I have this code on a button that exist witin the movie clip that i want the action to take place.
onClipEvent (data) {
_root.goin.gotoAndPlay(12);
}
if I use (_root.this) it does not work either. how do I back track the function? like ../ or .. in a file directory?
what i want to do is go up and down an array, getting vars 1 to n and then back down from n to 1 and then back up again. i wrote this lame code that doesn't really work:
PHP Code:
//vars to use in if statement
i=1;
objNum=_root.hexArray.length;
[Code].....
I used the 3d transform tool to rotate and move an mc in 3d.How do i make it to behave as a 2d movie again... Reset doesn't work... it only resets all to 0 but it's still 3d.The only way I found was to delete it and drag it back from the library but is there a more common solution?
View 1 RepliesI have created an interactivity to simulate a product. To do this my project has multiple frames. Each frame contains an individual movie clip. The clips each contain buttons that change the display and go to and stop on specific frames based on which button was pressed. My problem is, after the interaction a movie clip may have been stopped on say frame 12, the next time the frame containing the movieclip is opened on the main timeline I need the movieclip to open on frame 12 . However, the movie clip opens back up at frame 1 each time not saving the interaction.
View 10 Repliesi have searched on the web and i haven't found anything that works.
How can i send to back a movieclip by actionscript?
The scenario (photo gallery): I have the stage. Then I have a movie clip with thumbnails on it. Click a thumbnail and it opens another movie clip that I have attempted to make look like a modal window-drk grey transparent, you can see through to the thumbnails it is sitting over, and the large pic appears on this. So click thumb, and go into movie clip with the rectangle background and large pic. User can scroll through large pics, and then click button on right that will "close" back to the thumbnails movie clip. The "close" button isn't working with or without the actionscript I have tried so far. And I don't know the correct actionscript that would close this movie clip back to the thumbnail movie clip.
View 7 RepliesI've got some movieclips where everytime when you click on one, that movieclip has to be send to the back.Most logic solution is MovieClip.swapDepth(1), so you swap with the movie wich is at the lowest depth, but for one reason or another, this results in the movieclip jumping to the front.An examplefile is in attachment.this is my script:
mc1.onRelease = function() {
mc1.swapDepths(1);
};[code].....
If you check my site I'm trying to make [URL] and click one of my buttons the menu/logo/music/.. will move to the coords..
Here's the script I used:
1st frame:
speed = 5;
Frame in which the action will take place:
MovieClip.prototype.move = function() {
[Code] ....
But if you try to click for example on the "contact" button and after "about" button you can see that my music button (right side) is closer to the main border... so why the mc's coords are little off if you had clicked different button before (or if the mc's coords are different than before)? [note that I need to use Math.floor and Math.round to make it look sharp and that the speed value is for all MC's number 5]. Also my MC location is set up to hole pixels..
What is the shortcut for going ONE step back, when being inside a MovieClip. I get inside the MovieClip using "Edit in place" (CMD+Alt+E), but HOW DO I GET OUT using a shortcut?(In the old days i could just use the 'edit in place' shortcut again without having anything selected, but since CS4 or 5 upgrade, that option is gone.)
View 4 RepliesI wanted to create a rain movieclip with the actionscript below, but i wanted the rain to appear at the back of a layer. How do i change the script?
//Creating an empty movieclip to attach the clip from library
_root.spring_mc.rain_mc.createEmptyMovieClip("hold er",this.getNextHighestDepth(0));
//settig variables
[code]......
I have a movieclip that I am using greensocks transformManager with so the user can rotate, skew, and scale the clip. This works fine, but I am trying to add a crop tool. If the image is rotated, when I send the image to the crop tool it measures the height of the image by the bounds of the rotated image, not the actual height of the image if it were square (re: not rotated).
So, what I tried to do what, after sending it to the crop tool, rotate it back to 0 before getting the bounds using this code:
[Code]....
I don't understand the math here. Shouldn't it just rotate 3rads in the positive direction to equal it out? How would I return it to 0;
I have a movie created that is broken down into sections on the timeline (home about contact etc) Each section has a movieclip I want to be able to be in the about movieclip and click a button that will bring you back to the main timeline contact section Heres is the actionscript I am using to navigate the main timeline for each section
stop();
//handle events for buttons...
index.addEventListener(MouseEvent.CLICK, clickSection);
about.addEventListener(MouseEvent.CLICK, clickSection);
wind.addEventListener(MouseEvent.CLICK, clickSection);
[Code].....
I have a btn within a Movieclip at a certain keyframe the user is asked if they want to go back to make another selection from a choice category (within the maintimeline)
As of now the code I have for the btn that jumps you back to the main timeline is:
on (press) { gotoAndStop(_root.stop(24));}
Does _root.stop(24) need to be in quotes?
ie. "_root.stop(24)"
how to create a two-sided movieclip and load a different image on each side.
View 1 RepliesI am using the ._height of a movieclip in my AS and for some reason one of these is coming back incorrect.It is off by 3.4 pixels.I can't see anything in the movie clip that would cause this.
