Is it possible? What I'm trying to do is enlarge the hitArea for a selected movieclip on my stage, but only onRollover. I have 5 MCs on my stage acting as buttons of sorts. onRollover of any of the clips, they grow in scale and I'd like the hitArea to do the same so they (MC and hitArea) are proportional.
View 2 RepliesHow to programmatically enlarge a flex 3 button's hitArea. Is there some function that I can override? There is no function in the button class called hitArea. What I have done is, I have created a programmaticskin for a button. The form of the skin consists out four arrows. In between the arrows there is nothing (meaning transparent). Because of the way the skin is shaped, it's difficult to click on the button. The skin has alter the buttons hitArea. What I'm looking for is a way to enlarge the hitArea and alter the hitArea shape in to an square. (the hit area must ofcourse still be invisible).
View 4 RepliesI am trying to set up a cicular movieClip as a hitArea for another, but the circular shape is not detected rather the bounding box of the movieClip. is there any way around it? am i doing something wrong?
Code:
TurretRange_mc.hitArea = TurretActive_mc.TurretHitArea;
TurretRange_mc.hitArea (TurretActive_mc.TurretHitArea);
so far i've tried these two methods.
Is it possible to define a hitArea without creating a new movieclip? I want to define by using xMin, xMax, yMin, yMax.
View 2 RepliesI want to be able to select a item (image, movieclip etc) that has been added to the stage in Flash and access its file name.
So if I drag a image called 'imageOne.png' onto the stage, I want to be able to access its name, 'imageOne.png', and pass it to a Extension for Flash that I'm building. I know I can get details from the library, but not from the items selected on the stage.
Can anyone tell me how to access this information using JSFL.
i want to do a simple function and incorpore it into every mc in my flash movie.In mx, i use prototype, but in mx2004, you cannot use it.how would you assign a function to selected mc's on the stage.[code]how can i do the same in as2 using class or subclass ?
View 4 RepliesIf I create a Movie Clip and assign a child Movie Clip as the hit area using this.hitArea = this.mcClipName; is there a way for me to disable that hit area? For instance, mcButton is a button. When I click mcButton, it triggers a function that reveals other content in my movie. I don't want them to be able to click that button again unless they close the new content (using another button that appears with the new content).
View 3 Repliesis there a way to assign a dynamically created movie clip the hitarea of a PNG file that is loaded into it via actionscript, basically creating a none square/circle hitarea that is a mask of the bitmap image.
View 1 RepliesI have 3 movieclips as windows on my stage. I would like to navigate between them to attach objects to those 3 movieclips. My question is: How can I tell flash which is a currently selected movieclip...? So that the to be attached object goes and sits in the currently selected widow/movieclip?
View 2 RepliesI'm working on a spider solitaire game and I need a way to bring cards out of their parent column and on to the main stage when they are selected. Here's my current code:
[Code]...
However, the above gives me an error on the stage.addChild line. "1118: Implicit coercion of a value with static type Object to a possible unrelated type flash.display: DisplayObject."
I am embedding swf files into flex and no matter what button I use, mine or one of the library swf's that comes with Flash, the hitarea shifts upwards to the top 10 pixels of the button and up from there outside the button area.
View 0 RepliesI'm trying to do a motion tween on a movieclip that is selected from an array via the following code:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var toMove;
[code]...
unfortunatly it doesn't seem to be moving the movieclip, nothing happens. If I change toMove to a static name it'll detect it and work properly.
'tf' is the instance name of the textfield inside a series of movieclips (_root.gm_mc.tfP1.tf, _root.gm_mc.tfP2.tf, .... _root.gm_mc.tfP99.tf). How do I make the selected movieclip active? and make the following onRelease action work only for the selected?
[Code]...
Im building a game, where the user has several images as movieclips. He can drag them to an area of the stage, and selecting them, he could rotate it. Does anybody knows some tutorials on hoe to start?
View 2 RepliesIs there a way to access the child of a selected movieClip in JSFL.
ie i can access the selected movieClip using fl.getDocumentDOM().selection[i]. Now i also want to access the child of this movieClip.
My aim is to give instance name to all the movieClip in an FLA
Flash CS4
AS2
RadioButton Component
I want to remove the so called "HitBox/HitArea" on the RadioButton component - I don't want the user to be able to click anywhere else except the button - and I don't want to just resize the hit area so it's as big as the button (the hit area is a square, and my button is a circle)... can this be done? or does the button absolutely depend on hit area? Part of my reason for asking this, is when I publish my .swf with the radiobutton - the hitarea is displaying as a big white rectangle that is covering the button and part of the text up... why is this?
I have a grid of many 10x10 pixel squares separated only by a pixel line. When the user rolls over the sprite, it grows, animating to about 4 times its size--to around 40x40 pixels. The sprite stays large while the mouse is over the sprite, but if the user wants to rollover the neighboring sprite it is obscured by this sprite and its larger size.
