ActionScript 2.0 :: Create An If Statement That Would Load A Movie Clip?
Apr 19, 2004
is there a way to create an if statement that would load a movie clip after a different movieclip is loaded.
i have text_mc and scroll_mc. I dont want scroll_mc to load unless the content is loaded into the text_mc.
I tryed to make an if statement sort of like a something used for a preloader but I must have been off just a bit because it was not working. I dont even know if it possible.
View 7 Replies
Similar Posts:
Apr 19, 2004
is there a way to create an if statement that would load a movie clip after a different movieclip is loaded.i have text_mc and scroll_mc. I dont want scroll_mc to load unless the content is loaded into the text_mc.I tryed to make an if statement sort of like a something used for a preloader but I must have been off just a bit because it was not working. I dont even know if it possible.
View 7 Replies
Aug 9, 2009
I'm creating a draggable movie clip (an arrow symbol) that drags along a rectangular track. Works fine but my issue is when the arrow's y axis is at a certain position, it needs to remove a movie clip instance and also run a trace statement. Right now, it's not doing that (if I change the == in the if statement to += it works but then it just works as soon as you mouse down on the arrow) and I'm wondering where I'm goofing up. Here's my code:
import flash.display.Sprite;
import flash.display.DisplayObject;
import flash.events.MouseEvent;
[code]...
View 9 Replies
Apr 8, 2012
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Replies
Mar 22, 2004
I just have a button and a movie clip (MenuUp) and i want the button to be able to make the movie clip jump to different frames...
[Code]...
View 3 Replies
Jun 27, 2006
if it is possible to load a movie clip into a blank movie clip?On my main timeline I have a button (mode_btn) and I want to be able to click it and load another movie clip (mode_options_mc) into a blank movie clip I have (mode_empty_mc). Is this even possible?
View 11 Replies
Mar 21, 2004
OK frame 1 new fla and I type the following code:
[AS]createEmptyMovieClip("clip1",0);
clip1.createEmptyMovieClip("clip2",1);[/AS]
I have tried over and over again to get this to work but it won't! I want to create an empty MC and then create anoth MC within the first!
View 5 Replies
May 24, 2010
I'm trying to get a movie clip to automatically load up another external clip, after playing an embedded flv.
This is what I've tried so far:
var holdFrame = setInterval( holdFrame, 5000);
gotoAndPlay(
_root.mc_holder.loadMovie("swf/library.swf"));
clearInterval (holdFrame);
Although it throws no errors, the setInterval is ignored and it just loads direct into the next mc clip.
View 9 Replies
Oct 20, 2004
I want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
View 5 Replies
Jul 12, 2010
what I'm trying to do is create an else if argument for each object in an array based on a user set number
Code:
for(var i:int=0; i < numberOfElseIfs; i++){
GENERATE AS3 CODE
}
to which I want it to GENERATE THE FOLLOWING CODE:
Code:
}else if(baskets[i].used == false){
baskets[i].used = true;
drawButton(i);
}
the problem is obviously that the compiler reads this code rather than understanding I'm trying to regenerate the code within the for loop...does that make sense :S? So basically I need as3 to read the code between the for statement as if it is going to echo that out later. Is this even possible?
View 4 Replies
May 16, 2010
I have a page with 8 photos that are movie clips. I'm attempting code that allows the user to click on each photo/movie clip and this loads a movie clip inside which is a larger version of the photo.
how to do this and then allow the user to click the photo to close?
I realize this is a strange way to organize photos but they laid out over a detailed photo album background.
View 1 Replies
Oct 6, 2009
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
View 7 Replies
Dec 30, 2005
i wanna change color of mc. I have buttom Test and Parametri. In Test is movie testing.swf in Parametri you can change color of movie clips. in file starttesting is make like this:
in layer1 is mcPlayer. In this mcPlayer are three layers, action, container and buttoms. in action layer is this code:
Code:
mcButtonParametri.onRelease = function():Void{
addWindow("mcPar");
}
[Code]....
How can I change color of mcOksid(testing.fla), but color will be change when i push a upload buttom? WHen i push reset buttom, the color will come back to default.
Second problem, in testing.fla in layer OKSID, i have mcOksid and mcOksid2. Know if i change color of mcOksid to blue, mcOksid2 has to be blue too.
View 1 Replies
Jun 24, 2008
What I'd like to do is have a checkbox, that when it is checked it loads a movie into an empty movie clip, and when it is unchecked, it loads a different movie into the empty movie clip.Also if possible I'd like to find a way to output to a variable whether the same checkbox is checked or not. And send the info from the variable in an email.
View 11 Replies
Jun 3, 2011
I have an existing movie clip on the stage and i want to load a .swf into it. How?
