i am trying to get the width of a movie i am loading.so i load my movie:
PHP Code:
load_container.loadMovie(this.mySWF);
and then try to trace the width:
PHP Code:
trace(load_container._width);
but it comes out as 0?
is it possible to get the width of a loaded movie? for example:-
Code:
_root.createEmptyMovieClip("pic", 1);
_root.pic.loadMovieClip("pic.swf");
trace(_root.pic._width);
From the code above, my trace outputs (0), ignoring the width of the loaded pic.swf, has anyone ever encountered this or a way around it?
I am loading several movies into a main movie. I'm using moviecliploader class.loadMovie with a listener object.On LoadInit sets the dimensions and position of the loaded movie.With one of the movies this works fine, but with the other, as soon as I set the width, the movie disappears and on tracing the width following setting it it turns out to be 0.I've just returned to actionscript after a month and I have a memory like a sieve. I'm sure I remember this happening before but I can't remember what I did.
View 1 RepliesI need to get some parameters of a movie adding an as3 code to the beginning. As the code will be inserted in many movies, I need it to be 'general' without any reference to the names of the clipsIn particular, I need to retrieve mouse coordinates and the real movie width. For real movie width I mean the width to whom are referred the mouse event stageX and stageY.For example in this movie http:[url]... the width I'm talking about is the white frame. In fact if you use
ActionScript Code:
stage.addEventListenere(MouseEvent.CLICK,func);
function foo(e:MouseEvent):void[code]....
to get coordinates onclick and you click on the top-left corner of the white layer you'll get 0-0 or similar values.I tried to get that relative width using
ActionScript Code:
stage.stageWidth
but this returns me just the object width (so 100% of my page in the previous example) while I need only the white part width.how can I do this without using any name and referring just to the stage of my scene?
I have about 12 dates that scroll in when a certain date button is pressed.For example: 1976, 19991, 2001 etc.Each section is abut 941 pixels wide.So, If I have 10 dates, that's about 9,000 pixels wide.
View 1 RepliesBasically I have this portfolio website with 6 tabs. I am trying to make the slides glide from left to right.each slide is a movie clip and i have put all six movie clips inside one long movie clip with the instants name of content_mc.The problem is my long move clip is way too long in width I have offset the last slide about 5180px of the 0 position.When I test it and click on the tabs nothing happens and I get this error in the output panel"TypeError: Error #1009: Cannot access a property or method of a null object reference."Here is my action script code.
stop();
//Animate in the profile_mc from bottom to top using the Tween class..//
import fl.transitions.Tween;
[code].....
I have a movie clip on the stage. When I click on it, the info bar shows its width is 90px.When I test the movie and do a trace( mc._width ) it has a width of 97.1 .
View 1 RepliesI'm trying to load images into a row of images. Each image is a different width. Heres the code so far:
Code:
var xPos:Number = 0;
for (y=0; y<5; y++) {
var container:MovieClip = this.holder.createEmptyMovieClip("picholder"+y,y);
container.loadMovie("mypic.jpg");
container._x = xPos;
xPos += container._width;
}
The problem at the moment is that the container._width property is reading 0 so all the images are loading on top of each other. This is the same with "picholder"+y. If I set the xPos value to say 100 then it works fine. I'm guessing its something to do with the fact that the loadMovie happens after the var container is defined. Whats a way around this?
Also just while I'm posting whats the correct syntax for something like this:container.loadMovie("mypic" + (y) +".jpg");
Trying to do a scroll effect of some images I am loading in from an xml file. Problem is I need to limit the amount of scroll based on the width of the images - the number of images is controlled by the client and can vary. The problem is the actionscript does not seem to be able to detect the width of the combined images - heres the scroll code...
[Code]...
Havs had some erratic behaviour working with super wide MovieClips Is there a limit or is it in my head
View 3 RepliesHow do you change movie width and height using actionscript? (Without changing the size of everything else.)
View 5 RepliesIs there a way to mask a movie clip in a way that alters the width and height of the object? I have a child movie clip that is larger in width so I'm having issues manipulating the width, height and coordinates proportionally of the parent movie clip.
View 4 RepliesI managed to scale a movie clip's width with easing.With this code:
onClipEvent (enterFrame) {
endWidth = 50;
_width += (endWidth-_width)/speed;
[code].....
How can I find the width of an external jpg BEFORE it's been loaded into my movie? I can easily find the width of it AFTER loading by loading it into an empty movie clip and returning the width of this AFTER the jpg has loaded using the _width command. But what I want is to find the width BEFORE loading.I have tried "trace(1.jpg._width);" but this returns undefined, obviously as 1.jpg is not an object from my library, it's an external file. Any other ideas anyone?!
