I'm trying out this goed, it moves and scales an mc "test"As you can see the mc will disappear on the right side.All this works succesful, only actionscript doesn't meet the condition given in the "if" statement. Wich results in no trace.What is the problem and how do I solve it?
Code:
function test() {
test.onEnterFrame = function() {
[code].....
I would like to remove objects from my array if they do not meet the condition. But I haven't been able to get the result i want.
[Code]...
I have a button on which an effect will play (_root.loc.gotoAndPlay part) but i only want this to happen once (the first time you roll or dragover the button)So i thought i'd do this by making a variable on the root (the lettlook variable, which by default is "no") and then on the rollover, dragover first play the loc movieclip and then set the variable to "yes" (so it'll never trigger again after the first time)so this is the script i made
Code:
on (rollOver, dragOver) {
if (_root.lettlook == "no") {
_root.loc.gotoAndPlay(2);
[code]....
Problem is, of course, that it doesn't work. It doesn't play the loc movieclip and it doesn't change the lettlook variable to yes.
I have a command script (framesSelected.jsfl - the code isbelow) which outputs information about frames selected to theoutput panel, which I find very useful. With CS4 (Windows XP), whenI place the jsfl file in the (suggested in the manual) folder(C:Program FilesAdobeAdobe Flash CS4enConfigurationCommands)I expect it to show in the command menu as it did in CS3. Itdoesn't. Can anybody tell me why, and what I must do now to get itto show? (script follows)
var current_tl = fl.getDocumentDOM().getTimeline();
var selectedFrames = current_tl.getSelectedFrames();
var selectedRegions = selectedFrames.length/3;
[code].....
I have a drop down menu on the _root with
[Code]....
as the AS causing it to drop down and return to its original position. Everything works great in Safari and Firefox. However, Internet Explorer doesn't recognize the "else" condition on the y-axis. It doesn't return the drop down to it's original position???
I do slide presentations on iPad via Flex IOS packager 4.6. The slides are swf's that have to be dynamically loaded at runtime because they change daily. Can't compile them in.
My slides load fine with animations and look great - but the animations on each slide loop. I can't stop them. When I decompile slide swf's I see the stop() commands there on each one. IOS just blows by these stop()'s though (PC doesn't). Interesting that the swf's load at all on IOS. I'd have thought the stop()'s would have prevented that. They do load though. IOS just doesn't honor the stop()'s. Animations play beautifully. Can I stop them some other way? Maybe externally from my main Flex code? Is there a way to stop a Flash animation without stop()? Maybe build the animation differently? Another product I've seen has solved this issue so I know a solution exists. When they play animations on IOS they stop.
I'm trying to target labeled frames using a simple gotoAndStop command but for some bizzare reason the code doesn't recognise labels only frames.
[Code]....
I have been given a rather long and complicated Flash movie which contains a number of bugs. The one that has me most perplexed is as to why the pause button is failing to stop the root timeline.[code]As you can see, the button also controls various mps "voiceovers", which stop and start correctly, yet the timeline animations continue to play.I have looked through the movie and there doesn't appear to be any Play function overwriting the buttons Stop command.
View 3 RepliesWell i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 RepliesI have a BD return by PHP without problem : I have "all_good" and "no_good" If the variable change my condition don't change ..... why
[Code]....
I'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesI have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
I'm working under as2 with variables in a web site navigation, i want to create a condition, a simple condition, for frame controling but i'm not sure how to code it.I have the content_fade_out variable, whenever a user clicks a navigation button, the variable should be checked to see wich movie clip to play. I know i can do it with an if but, if i do it with a "if" I would need add 5 ifs to each button, while i think somethin like this can be done:
variable value = Y
y = 0
_root.home_mc.gotoandplay
y = 1
_root.galery_mc.gotoandplay....
and so on, I'm just not sure how to set the variable value condition.
I'm making a simple animation in flash, but I need to make an OR statement:
if (xxxxx or yyyyy){
}
this is my code, but an error appears because of the "or", I had the same problem with "AND", but it was fixed by replacing it with .
Is it possible to have more than one condition on an if statement?eg. if something is black and if it is 40cm then do the following..both conditions must be fulfilled before the action can occur.
View 3 Repliesive tried with this script (as2)
on (press) {
if (triggermc._visible == true) {
if (d1.hitTest(_root.d2.hit)) {
[code].....
I need to specify more than one condition for visibiltyvisible="{data.allow && data.open}"However, this gives the error "The entity name must immediately follow the '&' in the entity reference."I could use a function, but I'd like to know if it is possible to do this directly with different syntax.
View 1 Repliesfor i know that i often fail when it comes to syntax, i thought i might ask how the syntax would be if i'd want to ask if two variables are set. say i'd want to let things happen if the variables _root.move==1 and at the same time _root.window==0.
in this piece of code:
onClipEvent (enterFrame) {
if (_root.move == 1) {
if (_root.mainVarX == 0) {
[Code].....
my problem is, that i let something scroll in front of a button on mouse release, and flash now thinks that i left the button and thinks it should fire up stuff that should happen on rollout, which shouldn't when i mouse release on the button.
