how to get angle of mouse its very simple.use this Script (copy and past in your file). A sample file which runs only on CS4 is attached.
//Start............................................. .................................................. .................
// Make a line (o-----------------------) and take its left side as center named 'mcArrow'
mcArrow._x = mcArrow._y =200;
[code]....
i have a movie clip that follows my mouse to create a fading line.the thing is that i want that movie clip to change its angle according to the mouse movement.Right now the mocie clip is kind of changing its orientation but it's also gettin cray and is not fluent.heres the code of the part that draws the mouse
private function drawMouseLine(e:MouseEvent):void[code].........
ok so i have been trying to detect the mouse angle.. kinda figuring it out on my own to learn new stuff and get a better understanding of actionscript, but ive kinda run into a problem i cant figure out.ere is the range of angles i get
Code:
0
|
[code]....
I can't work out how to do this, but this is what I have so far..
onClipEvent (enterFrame) {
radians = Math.atan2(_root._ymouse-this._y, _root._xmouse-this._x);
degrees = (radians/Math.PI)*180;
_rotation = degrees;
}
How would I make it so that it can only point between 0 and 90 degrees?
What code would I apply to a movie clip to make it rotate on one end according to the angle (location) of the mouse.
View 6 Repliesso i have a movieclip with this script on it (this makes my movieclip rotates)
ActionScript Code:
onClipEvent(enterFrame){
angle = (Math.atan2(_root._ymouse-_y,_root._xmouse-_x)*180/Math.PI);
[Code]....
Now, i have (let's say) 30 frames inside this movieclip, and i wan't it to change is current frame depending on the angle of the mouse (example, if i point my mouse to the right, the mc goes to frame 30, if i point my mouse a little up, the mc goes to to frame 27, if i point my mouse all to the left the mc goes to frame 15... etc...)
Basically the movieclip should change it's frame depending on the mouse angle,
By the way, i don't really wan't the moviecliip to rotate (like it's doing now) i want it to change it's frame only...)
I have a circle with 8 dots around the edge of it. Based on the center of the circle and the mouse's location, I want the dot that the mouse is closest to, to get bigger. I've got this so far ActionScript Code: angle = Math.atan2(rt.mouseY - y, rt.mouseX - x); But I'm getting some weird quadrant values returned that are between -3 and 3. Is there a way to know which degree out of a 360 circle my mouse is at in regards to the center of the circle?
View 4 RepliesHow to keep a MC a certain distance from the mouse cursor regardless of angle?
View 10 RepliesHow can I calculate the angle of a 3d object based on the mouse speed?I want to change the rotationZ state based on the mouse position.
View 0 RepliesDoes anyone know the code for finding the global positioning of X & Y co-ordinates of a click of a button which is constantly rotating, and then secondly the code for when you click on the button it displays a movie clip on top of it -(position of x & y when clicked) at the angle that you clicked it,so underneath the buttons are still rotating so other people can click them where they are?
to explain the context, I'm trying to design a mock up of a circular interactive table Dynamically placing movie clip at the angle and global position of a mouse click (button) which is constantly rotating.when someone comes up to it and clicks on one of the buttons that are moving, it reads where the person clicked it and opens up a new box (movie clip) where they clicked it (at the angle) so its not upside down if you are at the top.
I've included my .fla file which shows the four buttons moving and a little diagram explaining what I'm trying to do.
Does anyone know the code for finding the global positioning of X & Y co-ordinates of a click of a button which is constantly rotating, and then secondly the code for when you click on the button it displays a movie clip on top of it -(position of x & y when clicked) at the angle that you clicked it, so underneath the buttons are still rotating so other people can click them where they are?
I'm trying to design a mock up of a circular interactive table when someone comes up to it and clicks on one of the buttons that are moving, it reads where the person clicked it and opens up a new box (movie clip) where they clicked it (at the angle) so its not upside down if you are at the top.
I've included my .fla file which shows the four buttons moving and a little diagram
explaining what I'm trying to do.
Ive made this rotation with AS. But Id like to make the bar to move from angle A to angle B smoothly.
How can I do this?
Does anyone know the code for finding the global positioning of X & Y co-ordinates of a click of a button which is constantly rotating, and then secondly the code for when you click on the button it displays a movie clip on top of it -(position of x & y when clicked) at the angle that you clicked it (so underneath the buttons are still rotating so other people can click them where they are)to explain the context, I'm trying to design a mock up of a circular interactive table when someone comes up to it and clicks on one of the buttons that are moving, it reads where the person clicked it and opens up a new box (movie clip) where they clicked it (at the angle) so its not upside down if you are at the topI've included my .fla file which shows the four buttons moving and a little diagramexplaining what I'm trying to do.
View 5 RepliesI'm using Flash CS4 Pro.In Motion Editor, the way that the blur works, it allows you to blur an object on X and/or Y axis.That means you blur horizontaly or/and verticaly.I would like to make a blur motion at another angle, by example 30 degree.
View 1 RepliesI know a matrix [x scale, y skew, x skew, y scale, trans x, trans y], and would like to get the angle in degrees.