View 1 RepliesSo I'm trying to set the width and height of a movie clip symbol. Initially, on the stage the movie clip is set to w = 400, h = 350. Whenever I load a 400x350 image on the clip (from a button), it looks way too wide. So I tried to fix this by adding setproperties for width and height on the action for the button.
[Code]....
I searched the forums, but couldn't really find anything that matched my specific needs. I have a movie clip symbol that is your character, I also have a movie clip symbol that is named fuel and it represents the fuel you have left. I tried this in your character:
if (Key.isDown(Key.UP)) {
yspeed -= ypower;
fuel._width -= 50;
}
as a little bit of code. fuel._width -= 50; is what I'm really interested in. yspeed-= ypower; is just my movement, which works. So why doesn't my fuel width change?
I have published my movie to take up 100% of the width and height of the screen.It takes up the entire height of the screen, but there is about a 10 pixel gap on the left and right side of the movie.
View 2 RepliesMy website is going to have a main wrapper that is set to a max-width property for compatible browsers. It will stretch to 940px across at max. When scaled down I would like the swf to scale proportionately with it. Like an image with width percent applied. The flash movie has the dimensions of 940 × 360 pixels.
I can't seem to figure out the correct attributes to add to the embed tag to get it to do this.I am currently using jquery flash embed, but am open to other options, though this is my ideal.In the example I have set the flash background to black.
When resize the browser window the flash movie doesn't scale proportionately to the div, only the photo does, leaving a blank canvas (black), while the div height stays the same. I can't add a height value in the CSS.How do I make this scale correctly? Adding a noscale param only crops the image. The swf's height doesn't scale also.
i'm using loadmovie() to load a youtube video player inside my flash website but i want to specify the width and height so it can fit my box.This is my code:
vloader.loadMovie("http://www.youtube.com/v/Alw5hs0chj0&hl=fr&fs=1hJ-mPcGtC");
I have an empty CLIP called "vloader" where i load the video player.Note: it is recommended that i get a code in Action script 1.0
I am trying to get the loaded movie "GB.swf" to scale/change width and height onResize. And yes I do want to be loading into a level, not into a mc, with loadMovieNum. Here is the code:
stop();
var depth = 5, x = ((Stage.width/10)*2)+10, y = 160;
var widthscale = ((Stage.width/10)*6)-20;
var heightscale = (Stage.height-170);
_root.onEnterFrame = function() {
this["_level"+depth]._x = x;
this["_level"+depth]._y = y;
[Code] .....
How do I find the total maximum width and height of a movie clip with respect to every frame of that movie clip?
So for instance if the movie clip was circles of radius 5 registered at their center at various positions where:
frame 1:circle.x=-30
frame 2:circle.x=0
frame 3:circle.x=30
The total maximum width of movie clip would be 30--30+5+5=70.
Is it possible to set the stage height and width of your movie externally via Javascript?For example, I created a very simple .flv player that can have its video src changed externally, but now I'd like to also set the height and width of my stage so if I load in a .flv that is smaller or larger I can have it fit to its size.
View 1 Replieshow to make a movie clip expand in width and height and then stop when it reaches a certain size?
View 1 RepliesHi, is there any way to rotate a movie clip during runtime? Also, do movie clips have a width property that can be accessed with actionscript?
View 2 RepliesI have a text field on the left and a movieclip butted up to the right of the text field. How can I move the movieclips position left or right based on the text fields width?
View 3 RepliesHow can i make a movie clip the same width and height of the stage using actionscript, when the width of the movie isnt known?
View 12 RepliesI am trying to define a flash movie with a fixed width but 100% height. I have the movie setup with an onResize handler. My problem seems to be in the HTML. I can get it to go 100% width and height or have it aligned top left but not centered.
Code:
html, body {
height: 100%;
margin: 0;
[Code]....
I've got a textfield creater that creates a nice textfield when I hover over a moveable button. However, when I click and drag that button around the flash movie, the text field disapears off the edge of the screen if I get to close to the right side. Can I adjust the width of the textfield as the mouse is moving closer to the edge?
View 0 RepliesFor my menu on my page, I want to do things dynamically. For the drop down menu, I want to have a box around the link when moused over, that changes depending on the number of characters that are going to be placed on it.
[URL]
See how the "tab" around team is smaller than the menu? But GRAPHICS will be larger, and so on.
I'm parsing an XML file to pull in the data for the menu, so I want to handle this portion dynamically as well.
I am trying to make a Grid that is equal to the width and the height of the flash movie. I have a movieclip called box which is 30x30, and want it to repead along the x to form columns and along the y to form rows so that it makes a big rectangle of smaller squares. For some reason it looks like this:
[Code].....