I'm using Actionscript 2 for this interactive.This is what I'm trying to get a button to do:on release:check "mainmovie1" mc on main timeline.If "mainmovie1" mc's timeline is at frame labeled "finished" go to label "1.0" on main timeline If not, go to label "fake_1.0" main timeline
View 2 RepliesI have main flash file (main.swf) that will load movie clips dynamically one after the other from a source xml file. I need to check if the movie clip currently loaded is finished so that the main.swf will trigger the code to load the other movie clip. I can use both emptyMovieClip or loader component with contentPath to load the external swf files.
View 3 RepliesI'm having some difficulties on checking when an animation in a movieclip is finished. It's not a tween, otherwise I could make a tween handler with the "onMotionFinished"-property. My situation is different.My movieclip has 60 frames with each frame containing a 3D image. These 60 frames make the impression that a die is rotated in 3D.How do I check in the actions of my scene (root) when the animation is finished?
I already tried making an interval that constantly polls if a variable "finished" is set to true (which the movieclip sets to true on its last frame).This solution isn't really accurate enough due to the interval number.Setting the interval to 1 millisecond won't do any good either.Is there a listener object or something else that makes this possible?On my last frame of the movieclip is a stop() statement which might be polled by a listener?
I have a movieclip that plays on click of my 3 buttons I managed to get that working fine. When I click a button I want to temporarily disable all buttons until the movieclip finishes playing then enable the buttons to be clickable again.
my code looks like this:
stop();
but1.addEventListener(MouseEvent.CLICK,but1_onMous eClick);
function but1_onMouseClick(e:MouseEvent):void
[Code]....
Then same thing for but2 and but3 only with gotoAndStop(2 or 3 );
and then I have a stop(); at the 1st frame in my movieclip.
How do I check when a sound in finished, example:
Quote:
var music:Sound=new Sound(newURLRequest("test.mp3"));
var sc:SoundChannel = music.play();
How do I tell when that sound is finished?
i've got this code:
[Code]....
what i want is that when you press the left or right key the back or further function is only processed when _root.done = "a" (or true something else)... but now it doesn't work... _root.done is always "a".
i've got this code:
Code:
_root.done = "a";
var myListener = new Object();
myListener.onKeyDown = function() {
switch (Key.getCode()) {
[code]....
what i want is that when you press the left or right key the back or further function is only processed when _root.done = "a" (or true something else)... but now it doesn't work... _root.done is always "a"...
What I was looking for is a way to check if a tween has finished for BOTH clips. I thought I could try it like this:
Code:
;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var xScaleT:Tween = new Tween(kText, "_rotation", Elastic.easeOut, 0, 360, 3, true);
[code]....
But I noticed that first the ending of xScaleT is triggerd after 3 secs. and after that the ending of XPosT 9 secs. later. What I want is for this.yoyo() to occur if BOTH xScaleT and XPosT have finished. There isn't something like 'onMotionFinishedAll' ?
How do i check whether an external SWF which is loaded onto a movieclip sub_mc.loadMovie("introduction_1.swf")) has finished loading or not. If the loading is done, then an animatoin inside a movieclip will be played, else the preloader continues
View 1 RepliesHow do you check when the movie clip has finished playing?
View 1 RepliesI'm sure this has been asked before, but I couldn't find the right answer.
I want my MC to load after a button is clicked. When that MC is finished playing I want an imported FLV to play. [code]...
What i'm trying to do is: check if one item of my movieclip is a button and if it is then check its vertical postion and if it's < 70 then disable the button....
so i'm using this but it doesn't seem to work
onClipEvent(enterFrame){
for(var prop in this){
if(typeof this[prop] == "button"){
if(this[prop]._y < 70){this[prop].enabled = false}else{{this[prop].enabled = true}
}}}}
How would you tell a movieclip button to check to see if movie1.swf is loaded, and if movie1.swf is loaded go to and play the frame in movie1.swf? If movie1.swf is not loaded, I don't want movie1.swf to go to and play.
View 1 RepliesI am currently trying my 5. workaround to get my menu done. . I want to move a series of 4 buttons up, after a click and when all buttons finished their movement I want the bottom 3 to move down again.
My big problem ist, that I dont get a check working to see if the function move() hast finished in order to fire the function open(). Is there any listener or so?
Here is my code:
Code:
//Setup and register with Zego Engine
import com.mosesSupposes.fuse.*;
ZigoEngine.simpleSetup( Shortcuts, PennerEasing, Fuse );
[Code].....