View 2 Repliessay I have two points: 0,0 & 1,-1If i were to get the angle between these, it should return 45.But the function i have created below returns -45, and If i give it the points 0,0 & 1,1 it returns 45.
ActionScript Code:
function point_direction(x1:Number, y1:Number, x2:Number, y2:Number):Number
{
[code].....
I have a carousel built and it works fine, but there is an angle on it that I want to get rid of. When the images move along the carousel, I want them to always stay the same on the X axis. Here is the code, I have tried mangling it in every possible combination, but it is outside my AS3 knowledge on how to get the angle changed.
import mx.utils.Delegate;
var numOfItems:Number;
var radiusX:Number = 1150;
var radiusY:Number = 50;
var centerX:Number = Stage.width / 2;
var centerY:Number = Stage.height / 6;
var speed:Number = 0.002;
[Code] .....
I'm at a bit of a coders block, and I'm sure it's quite simple. I tried using the following:Code:((angle-180)%360) + 180But for angles < 180 degrees, it works just fine, but after that it get's a little funny. I know why it's doing that, I'm just looking for a way to fix it.
View 2 Repliestake that same input text box and rotate it on an angle. preview. my type cursor shows up over it but it won't let me type anything int he box (or it if it typing, it's not showing up... which is half of the point).
View 5 RepliesI have the xspeed and yspeed of a round ball, xspeed is distance ball moves to the right each frame and yspeed distance ball moves down each frame.I have 3 different gradients of slopes, one is at 15 degrees off the horizontal.How can I calculate the xspeed and yspeed of the ball after a collision with, for instance, the 15 degree slope.
View 2 RepliesI am trying to retrieve the opposite radian angle after I have retrieve a radian angle from another calculation. This is using AS3
View 2 RepliesI need to limit an angle so it fits into a segment. I have drawn and links to a diagram below to better describe what I am after. I am trying to calculate this for a computer program, where I have an angle (slope), and a point (the mouse pointer). The distance does not matter to me, just the angles. If the point is within b1 (green area) then that's fine. But if the point is within b2 or b3 (red or orange) areas, then the angle should snap back to the limit of the green area (along the line s).
The main problem I am having in figuring this out, is snapping the angle to the correct side e.g. If the point is in the red area, then the angle should snap to the angle s on the red side and vice versa. I am also having trouble because s could be any angle, so I am being tripped up because I can't just do something like this:
[Code]...
I know 3D rotation is well documented on SO and many other sites, but despite reading countless explanations I still haven't figured out where I'm going wrong. My background is in art and design, not math and programming, and I'm never really certain if my angle of attack (no pun intended) is the right one. Rather than paste a patchwork of my dismal code, I'm including an image describing my problem. What I'd really like is a step-by-step worded breakdown of how to solve it. Pseudo code is useful, but I will learn more if someone will just aim me in the right direction or point out common pitfalls.
[Code]...
I'd like my text to be positioned on a 45 degree angle. Is there an easy way to do that? (In the worst case, I could always make a png out of the text). But, I hope that there's away to do it in Flex. I don't need an animated effect.
var angleText:Text= new Text;
angleText:Text.text = "My text is angled!"
angleText:Text.x= 200;
angleText:Text.y= 300;
I have this code :
var a:Apoint = new Apoint();
a.x =0; a.y=200;
addChild(a);
var b:Bpoint = new Bpoint();
b.x =275; b.y=100;
[Code]...
I have a method that takes a "distance" and "angle" parameter. How can I take the angle parameter to get x and y values, and incorporate the distance into that?
I am assuming that I would have to do something with a right angle triangle.
How can change the angle of a premade BevelFilter with AS3.0? (made in the Flash interface, not generated by ActionScript). I tried doing:
ActionScript Code:
myObj.filters[0].angle = 225;
But it doesn't seem to change not even when I trace the value out. When I trace myObj.filters[0] I get returned [object BevelFilter], meaning that the filter does exist.
i am following a tutorial from a book, Learning Actionscript 3.0, A Beginners Guide, where it discusses how to move an object in an agle. I have managed to get the app working fine, but i'm tryin to test it out in different angles but everytime i change it seems to go into the same angle.[code]Can somebody tell me why for everytime i changed the value of the degrees, it does not updat the movement of the ball please
View 3 RepliesI have a code, that draws a horizontal line, then it turns into a slope, and at the end of the slope it draws a circle. Here's a code:
Code:
var xspeed:Number = 1; // defines increments for x of slope
var yspeed:Number = 2; // defines increments for y of slope
var hspeed:Number = 5; // horizontal line increments
[Code]....
Create document 800x700 and put this code into main timeline. Now test movie As you can see, everything works great. But there is a problem. The circle is being drawn at 0 degree angle. But I want the circle to match the angle of the slope, so it looks like the slope and the circle are both at the same angle.
I have a function that calculates the angle between two objects (player and obj):
ActionScript Code:
private function GetAngleToPlayer():int
{
var player:* = GameHandler.instance.player;
[Code]....
It's not working as intended, for some reason I actually had to add the + 90 at the return statement for it to work.