ad nauseam) mostly shows people using either different font managers (or none at all) or working with dynamic text. (Mine is static text.)But perhaps someone has a definitive resource/recipe for troubleshooting and solving these font problems?Or perhaps someone could shed some light on why Adobe uses separate font folders and caches?
does anyone know how to remove that 'box' that appears everytime.I enter my online flash content. It simply gets on my nervs to click it once for activation and then start using my flash!
View 1 RepliesI have inherited some code which is a matrix of buttons which give a score of 1-7 depending on which button is pressed. The matrix consist of 6 rows and 7 buttons and once all rows have a button pressed the final score is calculated and a submit button becomes activated (it is de-active until all rows have a score). This works fine, but I have added a function in which you can press a button which de-activates one row and activated another, so there are now 8 rows instead of 7, even though I want the total score to still calculate when there are 7 scores to tally up the total. The code I have now works with the first 7 scores, but when you add the 8th row it won't tally up the score, and activate the submit button. I am attaching the code I currently have to do this.
View 1 RepliesDoes anyone know of voice activation software that can be substituted for a click event, and compatible with Flash? something like...
[Code]...
I need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 3 RepliesI have to do a quiz, which will be a random 5 questions from among the 20 I have no idea how to go about doing this, please help.
View 2 Repliesi made a quiz in flash using actionscript:
At the end I have to sum the answers and show the result to the user but I can't get it.
Here is the code (I'm kind of new to actionscript, sorry if the code it's too long):
Code:
var p1=0;
var p2=0;
var p3=0;
[Code].....
I am writing a module and I have a section in this flash file where a quiz comes up and if you don't click on the right answer it tells you to try again. If you click on the right answer it will load the next swf file. But I can't get this last part to work. The quiz is within an xml file.
var current:Number = 0;
var qbox:Sprite = new Sprite;
var quiz:XML;[code]....
So where it says "if(correct) {" on the bottom, I want the file this file to go to the next swf file not say "Correct!".
How I can make a simple personality quiz in Flash? I've been searching for months for quiz/test codes, tutorials, examples, etc...but I can't find one that would work for a quiz with no "right" or "wrong" answer.
Basically what I want to do is have the user click on statements that they agree with, or answer questions that would lead to one of two possible results.
I have a simple quiz (Q and A) to design that contains both input fields as well as dynamic fields which gets a value (text or number) from an onClick action. When i submit the form, using the code from this thread (http://board.flashkit.com/board/show...hreadid=766156), i managed to get the input fields content to get saved on to the CSV file, however the dynamic content doesn't. it only works when i literally type the value in the text field.
View 8 RepliesI have made a start on my quiz, in order to complete the criterions I have to create a project (a quiz in my case) which uses a variety of methods and tools e.g. drag and drop features, user text input and numeric input etc.I had planned on creating 4 topics and 4 questions in each. Having searched the forum it appears that the common consensus for creating a quiz is to set up your questions in a XML file however I have no idea how to use this or what it is. Moreover from my research I found I appear to be doing things slightly different to other people who are doing or did a quiz. This difference is how the answers are input; I will be user input text fields along, multiply choice buttons etc. I also am placing my questions in different places for different sections and I am also required to use video.This may still be able to be done however I only have 29 days to complete the task and the way I'm planning will be quicker as I understand how it works at least. The first problem I am having is how to code for the input text. I plan on allowing for the user to input a word and then to compare that word against the correct answer. This also brings me onto my second problem. Once a section of questions has been completed I plan on taking the user to a screen which displays how many answers they got correct. This would involve tracking their answers and comparing them to a set of correct answers however I have no idea how to do this. (from what i have learnt recently the use of an array maybe?).
The final problem I am having at the moment is setting up a 'barrier of sorts' In my first question i have set up a mask which applies only to the image I have also placed on the stage. The mask is applied to a circle which can be dragged around displaying small sections of the picture at a time. I wish to stop the circle leaving the picture as it falls under the background once it as left the area of the image. This results it in disappearing. I have no idea how to solve this and I could not find information on it. The solution I think would be to stop the masked circle leaving the area of the picture OR to reset it back to original position if it is released outside the images area.My quiz is far from complete at the moment and I have not yet even finished the frames for each of the questions however these problems are fundamental to the quiz's success and so I felt I needed to confront them now.I can upload what I have done so far and send the link in a pm so you can see what I mean (if it is not already clear)
I'm trying to make a quiz with multiple question types (multiple choice, true/false, fill in the blank, drag/drop). The problem I am having is that the questions are not scoring correctly. Here's what happens
[Code]...
