im trying to find the height of a movie clip containing a dynamic text box loading an external text file. i need to determine the height of the movie clip outside of this function but whenever i try to do that i get the initial size of the movie clip and not the resized size after the external text has loaded. i have tried returning the height to this function but when i trace this value i simply get [type Function].[code]
View 4 Replies
I am resizing a movie clips height automatically to match the height of some dynamic text that is displayed above it (will eventually be loading it from xml ). is there a way to keep a safe margin top and bottom? this is my code so far Text_Box_Graphic.height = Text_Box.height;
View 2 RepliesIs it possible in Flash MX to set the height of a dynamic text box based on the text that is currently displayed in that box?
View 3 RepliesWhat code can I use to shrink a piece of text in a dynamic text field to fit within a certain height and width.
View 1 RepliesAs part of my flash design, I want to have some tweening text. At the beginning of the tween, the height of the text needs to be distorted ('too tall'), and at the end of the tween, the text will have settled into its correct height. However, when I try to scale the text in the first keyframe of the tween, the font size changes along with the text field height. Normally, I could just make the text into an image, but this needs to be a dynamic text field. Is there no way to scale the height of the text field and distorting the text height without changing the font size?
View 1 RepliesI have a mc and inside of it I have 9 dynamic text. I want to be able to set its height dynamically so it will look like a table. And in addition, once the height is set the text inside of it will be vertically aligned to center. Is this possible? Here's the sample file.
View 7 Replies[URL]When you double click on the picture the photo descrpition box is the same and I'd like to make it dynamic. The movie clip that contains the text box is called "flashmo_pic_info" and the text box name is "photo_description". How can make it so that the text box is the size of whatever is in photo_description? Here is the AS so you don't have to download the template. I had to take out some of the variable declarations to make this fit.
code:
function load_gallery(xml_file:String):void
{
var xml_loader:URLLoader = new URLLoader();
[code]....
Is there a way to adjust the height of a variable text fieldto match the dynamic content populated at run-time?I have a dynamic text field on the stage. I replace the copyin that field at run-time and it may be 1, 2, 3, or 4 lines long ifthe width of the text field stays the same. Is there a way tocontrol the height of the control to adjust to support only thenumber of lines needed? I'd like to set another control on thestage right below this field but I need the correct height of the
View 1 RepliesI am using this script (3.0) to set the text of a dynamic text field...
stop();
my_Btn.addEventListener(MouseEvent.MOUSE_OVER, onMouseover);
function onMouseover(event:MouseEvent):void
[Code].....
How do I set the height and width of the text?
I have a menu like the one here. I need some of the menus to be 2 lines and others single line.Basically, the menu is set to use dynamic text with multiple lines and word wrap inside a movie clip. So far, I can either get it to do single or double lines of menu, but not both
View 4 RepliesBasically I have a textfield that will have a fixed width and wrap the text, which will be passed to it dynamically. Since the text will be dynamic,there's no guarantee of how many lines the text will take up.Directly underneath that textfield i have another text field that will also take dynamic text. Think of it as a title and a subtitle.so I'll have something like this:
Code:
var title:TextField = new TextField();
var subtitle:TextField = new TextField();
title.wordWrap = true;
[code]....
and probably others that I'm forgetting. Getting it to work with a single line of text isn't really a problem, but as soon as the text begins to wrap to multiple lines, everything i've tried seems to fall apart.
I'm working on an A.S 2 document that loads chunks of text from an xml file and places them in different dynamic text boxes. The amount of text in each section differs but each one has to appear one after the other regardless of the size.At the minute I'm trying to position the second one beneath the first by making its y value 10 + the height of the first one. however the height that i keep getting is the original one and not the re-sized one.
Africadetails.autoSize = true;
Africaname.autoSize = true;
Africadetails._y = (Africaname._y) + (Africaname._height) + (10);
AfricaURL._y = (Africadetails._y) + (Africadetails._height) + (10);
I'm working on an A.S 2 that loads chunks of text from an xml file and places them in different dynamic text boxes. The amount of text in each section differs but each one has to appear one after the other regardless of the size. At the minute I'm trying to position the second one beneath the first by making its y value 10 + the height of the first one. however the height that i keep getting is the original one and not the re-sized one.
My code is
Africadetails.autoSize = true;
Africaname.autoSize = true;
Africadetails._y = (Africaname._y) + (Africaname._height) + (10);
AfricaURL._y = (Africadetails._y) + (Africadetails._height) + (10);
I am using a scrollbar as demonstrated in OO scrollbar part 1 and have it working great, except that when you scroll the text, it seem to add a bunch of space at the end of the text field and then does not scroll back up to the top of the text field, but rather ends up in the middle.
Seems like it is somehow measuring the height of the text field at the wrong time? I would guess that it has the right height dimensions (due to the extra space at the bottom) but that it somehow is getting the wrong y coordinate. [code]...
