I have a movie that plays a series of movie clips, it will play a clip, then, once the clip has finished, it will move to frame 2, where it will play another clip, and so on
Is there any way for the root timeline to now when a child movie clip has completed. I currently have the child clips do _root.nextframe, but i would prefer to have all control within the root
I'm building a flash interface using papervision, when the window is resized i need to recreate the scene. using RESIZE Listener but when the user resizes the window, the listener function is called several times which recreates my scene several times.
does anyone know if there is a way to detect when a user has finished resizing the window so that i can recreate the scene just once?
I've got video that loads from an external source (not streaming though) and would like to be able to detect when the video has stopped playing. The video starts playing when the user clicks the "Play" button, but when it has finished, I want Flash to display an image, so I need to know when it has gotten to the end.BTW: it's likely to be MPEG video too(!) as new content will need to be dumped into the external video folder by someone who does not have Flash nor the ability to create FLV. If this is only possible with FLV (and I know it is -- I've seen other posts on this forum about that) then maybe I should tell this person to get software to enable them to convert videos to FLV before dumping them in the folder)
View 1 RepliesI am using the loader class to load an external swf "cube_final.swf". note I am setting a movie_clip (set on stage) to alpha=0 as I want it to remain invisble until the loaded swf finishes playing. I will then set alpha = 100% .
But how to i detect that the swf has finished playing? I can detect whether its loaded (i'll place a preloader in the loading() function)
this.open_cube.alpha = 0
var introLoader:Loader;
function loadIntro(url:String):void {
[Code]....
I have an external transparent swf loading in to my movie. The swf has to be imported over a button element on stage. The swf plays for a few seconds than it appears to go off-stage... at which point I need to free up that button to be clicked.
So, I need to detect when that movie has finished playing and then unload.
My code so far.
Code:
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
[Code]....
I have 5 loaded swf files, I can play them one by one using "next" button. But now I need a "autoplay " button. My thinking is to dectect one swf finished, then call the "next" function, so it can be played automaticly. The thing is I don't know how to dectect one swf is finished playing.
View 9 Replieshow to detect if stream finished playing sound/movie?
View 1 RepliesI need to create a splash page type thing. It needs to play a flash movie and then when that movie has finished show a full screen image using html/js. THe movie will be flash and the image display will be javascript powered.
View 2 Repliesif I have an event listerner (mouse, keyboard, enterframe,....event) that is being triggered, and when it finishes its event, something that is able to detect the finished event listener and fire out another sets of event.
It works more like MOTION_FINISH in TweenEvent, but it is only available for TweenEvent only, what if I want to detect a mousclick, keyboard, enterframe or even touch event?
How can I detect when a video has finished playing a.k.a stopped playing, so I can tell flash to play the next video in an array?
This is my code:
Code: Select allvar x:XML = new XML();
x.ignoreWhite = true;
var urls:Array = new Array();
[code]....
How can I detect when a video has finished playing a.k.a stopped playing, so I can tell flash to play the next video in an array?
This is my code:
Code: Select allvar x:XML = new XML();
x.ignoreWhite = true;
var urls:Array = new Array();
var desc:Array = new Array();
[Code]....
_root.object_1.sunny.gotoAndPlay("walk"); _root.object_1.sunny.gotoAndPlay("laugh");Hi, I code the following. But it jumps straight to the seconf mc "laugh". Is there nbo way of playing walk and on finishing playing laugh.
View 4 RepliesI'm working on a project where a SWF will play (as sort of a splash), followed by JS. After the video plays, the navigation and content will appear, and the video will fade out. I'm just wondering what would be the best way to accomplish this? Play the video first and then load everything via ajax behind the scenes? The goal is to be as seamless as possible and I am having a flash asset provided to me by the client.
View 1 RepliesNeed to make a photo gallery in flash. Not sure how to put the .swf into dreamweaver when finished.
View 2 RepliesA.swf has an empty_mc on it's stage. Loading into the empty_mc is B.swf.B.swf plays C.flv. After the C.flv is done playing I want B.swf to tell A.swf to go to frame 3
View 2 Repliesif someone decompiles my code, do they see my comments?
