I currently have a main swf that in the first frame calls and external swf. On this external swf there is an "agree" to terms button. when that is clicked i need to go to frame 2 of the parent swf. this is the code i have attached to the button:
[Code]...
I have a parent swf which loads many child swfs (though only one is displayed at a time). My intention was to use the loaded SWFs document class to retrieve an array of objects to be assigned a tab index, combine this with the parent's own array of objects and apply sequential tab indices to them all. But what happens is actually that the parent's objects are assigned an index, but the external swf is unaffected. In fact, the external swf retains its automatic tab indexing, when I would expect that having set a value for InteractiveObject.tabIndex, automatic tab indexing would be disabled.
I've seen similar tales elsewhere. Most posts I've read are wanting to load an external swf, give it focus and loop through those objects, then close the swf and return to looping through the parent. However I would like loop through all objects as one. including manipulating the focus manager(s), and basically fiddling with every tab-related property I know.
I've struggled with this for a long time and have thrown in the towel. How the heck do you climb the ladder, then go back down again into another clip?
View 2 Repliesi am relatively new to AS3. I want to know how to gotoAndPlay back to scene1/parent to play frame there. I did they type casting but keep getting error Type Coercion failed: cannot convert flash.display::Stage@2e793089 to flash.display.MovieClip. at test2_fla::backgroundC_13/fl_ClickToGoToAndPlayFromFrame() Try this, create an empty AS3, create 2 layers, action and page. Create a button in page layer at frame1 and add title "home". Then press F6 at frame 5. Next, while on frame 5, select the button and convert it to movieclip, name it "background". Instance name "background" too.
Double click the background at the library, change the "home" to "Page2" Then at action, at frame 5, insert blank keyframe, and f9. In the action menu, type : stage.addChildAt(background,0). Next, go to frame 10 in action, insert a blank keyframe and add action: stop(); In your library, double click the movie clip again and select the button and add an event listener to go back to frame 1 of parent. This is where im stuck.
I'm trying to understand how to make referrences from one movie clip to another where one has "loaded" the other. I'm not seeing how to relate the two.keep in mind that I've just gotten comfortable with spittin things up and loading them from external swfs, etc.Lets say that I have a main.swf with a set of 3 buttons(self managed MovieClips actually) that each dynamically load 3 swfs with individual content The first of these sub movie clips(e.g. web.swff) has a set off say 3 thumbnails. I want to be able to have these thumbnails invoke the actions of the 3 buttons up in the main calling movie but I am not clear how to go about calling these functions when they are not in the same scope as the main move. I keep thinking that if I had these thumbnails in a clip within my main.but I still hit this same issue of making a correct reference.This is just a current example. If there is a simpler or better way to explain this kind of communication feel frer to ignore this example or tell me to just go read a tutorial somewhere
// snippet from main.flafunction click_web( e ) { var chl_mc:MovieClip = my_lc.add_content("web.swf");}
function click_motion( e ) { my_lc.add_content("motion.swf");}
[code].....
I'm having trouble with Matrix Transforms in Flex.
I have a Flex Canvas with nothing but an Image in it, like so.
<mx:Canvas>
<mx:Image id="img" source="/some/Url" />
</mx:Canvas>
[Code].....
[code]All clips are squared.Ok, on the PlayerPlane, there are little soldiers, which have hotkeys. The effect I'm trying to create is I want to position the GameStage so that the currently selected soldier appears in the center of the GameClicker clip.The GameStage is movable by the player (to scan other areas of the map)by holding the CTRL key, so it's easy to kinda lose track of where your players are.I have tried using localTo Global and globalToLocal techniques, but I think I'm lost on the actual math of getting the GameStage to move the correct distance so that the selected soldier is centered to the GameClicker.[code]
View 2 RepliesI got a "preloader" that creates an movieclip and loads an SWF. Now in the loaded SWF i want a close button to go back to the "preloader". The preloader isn't an actuall preloader but some sort of mainclip.Now i tried this:removeChild(MovieClip(e.currentTarget).parent.pare nt.parent)But i get error:ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.at flash.display::DisplayObjectContainer/removeChild()at MethodInfo-6()
View 1 RepliesI'm currently making a platform game and when the player shoots i want to add the bullets to the stage. The players gun class is in charge of adding bullets. The "players gun" is a child of "players gun holder" which is a child of "player" which is a child of the stage. is there a better or more dynamic way for the "players gun" to add bullets to the stage rather than using parent.parent.parent.addChild (bullet);
View 2 RepliesI have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 RepliesI have a project (see attached) where I need to have the folders seem like they are floating in space, and I need the best way to make it so when you click on a back folder, it slides off the screen and come back in front of all the folders.