I have a working quiz but I want to know how to get the score of the number of correct answers the person got but I can't seem to figure out the code for it. This is my code below.
stop();// movie clip waits on buttonsgloss_mc._visible = false;// set the gloss initially to not visiblescore_int = 0;// score on the quiz is initially zero// button functionsq1_btn.onRelease = function() { scoreQuiz_fnc("1");};q2_btn.onRelease = function() { scoreQuiz_fnc("2");};q3_btn.onRelease = function() { scoreQuiz_fnc("3");};q4_btn.onRelease = function() {
[code]....
I'm trying to build a basic quiz - there are 6 questions and I want it to display a score at the end. Everything works and it shows a value at the end (but always '0'). It's not keeping proper scoring as users go along, it should be adding '1' point for each score, no matter what option is clicked it just traces '0' in the output window. Maybe something to do with the variable or? Kinda new to Flash, the chunk of code I believe to be the issue is below,
import flash.events.MouseEvent;
//varialbe for keeping score
var score:Number = 0;
//event listeners for button clicks, which will adjust the scoring array
[code].....
I am having trouble loading a quiz.swf into another another movie. To generate my quiz I goto
File > New > Templates > Quiz > Quiz_style_1
And in the first frame of the example quiz I add:
stop(); // To prevent playback
this._lockroot = true; // to preserve the heirarchy
Then I publish the quiz as testquizex.swf, and I can test this movie and it works fine by itself. Then in a different movie I start with a blank scene I add a keyframe and I insert
stop();
var mc:MovieClip = this.createEmptyMovieClip("mc", this.getNextHighestDepth());
mc.loadMovie("testquizex.swf");
Now the movie imports and loads into the frame and I can navigate through to the first question page, but the quiz doesn't actually work anymore i.e. drop targets dont work and the score won't increase. Is there anything else I have to do to the stock quiz template to make it importable into another project?
I'd like it to display a question on one page, then have a next button which takes the user to another page telling them if that question was correct or not, and if it is correct they can move on to the next question (by clicking another next button) and if they got it wrong, have to go back and answer it again. However I have no clue how to do this! which includes a quiz. Would it be a better idea to create the quiz in Flash or something and then embed it into my Java application? Or just do the whole thing in Java?
View 2 RepliesI'm trying to create a simple quiz that picks questions from an XML file, then checks the answer the user enters against the answers stored in the same XML file. Every time you press blue_btn it should bring up a new question. Right now I'm stuck -- it shows only the last question in the XML file, when I enter the right answer it tells me it's wrong, and when I press blue_btn again nothing happens.
[Code]....
I am using a qui developed as an opensource flash and running a php script to convert this to xml to drage data from database, this works absolutely fine, but I want to load an image into an empty movie clip and not sure where i am going wrong[code]...
View 0 RepliesI've looked online at different quiz-building tutorials, but almost all of them are for stand-alone quizzes. I am adding the quiz as part of a whole interface design. When you click on one of the sign buttons I have on it, a mask will appear and the first four quiz questions will appear. Once those are answered, the next four will appear (probably when they click "next" or something). When I get to the end, I want the results of their quiz to appear.I want to try to use the code my teacher wrote for me so I don't have to build anything extra.if that doesn't work, can I embed a .swf into the file I'm working on? I need this quiz; everything else in my project is done (aside from some tweaking) and I need this finished AND working by Dec. 17.[code]
View 2 RepliesI have developed a simple quiz game, but im having a slight problem with it.I have a variable set to myScore=0
Everytime you get a right answer it should increment 2points But when you get all 3 answers correct i get a final score of 4points
I have designed a flash-based quiz for a training program. they've requested to have a timer that runs throughout the movie to add pressure and action to the game and also to display their time at the end.
View 2 RepliesUseful link or resource or idea for creating a quiz in flash.My quiz has got these features that has to be mapped with the functionality
a) total of 150 questions divided in 4 modules
b) a time limit of 180 mts
c) option box or radio button for choices
d) mark for review functionality
e) negative marking
f) final review of correct and wrong answers
this is very similar to BITSAT exam conducted in India, by BITS PILANI as a online exam.
I wanted to randomise my quiz questions and to allow all questions to appear but no similar questions should appear twice. I tried to use arrays to do it but I kept having errors.
View 8 RepliesI have made a quiz from mixing and matching from various tutorials of the internet, and now want to make the questions (multiple choice) and possibly the answers appear shuffled. The xml looks like this:
<quiz>
<title>Quiz</title>
<items>
<item>
<question>In which continent is the country Japan located?</question>
<answer correct="y">Asia</answer>
<answer>Europe</answer>
<answer>Africa</answer>
<answer>America</answer>
</item>
and here is what I've got so far with the actionscript!
I need to do a basic fil in the blanks quiz.I have this code working in flash 5 but can't get in working for FP9. Any ideas. Ive tried searching online but no success.Also would it be possible to do multiple balnk fields to get checked?[code]
View 2 Replies