I'm using a tweening engine and I need to be able to base the _yscale % of a movie clip off the height of a dynamic text field that is slightly smaller contained within the movie clip. 52 pixels smaller to be exact.I'm very poor at math but I'm guessing so far that some variable needs to be declared to factor the percentage based off the height of the dynamic text field. And I just can't think of how to do that.What I know so far:movie clip height at 100% _yscale = 396 the 'buffer' space above and below the dynamic field = 52.So if my dynamic text field height = 0, my movie clip would be 52 pixels in height. And that percentage in _yscale is 13.1%.I just can't figure out the math for this and how to translate it into ActionScript.
View 2 RepliesWe are trying to get a Rectangle that represents the exact* boundary of the text in a TextField.
*Exact as possible.
Take this image:
Using my current knowledge, I can retrieve the blue rectangle above like so:
var textRect:Rectangle = new Rectangle(
field.x,
field.y,
[Code]....
Even if I fill a small section with the color I'm looking for I still get a zero-sized rectangle:
bmd.fillRect(new Rectangle(0, 0, 30, 30), textField.textColor);
i have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
I am trying to put data in a data grid and I fixed the column width. But some of the data is not coming up, it just show the data which comes within the column width. So is there any way to make row height dynamic..........
View 3 RepliesI'm creating a number of text boxs through code. I want to space them out by determining the height (one, two, three, lines of text) and adding 24 pixels space. I highlighted the code in red thats not working the way I want.
Code:
var MytextsA:Array = new Array("12345123451234512345123451234512", "secondElement", "thirdElement", "fourth");
var Args:Array = new Array("First", "second", "thirdt", "fourth4");
[code]...
Using the flash authoring tool, I want to resize a dynamic textfield to a particular height.However, it will not allow me to size the textfield smaller than a height that will fit all of the (multiline) text. How can I override this and make the height smaller so I can use scrollbars?
View 5 RepliesswfObject embed has the following signature,swfobject.embedSWF(swfUrlStr, replaceElemIdStr, widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj, parObj, attObj, callbackFn)with width and heigth required attributes,What can I do to signify dynamic height and width.
View 4 RepliesIs there a way to set the stage width and height using actionscript, the same way you might set it using the "size" button in the document properties panel?
View 9 RepliesI'm creating a number of text boxs through code. I want to space them out by determining the height (one, two, three, lines of text) and adding 24 pixels space. I highlighted the code in red thats not working the way I want. What other techniques could I use to accomplish this?
Code:
var MytextsA:Array = new Array("12345123451234512345123451234512", "secondElement", "thirdElement", "fourth");
var Args:Array = new Array("First", "second", "thirdt", "fourth4");[code].......
I have just come up with this idea of passing in strings into a textbox. The problem is having the height automatically adjust depending on how long the string is. So I have set width for my textbox, but I want the height to change if the string is long enough to wrap.
View 2 RepliesSo I need the text to scroll with the text field object rather than inside the dynamic text field box. To do so I need the textfield box to auto fill a height based on how many lines it has, is there any way to do this or should I draw a static text field instead?
View 3 RepliesI have mc1 which contains code to dynamically generate multiple textfields based on an xml file, but mc1 has nothing physically on its timeline. I want to make another mc, mc2, where its y location is relative to the height of mc1, but when I trace the height of mc1 it returns 0.
Is there any way to get a height based on however many textfields are dynamically loaded into mc1? The height will naturally be varying so I can't just create a variable for a constant height.
I am developing an animated homepage for a Flash-HTML hybrid website, and for the sake of standards, my solution is proving difficult.
Here is the run-down:
For Flash users, HTML page loads a variable-height AS3 Flash movie that will start at 556 pixels high, and after finishing its animation sequence, tween via Actionscript + JavaScript to 250 pixels high.
To kick off this movie sequence -- (below-left) -- I am attempting to set the initial height of the Flash movie via MooTools, so if users do not have Flash or Javascript enabled, they will see the shorter-height image area with alternative image content and HTML content revealed (below-right).
Element.setStyle sets the height just fine until swfObject runs, at which point the movie collapses since I am not specifying a height via CSS. If users do not have Flash, it defaults to the height of a static image.
So here is my question: Does anyone know how to dynamically pass a height variable to swfobject when it is set up to width/height @ 100%? Am I killing myself for no reason trying to work with two page heights?
Image Sequence: Left - Initial Flash movie with HTML navigation below Right - Resized movie at the end of the sequence with HTML nav & content below, looks the same as no-Flash version (static image)
[Code].....
Is it possible to dynamically (not in the project's options) change the dimensions of the stage by using ActionScript 3? I'd want to create a 400x300px loader, but I also want it to load animations that have bigger or smaller dimensions. I would then change the width and height of the loader to make the loaded animations fit well. Is there any way to do that?
View 1 RepliesI'm loading in a small thumbnail into a MovieClip as part of my Thumb class... but when I add it to the stage, the height of the thumbnail is stretched dramatically.I've got my height and width set not only in the Thumb Class, but on the instance of the Thumb that is being added to the stage.
View 3 Replies