View 2 RepliesAnyways I am using action script 3.0 and I created multiple layers using just one scene. I created a layer with lables on them to mark where I want my buttons to point to and go to. I have the stop (); on the first frame. And I made my buttons mostly interactive with movie symbols and tweens.My first scene I have 2 doors, the user can pick which door to go to and it takes them into a different path.I made the buttons that are clicked to go forward, and then I tried to make an invisible button on the button edge of the scene to go backwards However, the PROBLEM is when I click my button to go backwards I am stuck on the first page and can't move forward.
function gotoOne(evt:Event):void{ gotoAndStop("one")}backbutton1.addEventListener("click",gotoOne);
function gotoFour(evt:Event):void{
[code].....
if I add a clip to the stage as a child and remove the parent and set the parent equal to null, does the child get collected and removed from memory? What if the child has an image loaded into it as its child?
In my application I'm loading a series of png images as overlays that can be tinted for customizing in this app. When I trace my memory, the basic app idles at 64,000 k. The exact second I load those overlay images it goes up to 205,000k. If I remove those clips and "clear" the stage I should go back down to 64,000 k if everything is removed and collected correctly, right? It's not, it's hanging at 215,000 k. Are my images being cached and that is the reason for the memory staying up? If so, how do I prevent that. Or upon removing the parent of the image how can I un-cache the image.
If a user switches between models and loads several different items then the application actually crashes the Flash environment because of too much memory usage. It also does the same to browsers.
I am trying to access a function that is on my document class for my AS3 project, from a nested class. That is, the Document Class calls Class A which then calls Class B. So I am trying to access a function from Class B, I am trying to use MovieClip(parent).function(); but I am getting error 1120. The MovieClip(parent) (fixed to reflect my document class, etc) works when I try it from other classes but not from this nested class.
View 9 RepliesSimple drag and drop application where mc is dragged out of one parent mc and dropped into another parent mc.All works OK until I added 2 text boxes to the mc's -- one is a non-selectable dynamic text box (a label) which is set by the code, the other is selectable input text that the user can amend.
Finger cursor disappears when user hovers over the section of the mc that contains the text fields (even non-selectable text??) When the user trys to drag the mc by inadvertantly click-dragging anywhere within both text areas it causes this error: TypeError: Error #1034: Type Coercion failed: cannot convert flash.text::TextField@2374a381 to flash.display. MovieClip (same error appears for both text boxes)
The input text box may confuse the user - how do they sometimes click to drag and sometimes click to amend? I need to create an overlay area within the mc that is click-detected for the drag? Here's the relevant bits of code:
var itemArray:Array = [
{iname:"police",ititle:"POLICE OFFICER"},
{iname:"insurance_assessor",ititle:"INSURANCE ASSESSOR"},[code].............
I have been using:
yourbutton.addEventListener(MouseEvent.CLICK,f);
function f(e:Event):void{
Loader(this.parent).load(new URLRequest("newswf.swf"));
}
which was suggested to me in a different post to target the parent loader class, however i now no longer can reference my preloader in the parent swf (extract from the parent swf):
[Code]...