In as2 I am using:
_parent.gotoAndPlay(_parent._currentframe + 1);
to have one movieclip play and then when it finishes the next movieclip plays. How do I do this is as3?
I'm just wondering if there is an event for MovieClips that tells when the MovieClip's animation has finished playing. Basically, I have an explosion movie clip that I put on the stage. I want to have it animate once through it's loop, then remove itself.
View 1 RepliesI've got all of my ActionScript 3 in a document class file. I want to stop a child movieclip when the animation has finished.
How do I add a listener for that and trigger some code on the last frame of the child MC?
i want to play an animation that is converted into a movieclip and indicate success of that level and then after the movieclip is finished playing then i want to run a function which will bring user to the next level.
View 4 RepliesSo basically i'm trying to allow the movieclip to play and once its played move onto the next frame.
I'm using Actionscript 3.0. and the movie clips around 6-7 seconds long.
I've got an animation (arrows following paths on a map), and I need it to repeat about 10 times per second, so that there's an endless stream of arrows following their paths.
View 2 RepliesI am loading a 29 frame movieclip on fame 15 of the main timeline. Is there a way to have it continue playing maintimeline when it finishes. So when it gets to frame 20 of the movieclip AS sends control back to frame 16 of the maintimeline.
View 1 RepliesThe problem I have is that I have created a Movie clip of an animated logo. The timeline within the movieclip contains 163 frames.
I have placed the movie clip on the main timeline at frame 1. What I would like to happen is the movie clip to the play all the way through and then move to the next frame (frame 2) of the main timeline to continue the animation. the next frame has a frame label, named 'main'. I have split the timeline up into sections as I am created a webpage.
There must be a pretty straight forward Actionscript code to do this, I have come across some things but they dont seem to make much sense to me. I am pretty good at the drawing and animation side of things in flash but I complete newbie when it comes to the Actionscript code.
I am in a movieclip, on the 1st frame of my main timeline. Once my movieclip has reached a point/finished, I would like return to the main timeline.
View 16 RepliesI've got all of my ActionScript 3 in a document class file. I want to stop a child movieclip when the animation has finished.
How do I add a listener for that and trigger some code on the last frame of the child MC?
I have a slideshow that loads an image via XML, then adds said image to a placeholder inside a movie clip, and then proceeds to play a little sliding animation via the movie clip. What I need to do is figure out how to get an event that the movie clip is finished and sitting back on frame 1 so that I can run a "nextImage" function that loads the next image from the XML. I'm pretty new to actionscript, and I can't for the life of me figure out how to properly handle what should be a simple event. If I put a simple listener at the end of the movieclip, it doesn't talk to the main script at all?
View 6 RepliesI have a button that is deactivated when it is clicked. The movie clip is played and the button is activated. But I don't know how to reactivate the button once the movie clip is complete.
readme.addEventListener(MouseEvent.CLICK, playMe1);
function playMe1(e:MouseEvent):void{
SoundMixer.stopAll();
[Code]....
How do I reactivate the button after the movie clip is complete?
I'm trying to make a script that will disable leftarrow till the animation is finished. I made a crude attempt myself but it doesn't work :/.
[AS]import mx.transitions.Tween;
allowChanging = true;
if (allowChanging == true) {
[Code].....
created the gallery and made thumbnails vertical everything works fine except my tween for the thumbnails. i need help disabling the hit_up and hit_down buttons for the amount of time the tween is going on so someone can't click on the button till the tween is finished.
[Code]...
I have a simple Flash-player button (toggle play/stop) that plays MP3s. When I press play the MP3 starts and the button changes to stop. When I press again the music stops and the stop-button changes to play. I have several player-buttons on my page. How do I stop all sounds when I press play on one of the buttons? As of now, I can start several MP3 at the same time and I don't want that. I've tried this:
Code:
import flash.media.SoundMixer;
SoundMixer.stopAll();
But it doesn't work out. Do I need to number the players somehow?
Also, when the MP3 has finished playing it should turn into a play button. As of right now it's a stop-button when it's finished playing. How do I change it to a play-button? This is the Actionscript 3 code:
var flashVars=this.root.loaderInfo.parameters;
var loadSnd:URLRequest = new URLRequest(flashVars.myVar);
var thisSnd:Sound = new Sound();
var sndTrans: SoundChannel = new SoundChannel();
thisSnd.load(loadSnd);
[Code] .....
I have linked a button to another scene, in whic the second scene automatically plays some animation. I want to create a button on this new scene, after the animation has finished, which reverses the animation and then automatically goes back to the original scene. I have this code:
[Code]...