View 1 RepliesI have set up a nice video site for a client. I have a sub menu where you can select swf files. Each swf has an FLV attatched to it. I prefered this method over XML for various reasons.In any case I would like after the swf has loaded, and the flv COMPLETES the entire movie, to automatically go to the next swf file and start that flv. I've tried many codes with no luck.
View 2 RepliesIm using an instance of the FLV PLayback component, how can I find out if the video is finished so I can then do another function?
View 2 RepliesI'm using Actionscript 2 for this interactive.This is what I'm trying to get a button to do:on release:check "mainmovie1" mc on main timeline.If "mainmovie1" mc's timeline is at frame labeled "finished" go to label "1.0" on main timeline If not, go to label "fake_1.0" main timeline
View 2 Repliesi have a client who wants to make a school system on his website, now i've done that, however what my client wants is to put wmv or flv files inside every lesson and he wants to be sure that the user who has registered to the online school WATCHES fully all the wmv or flv and then redirect him to a quiz page where he will take a test.My client wants to be sure that the users are watching the wmv or flv files before doing any quiz.SO is there a way where i can know when the wmv or flv file has FINISHED playing so that i would redirect them to another page??
View 1 RepliesHow do I check when a sound in finished, example:
Quote:
var music:Sound=new Sound(newURLRequest("test.mp3"));
var sc:SoundChannel = music.play();
How do I tell when that sound is finished?
I have an swf loaded into my main swf. So far I can get a button in the loaded swf, to link to a frame in my main swf. However, how can I let my main swf know when the loaded swf has finished playing?Here is my code so far:
Code:
stop();
var imageRequest:URLRequest = new URLRequest("dylanTalking1.swf");
var imageLoader:Loader = new Loader();
[code]....
But it does not seem to work.
I'm making a flash movie (in cs4 as2) with some textboxes that should enter the stage when a button is being clicked. I have made one box that works the way it should, and now I'm about to make several boxes that looks similar (different size/different text though). Is there an easy way to make a copy of the finished textbox, or should I duplicate every object in it to make new ones?
View 4 RepliesI am making a title sequence to a flash site. I load the sequence with addchild. After the title is finished I want to unload the title and play a function.
How can I unload the title movie once its finished? I know I should use removeChild, but I only want to unload the movie after a certain time.
In as2 I am using:
_parent.gotoAndPlay(_parent._currentframe + 1);
to have one movieclip play and then when it finishes the next movieclip plays. How do I do this is as3?
I have three functions and I want to play them one by one when each of them completes the tasks inside. How can I add an eventlistener to a function to check if it is finished?So the following is the example:
function generateIdeaBalloons():void { var ideas1:MovieClip = new idea1 (); ideas1.x = 480; ideas1.y = 248; container.addChild(ideas1);
TweenLite.to(container.ideas1, 1, {delay:0.5, x:50, ease:Quart.easeOut});}
[code].....
I've recently started using Flash in CS4 and finished up a short cycle and exported it as a .mov to find it had clipped the last two frames, Does anyon know why? Or how to stop it from clipping my work?
View 1 RepliesThe following code loades text into a textfield the problem I'm having is the routine at the bottom runs before the text loads and the scrollbar disappears even when there's enough text to overflow the textfield. How would I make sure the text has finished loading before running the code that enables/disables the scrollbar?
mainText.htmlText = main[1];textFieldLength = mainText.text.length; if(mainText.length > textFieldLength){ mainScroll._visible = true; }else{ mainScroll._visible = false; }
I am looking for code that would let me detect when an flv has finished playing and advance the playback head to the next frame. So to set this up I have my flv on frame 1 (instance name vid1) and I want it to automatically "gotoandstop" on frame 2 when "vid1" is finished playing.
View 4 RepliesI have an urgent issue, I have created an swf file that loads the external FLV, however when finished playing the video stops on the final frame of the FLV.What I want is for the video to unload itself.
if(_root.video1 == undefined){
vStream = "15_IT_CURVES_BECKS_700x400.flv";
}else{
[code]....