I have a GUI using Flex. I have a condition like i need to execute some command line arguments in the local machine and get the results back or output back to a textbox area. How can i do a button on submit, execute command in the local machine and return the output?Command to execute example:
echo logfile.log | grep username
Code:
button1.onRelease = function ()
{
// in this computer, it will now run a command, please wait.
}
I am working on a having external swfs get loaded into the main swf one by one from an array.I can get the first one to load, but it just keeps on playing the first item in the array over and over, instead of loading the next movie. I have a container on my stage, cleverly named "container" and I am using AS2 and loadMovie.
I am guessing my conditon on my if statement is off, but I am not sure how to tell the onEnterFrame to check the currentframe of the loaded swf and not the container itself. I might be way off, but in my mind I feel like this mostly makes sense, but knowing Flash it is probably not nearly enough coding.I might also add this won't be running on the web, so I don't need to worry about preloading swfs since it will be running directly off a PC onto a screen in our office.Here is my code:
Code:
var myClips:Array = ["movie1.swf", "movie2.swf", "movie3.swf", "white_logo.swf"];
var i:Number = 0;
_root.container.onEnterFrame = function() {[code].....
I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other.
right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
I have some knowledge of Flash, but not enough obviously. Right now I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other. right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
View 1 Repliesi want to know how we can make back button in flash to go back to page same like browser back button.
View 1 RepliesIn my apps, i would like to:
1)have a pop-up menu when a button is touched, then ok to close but still in the same page as it is
2)invoke the popup menu by using samsung's "MENU keycode",then ok to return the same page as it is
3)having the user to swipe 5 images to view them, left image as 1st and 5th image as last image with smooth transitions
4)and also using the "BACK keycode" to go back to previous page
trying to on mouse over set the parent of the moused over text field to the highest depth child of its parent i tried both of these: [code] private function
[Code]...
i want to pass the variable from parent to child .How Can i pass the Variable.Here i paste my code.
My Parent Class
public class PlayerStrobe_domaincheck extends Sprite
{
private var myService:NetConnection = new NetConnection();
private var _loader:Loader;
[Code]....
I cannot use the following in my ActionScript due to conflicts with the host application:
_level0
_root
_parent references
On a pop-up box I have a close button with an absolute reference: closeBtn.onRelease = function{ unloadMovie("_level0.Page_1.holderBox");} Is there another way to make this work without using _level0 or _parent? I've read that it is possible to use a global variable on the main timeline and ref that, but cannot get that to work.
I am trying to make a calculator where a user can select from a list of items. If a user clicks say "ITEM1", it should add the item to a "CONTAINER_MC". The problem i have is all my data is set inside an array containing names and prices like the code below.
[Code]...
Here is a working script to drag drop a ball from the stage into another target mc:
ball.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
stage.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void{ [code]...
It works well but I'm new to AS3 and I am having difficulty amending this script to drag the ball out of a parent mc (instead of the stage) and onto another mc (the target mc). To explain: imagine a ball, a box, a tri, + more shapes all within a scrolling mc (initial parent), the user scrolls to select a shape, then drag-drops onto a target mc on the stage.The scrolling is no problem, but how would you amend the script above so that the ball can start inside a parent mc rather than on the stage itself?
I want to place an object either directly on stage or in some other movieClip but I need to read parent height to align it properly from the bottom.I thought I could use this and it will work for both the stage and the movieClip and I could get away with one line of code:
Code:
trace(parent);
//[Object Stage]
trace(parent.height);
but this doesnt work for stage, I need to use this:
Code:
trace(parent.stageHeight);
which is the same as this: so obviusly I need to ask first whether the parent is the stage, so I can find the height...So what is parent.height actually outputting?
I got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.[code]Sprite2 is a rectangle. When I rotate it, of course, the height of its parent, SpriteP, GROWS. But I would expect that height to go back to what it should be when I'm removing Sprite2!And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200.
View 10 Repliesi am slightly confused about the parent and child relationship. lets assume we have several different instances, what would be difference of adding them all as children of the stage and creating a parent-child hierarchy between them(other than the access path).
View 5 Replies