View 1 RepliesIs there someway that you can arrange movieclips in as3? Like when you right click on it and you can arrange "Send to back", "Send to front". For example I've exported 2 Mc:s to as3 and made a new instance in as3 by referring to the class I exported. So is there someway I can decide which one to put infront of the other one? If it's confusing my goal is to at some point bring one of the Mc:s to the front, and on another point bring the other MC so the front.
View 1 Replies1: When I get back to my main game screen, how do I keep my MovieClip in the same place it was before.
2: When I run this code:
Code:
if(numberOfGras**** == 1){
mcGrass1.visible = false;
mcMonster.removeEventListener(Event.ENTER_FRAME, TouchingGrass1);
}
It makes mcGrass1 disappear, but not the event listener. When I touch the area where it was, it still goes to the screen "math". [URL] That is the location of my .fla
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline. I feel like I am so close.
Also is this an ok way to set this up? I couldn't figure out how to do it in one frame. I didn't realize this basic framework was going to be so difficult.
[Code].....
I can get my menu buttons to move me around the timeline, but am at a loss as to how to move to a frame on the main timeline using a button within a movieclip that has it's own timeline.
So what I mean is that on the mian timeline, a movieclip graphic with a button in it drops down. This movieclip has it's own timeline, and any AS to control the button has to be in this timeline. So how do I tell it 'when the button is clicked, go BACK to frame X on the MAIN timeline?
Here's the AS on the main timeline for the menu buttons (how would I adapt it to apply to buttonX within movieclipZ?, and where would I put this extra code in my movie?):
function Nav(event:MouseEvent):void {
trace("Nav "+arguments)
switch(event.target.name){
case "gilbert": gotoAndPlay(72); break;
[code]....
I have some submenu buttons in a movieclip on the mainline. My first level of navigation in on main timeline. The submenus are grouped in movieclips on the main timeline. I basically used the same code on the main navigation for the sub navigation except the code for the submenus is in that movie clip. My trace statement reads the button is clicked (which was a quantum leap for me) but I know I need some kind of _parent code in there so it knows to go to label back on main timeline.[code]...
View 3 RepliesI had attach a few movieclip in the main stage by using addChild() method. If I going to refer back to them inside other movieclip, How can i do so..
For example,
//attaching at the main stage
var earth1:MovieClip = new earth()
addChild(earth1);
[Code].....
How can I refer back this Movieclip from other movieclip's timeline?
how do I script a movieclip to repeatedly fade/move/scale from x to z back to x to z again and again..I've tried onEnterFrame with ..if statements and whatnot but with no luck.[code]
View 2 RepliesI'm using TweenMax to play a movieclip in reverse with a CLICK:
Code:
import gs.TweenMax;
mAboutGlow.addEventListener(MouseEvent.CLICK, mClickAbout);
function mClickAbout(e:MouseEvent):void {
TweenMax.to(mBoxContact, 1, {frame:1});
}
How would I use MOTION_FINISH (or equivalent) to trigger a gotoAndStop after the movieclip has reverted back to frame 1?
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 RepliesI have a project (see attached) where I need to have the folders seem like they are floating in space, and I need the best way to make it so when you click on a back folder, it slides off the screen and come back in front of all the folders.
View 2 RepliesAnyways I am using action script 3.0 and I created multiple layers using just one scene. I created a layer with lables on them to mark where I want my buttons to point to and go to. I have the stop (); on the first frame. And I made my buttons mostly interactive with movie symbols and tweens.My first scene I have 2 doors, the user can pick which door to go to and it takes them into a different path.I made the buttons that are clicked to go forward, and then I tried to make an invisible button on the button edge of the scene to go backwards However, the PROBLEM is when I click my button to go backwards I am stuck on the first page and can't move forward.
function gotoOne(evt:Event):void{ gotoAndStop("one")}backbutton1.addEventListener("click",gotoOne);
function gotoFour(evt:Event):void{
[code].....
I have a GUI using Flex. I have a condition like i need to execute some command line arguments in the local machine and get the results back or output back to a textbox area. How can i do a button on submit, execute command in the local machine and return the output?Command to execute example:
echo logfile.log | grep username
Code:
button1.onRelease = function ()
{
// in this computer, it will now run a command, please wait.
}
I am working on a having external swfs get loaded into the main swf one by one from an array.I can get the first one to load, but it just keeps on playing the first item in the array over and over, instead of loading the next movie. I have a container on my stage, cleverly named "container" and I am using AS2 and loadMovie.
I am guessing my conditon on my if statement is off, but I am not sure how to tell the onEnterFrame to check the currentframe of the loaded swf and not the container itself. I might be way off, but in my mind I feel like this mostly makes sense, but knowing Flash it is probably not nearly enough coding.I might also add this won't be running on the web, so I don't need to worry about preloading swfs since it will be running directly off a PC onto a screen in our office.Here is my code:
Code:
var myClips:Array = ["movie1.swf", "movie2.swf", "movie3.swf", "white_logo.swf"];
var i:Number = 0;
_root.container.onEnterFrame = function() {[code].....
I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other.
right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
I have some knowledge of Flash, but not enough obviously. Right now I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other. right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
View 1 Replies