Just I want to write a condition in a Function stating If condition. The following is the situation.
If myButtons_mc.alpha=0 then
myButtons_mc.alpha=1
Else myButtons_mc.alpha=0
I have 5 movie clips on stage made invisible. Each time only 1 movie clip appear randomly. The next movie clip appear on condition that the previous movie clip must disappear by pressing of a button. Example: mc - A,B,C,D,E
If B appear, a button must be pressed to make B disppear in order for the next button to appear randomly.
So, what I'm trying to do can't really be that hard, I still can't get it to work properly...
So, I have two textfields and one button. Whenever I type a set message into one of the textfields and then press the button, I want the other textfield to return another set message. Probably the trickier part: this should work both ways.
Is it possible to use a for loop within an if condtional statement? I have been trying but just get errors no matter what I do. I have a series of buttons that pop up in a window and I want to make it so a click anywhere outside of the buttons will close the pop up window. I have been doing this by running a hitTest that checks if any of the buttons are being touched one at a time. It works, but it seems overly tedious, especially since there are a lot of buttons. I do not want to put the hitTest on the background of the window because it will cause the mouse cursor to turn into a hand even when it is not over one of the actual buttons.
If the for loop can't be within an if condition, then maybe there is a better way to use the hitTest code, but I couldn't figure that out either. Here's a simplified version of what I have now (it works, but is too much code..):
[Code]....
It is very ridiculous that I can't remove a simple listenermethod :). I think this is a common problemWhen I am using removeEventListener manually, i.e outside thecondition its working fine, but whenever I am using it inside theif/else condition it is adding the listener in "true" mode but notremoving in the "false" mode.here is my code:
if (proAlign == true) {
trace("align Option = " + proAlign + " -- " + "this is true
part");
[code].....
I have a movie clip which is brought on to the stage by a tween function called introTween. After the introTween has finished, it has an eventhandler inside it which calls on 2 new tween functions to start. These are tweenX function which contains the myTweenX tween and tweenY function which contains the myTweenY tween. these functions loop round to keep the movie clip floating along the bottom of the stage. The movie clip can be dragged by the user. The problem I have is that when the user drags the movie clip during the introTween the dragIt function is called (see below) and when called its looking to stop the myTweenX and myTweenY tweens. However, because the introTween function hasn't finished, and thus hasn't called the tweenX and tweenY functions...then the dragIt function can't find myTweenX and myTweenY to stop(). how I would go about solving this problem? Is there some sort of IF condition I can put in the dragIt function which looks at whether the tweenX and tweenY functions have started or even the myTweenX and myTweenY tweens have started?
[Code]....
I've a problem with calling the movieclip from the library with the if else case.If I take out the if else condition, the code runs normally but when I do I can't. I tried numerous attempts to fix the code but it still failed.What I wanted to do is, when I click one button out of 3 buttons at the 1st frame, it will pass the string (either red, blue or orange) to answer textbox. Then I store the string into a var called tarotno to go through a if else condition to call the MovieClip according to the string passed.[code]
View 1 Repliespackage {
import flash.display.Sprite;
import flash.events.*;
import flash.net.FileReference;
import flash.net.FileReferenceList;
public class FileReferenceListExample extends Sprite {
[Code] .....
Code like the above will get executed as soon as loaded, how can I make it run under certain condition? Pretty much this in this answer:
function keyEvent(code:String):void {
// do something with the "code" parameter,
that looks like "alt+ctrl+D", may use .split('+'), etc
}
Look at this code:
var a:Number = 1;
var b:String = "hello";
if (a == 1 && b == "goodbye") {
trace("options a and b");
}
The book I am reading says: "In this example, the test would evaluate to true, because one of the two conditions (the first) is true. As a result, "option a or b" would be traced."Isn't the above statement incorrect? this if statement to me reads as "if a is 1 and b is goodbye THEN output it"
Imagine a multiplayer whiteboard where several people can draw at the same time. To keep it simple, lets say there's a single object on the whiteboard which can be moved or deleted by any user. There is no notion of user-owned objects (i.e. it's important that any user be allowed to manipulate any object... it's a free-for-all whiteboard)My problem is this... if two users try to do a different action on the object at the same time, i.e. one deletes it the other moves it, what happens?
Right now- in just letting the messages go through, it gets all out of whack.One idea was to have a serverside control which resolves who has control of the object, and nothing is allowed to happen clientside until that conflict is resolved. Conflict resolution can be based on a first-come, first-serve basis.Even though this can happen very fast, the small delay (~50-300ms) is unacceptable since movement must be instantaneous on the client side. For example, instead of manipulating objects, think of a pen. For there to be a delay till they've already started drawing... not good!
Another idea was to have a "request control" button, which asks the serverside extension for control.... same idea as before, but now they aren't frustrated by the initial delay of pen drawing. This is also not so good though since they must hit that button till they can do anything, and this whiteboard is really meant for kids..
I want to start my for loop at a certain number, and make it loop. Like this: 5, 6, 7, 8, 9, 10, 0, 1, 2, 3, 4
If the maximum number is 10 and it starts at 5. The reason is because I want to loop through every tile in my game in a certain order (top to down, then go right).
[Code]...