Is it possible to shrink the size of the hit area so that even though the sprite grows in size the mouse can still access or trigger the neighboring sprites underneath--to the right, left, top, bottom? I thought about using Mouse_move, but wasn't sure if that would fire off too many events.
I read the following posts. However, my hitArea needs to be the same size or just slightly larger than the original 10x10 pixel sprite. I've had little success. [code]...
I am trying to customise a listbox component so that when the user clicks on one of the items a movie clip containing 3 buttons appears. My problem is that as I have make the buttons appear whern the item in the listbox is clicked, they are attached to the movie clip and so dont work.I think that one way around this would be to define a seperate hitArea for the listbox item so that this does not interfere with the buttons when they appear
View 2 RepliesGot this weird issue going on today. The hitarea, the 'interactive space' of some of my buttons is off/ distorted. I created several buttons in a class with the pen tool and converted them to Buttons. I added some eventlisteners, but when I tested my Movie, I noticed the interactive space of some buttons was gone or at a different position or not the size I made it.
I made another button using the rectangle tool, and tested again. I noticed the visual button was at the place I put it, but the 'interactive space' was at the bottom right. Whenever I would move over this interactive space with my cursor, the visual button would instantly go to the place the interactive space is. Whenever I move the mouse out of the interactive space, the visual button goes back to its inital place.
Check it: (press start, 2 times the right arrow, then the window, then go to one of the buildings in the landscape and click on it)[URL].. Here you see two rectangle shape buttons. Hover over them, no interactivity. Move the mouse somewhat down to the right, and weirdness happens.
[Code]...
I have a menu with many sub menus. I need to change the color of the selected button and then move on to the sub menu. My menu is horizontal and now it's not obvious the path that you follow.
View 2 RepliesLets say I have a nav with 4 items that are blue. If I click on one, I want it to turn red and stay red to reflect that Im looking at content in that area. If I click another nav item, the previous turns back to blue while the newly selected one turns red. I started to write a function and define a variable but I would like to see an example.
View 3 RepliesIs there any way to disable a few columns for a particular row in flex datagrid?
I have a datagrid with about 10 or more columns, say for example a few column names are: Item Id, Item Name, Item Status and VerifiedState. Initially I want the column Verified State to be disabled.
Now When the value of the column, Item Status is Review Passed for a particular row, I want the column VerifiedState to be enabled and editable. Is that possible in Flex datagrid.
It transpires that there was another Sprite being create and set to alpha=0 which just happend to be at the same Y position as the height of the SimpleButton. This was preventing interaction with the button.
I have a SimpleButton which I am positioning on the stage. I'm doing a variety of things with it buy when I set it's Y position it breaks/alters the hitArea.
var playUp:Bitmap = getBitmap('play_up');
var playDown:Bitmap = getBitmap('play_down');
var Y:Number = 100;
[Code].....
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
I copied this from some other forum because it's explain well "...Let�s say you are loading in an external asset that has an alpha channel, such as a PNG. Now let�s say that you want that asset to act like a button, with rollover and click actions. No problem. No reason you can't do that. But, actually, there is a problem. The hit area for that external asset will be its entire bounding box. Take this octy image for example: Even if you rolled over the top left of the image where it�s totally transparent, it will still trigger rollover actions, which is certainly not ideal and could potentially be very confusing for a user..."
[Code]....
I have been trying to find a tutorial or actionscript on the web which will allow users to" click on an image to enlarge it " when they vew the webpage. Its such a common thing , but haven't had any luck whatsoever .Can someone please refer me to a link/tutorial on how to do this?
View 2 RepliesI'm building my first website in Flash, and it's a porfolio website. I'm trying to set up my portfolio page to show screenshots of my graphic design projects, and when a user clicks on them, it enlarges the photo.
I am looking for it to be done like this website below when you click on their photo samples, it enlarges it, where you can also go to the next photo.
How do I enlarge a pic when on(rollOver)?Current code:
Code:
on (rollOver) {
_root.pop(2, _root.box); (<--not related to enlarging)
setInterval (_root.enlarge(), 1000);[code]....
and how do I make it enlarge equally in all directions (meaning not just to 4th quarter on x,y scale)
I'm using Flash 8. The font in the files is very very small, nearly unreadable. There is no option to enlarge the font, and Ctrl+ does nothing.
View 5 RepliesIs there a way wherein I can enlarge the document property size and force the contents to align to the center? I'm new, so I probably started backwards. I made my file with animation just how I wanted it, then realized it would look better if I put a frame around it. But, when I enlarge the document properties to accommodate the frame, all content, including associated animations, are top flush left. I need them middle center.
View 3 Replies