View 9 Replies
Oct 17, 2005
trouble getting a movie to load in an empty movie clip. I am hoping I'm missing something simple.I have a button with the instance name SPS_btn on a layer I've called buttons.Below the button layer i've got a layer called movie clips that contains an emptymovie clip called mainStage_mc.I want to load a .swf into into mainStage_mc. both the buttons and their actions occur on the first frame.I have used this code but it not working.
on (release) {loadMovie (new002.swf, mainStage_mc);
I just get a blue area but the movie does not load. I can run the movie fun locally by clicking on new002.swf file.i also tried the behaviors panel, which produces this code but it also doesn't work:
on (release) {loadMovie ("new002.swf",mainStage_mc);
//load Movie Behavior
if(this.mainStage_mc == Number(this.mainStage_mc)){[code]........
for some reason it will load if i use loadMovieNum () but the registration point is in the top right corner and i don't want that.What's the best way to debug this?When i use test movie the output window dosen't show an error but something's wrong.how can I test if is a path problem? A problem with the loaded movie or a problem with something else? the movie new002.swf is 393KB. I tired making a smaller 2kbmovie using the code above and it wouldn't load either.
View 3 Replies
Nov 8, 2006
I have a site with a container clip which all other content loads into. When one movie loads, it has a button that I'd like to be able to click to go to another page in the site (ie. unload it's parent movie and load another swf into the same container clip.
How can I address the parent container clip and tell it to unload this movie and load another swf into it?
View 5 Replies
Jun 19, 2009
Just upgraded to CS4/AS3, and I can't figure out how to load one .swf after another, llowing each to be run once, and only once. I don't think I should have to alter the target movies, as I should be ale to tell when the laoded movie is at it's last frame.So I have an string[] that holds the filenames of the target swfs to load. In effect:
movieURL = "path/to/movie.swf";
mcHolder.loadMovie(movieURL, "mcHolder") // anchor Movie in Library
while (mcHolder._currentFrame < mcHolder._totalFrames) {
[code]....
View 1 Replies
Mar 2, 2010
How to load a movie[.swf] at the end of another movie[.swf] in AS3?
View 2 Replies
Oct 4, 2009
my goal is to have a small circle movie clip (would it work as a movie clip?) spawn when the mouse button is pressed. I know how to add the code for the button being pressed, but I do not know how to create the object on demand.
View 5 Replies
Nov 2, 2009
i am new to flash, i have cs4.i created a 3 second flash animation of a logo.i would like to export that into other flash projects, so that those projects will play the logo first.so what is the best and most efficient way to do that?i have tried to export the logo.fla file as a movie clip or swf file but importing it into a new flash project is a bit weird, like it doesn't come in as a single symbol, but as all of the components that make up the original animation.i have watched many tutorials on nested timelines, but i can not find one on creating a mulitlayered movie clip in a separate fla file and then importing that as a single symbol into a new project fla.
View 3 Replies
Mar 18, 2010
I've been working with flash for a very long time both in as2 and 3 I recently had to re-visit a project in as2 and found something odd. When I create a movie clip with a name: box_mc and inside I have a function ex:
[Code]...
nothing happens. It has me totally stumped as I'm sure I've done this a million times what's up what is wrong.
View 3 Replies
Dec 16, 2010
Just wanted to find out what the best practice is. Say I have created all the common components of my webpage, which will be the same across all pages e.g. header, footer, navbar etc. Each of these are there own individual movieclip. The only part of each webpage which changes will be the center content. Should I select all the common components movieclips, and create one movieclip out of them all? Is this common practice or should I keep them separate?
View 2 Replies
Mar 11, 2010
I am trying to create a UI movie clip that can be used across different scenes. It uses variables from the root scope to determine states. When i press the mute button is works fine, however when i try to un-mute things go weird.Sometimes it takes 2 clicks to unmute, sometimes more. It seem
View 1 Replies
Jan 27, 2012
I want to create a map of the Brazil out of it's elements, i.e. states, and I find it really confusing from where to start in CS5. how can I make movie clips states out of map, 'cause drawing the lines isn't that thrilling at all.
It may sound like a dump Q. but I am a starter in coding in AS, so I think you will understand.
View 2 Replies
May 19, 2005
I want to be able to create a movie clip on the fly, inside another movie clip, not duplicate, but create an instance of a clip that only exists in the library. The movie clip that the new clip must be created in is going to have a loadMovie already applied to it, so anything existing in it will be removed. I need a way to insert a clip from the library into this parent mc.
I tried attachMovie() but its not seeming to work.
View 4 Replies
Mar 18, 2011
Basically instead of var thing_mc:test_mc=new test_mc I want to somehow do thing_mc:String=new String, where String is defined by an array. I've tried several methods and searched all over, but I can't find out how to do this. I don't know if I'm not searching for the right thing or what, but I just can't find an answer.
[Code]...
I know what's obviously wrong, but I don't know what's right and that's the easiest to understand example of what I'm trying to achieve.
View 1 Replies
Jan 18, 2010
I want to make make a button out of a movieclip (on realease plays the animation) but i can't seem to get it right --' i tried to make a movieclip inside a button but it only works while pressing "click" and i want it on realease. btw i'm working on AS3 sorry if this is too basic i missed that class --' btw the mc is called "flip1".
View 2 Replies
Jul 14, 2011
For example if I wanted to do something like make a function which is used to spawn multiple instances of an enemy movie clip.[code]do this a specified number of times.How would I go about doing something like this? And what is the syntax for referring to these generated movie clips from outside of the movie clip (so i could do things like remove them, change x/y,alpha, ect, individually)I really just don't have an intuition for how movie clips actually work in actionscript, and its been holding me back a great deal.
View 1 Replies
Jul 27, 2009
How can I create a context menu for each movie clip in as2
View 2 Replies