ActionScript 2.0 :: Integrate Swap Depths With Map Scrolling?
Jun 25, 2010
I'm trying to find a way to integrate swap depths with map scrolling. Here is my current code:
SWF:
[URL]
Code:
var mapItem:Array = new Array(_root.tree1, _root.building1, _root.keith,_root.shinru);
mapControl = function () {
_root.player.swapDepths(_root.player._y);
[code]....
The problem lies within the fact that the bounds are pushing away the player too fast for Flash to finish cycling through the array of items.
ts an interactive gallery where when a photo is selected it plays the movie clip and the photo grows to fill the screne. The problem is, since the animations take part within the movie clips and all the movie clips exist on the same layer when they are selected and grow to fill the screne they are being hidden behind all the movieclips infront of it in that layer I know that there is an action to bring movieclips to the highestdepth or to front on click/release but i do not have a clue where to start
*I can't post the file due to the company policy, so I'll do my best to explain. 3 movie clips: slide 1, 2, and 3. Each loads an external image.
Layers (how I have them set up): slide 1 slide 2 slide 3
The slides have a 3d feel, as if they are in the distance. When the user clicks one, the slide(mc) motion-tweens towards the screen, while the other 2 stay back. Obviously, if slide 2 comes towards the screen then slide 1 will be over top of it DUE TO layer structure (above). And of course, 1 & 2 will be over slide 3. To get around this I made a "current" layer over top of all the slide layers. So if I click on slide 2/3 then the tween is up on the "current" layer instead of the "slide 2/3" layer so that it's the highest.
Its been a while since I've done anything in AS3. I was hoping someone could point me in the right direction. I am working on a type of menu where there are 6 cards and on roll over of one of the cards it is brought to the front of the stack. What is the correct method of doing this in AS3? Can someone post a quick example or point me in the right direction to a link that does a good job covering this. I did a quick search and didn't find anything right away that did a good job explaining so I thought I would head over to AS.org
I have a timeline animation various movie clips with play bk and forward controllers for when it is pressed it display (grows, rotates etc), is there anyway of having it so on each layer there is a swap depth command to make whichever button is pressed make the mc's appear at the top?
I have this script I am writing where when someone hovers over a button it displays a popup box until they roll off. I have that function working alright, but I need the movie clips to swap depths, I realize I can do this with setChildIndex but I'm running into a small problem with my children/parent situation. My items are added as such: root > color_mc (blue or red or whatever) > button (this is the hover) I have the event listener added to the button for each color, but I need it so that when the button is rolled over, it takes the color_mc and moves it to the -1 spot. I've tried writing the code a number of ways but can't seem to get it.
Code: function manageMouseOver(event:MouseEvent):void{ var parentClip = event.target.parent.name; parentClip.setChildIndex(parentClip, parentClip.numChildren - 1); event.target.parent.gotoAndPlay(2); }
That code gives me the following error: Error #1069: Property numChildren not found on String and there is no default value.
This should be interesting in explaining what it is i'm looking for. I have multiple buttons on top of each other. And when the hit state on the other side of the screen is rolled over the text will change, which are all overlapping each other. Would swap depths be the best answer for this to bring the one I'm rolling over to the top? And how would I implement it into my for Loop? I'm using the for Loop for my navigation:
is it possible to swap depths for multiple movie clips at the same time? how about swapping for negative depths? or will that kind of thing lead me into probs later?
I have a class definition as file. In it a variable gets passed to into a function (parameters). Then I want to use the name of this function to swapDepths with another movieclip.
Code: private function alphaZero(clipToSwap) { trace(clipToSwap+"+clipToSwap");
I am making a photo gallery with thumbnails and when the mouse rolls over them, they increase in size. Problem: when they increase, they do not cover the other thumbnails completely, since it is only an _xscale percentage increase and not a new movie clip. So you can see all the other thumbnails over the increased photo size. It is a problem of swapping depths I'm sure--but do I have to take off all the thumbnails from the main level and load them dynamically onto different levels in order to be able to swap depths?
I am making a photo gallery with thumbnails and when the mouse rolls over them, they increase in size. Problem: when they increase, they do not cover the other thumbnails completely, since it is only an _xscale percentage increase and not a new movie clip. So you can see all the other thumbnails over the increased photo size. It is a problem of swapping depths I'm sure--but do I have to take off all the thumbnails from the main level and load them dynamically onto different levels in order to be able to swap depths?
I have two main clips with clickable clicks within each. I am using swapDepths on the two main clips in a tab navagation fashion. The problem is that if I click on the space between the nested clips in the top clip it actually is hitting the buttons(movieclips) on the other clip under it. Any suggestions?
Basically i want each of the side scrolling menu to apprear in front when hovered over. I have been breaking my head at this for a while and cant get it
I am trying to remove all instances of the many movie clips located inside a main holder_mc on the stage. I want to remove these on the click of a buttonSomething like this
onRelease() { <<<<<!---- REMOVE ALL MC'S FROM HOLDER_MC ----!> }
Are depths particular to the timeline of the movieclip you refer to it? In other words, let's say you have actionscript to duplicate a movieclip 100 times, each time putting the new one on the next depth. But the code and the movieclip to be duplicated are themselves inside a movie clip. Are those depths inside that movieclip?
So for instance, let's say the parent movieclip lies on the maintime. And on a layer above that is a button. Are those duplicated movieclips going to be visibly above or below the button? A tangible example: I would like to have a smoke/steam effect that uses duplicateMC and depths. But I need the effect to be underneath other movieclips at certain times. Can I just contain the effect inside a movieclip that sits on a layer below other movieclips on the maintimeline? Or do I need to stop the effect and do a swapdepth with whatever the last depth was?
I have 3 containers on stage holding various buttons but these containers are created in seperate Class files....I want to place the 1 container over the top of another container similar to the way I use addChildAt to specify depths.....is there an easy way to do so?
I'm making a website for my business. I want this site to run similar to an OS UI. The first issue I've run into is swapping between "window" MC depths. I'm not quite sure if its just that I need to add a mathematical variable to each one every time it is clicked or how to getDepth of the highest "window" MC in order to put the desired "window" MC above it.
You can download the .fla file <a href="www.dpr.150m.com/images/index.fla">here</a>.
I have some movieclips stacked on top of each other, i've got them swapping depths onRelease, but I want them to swap in opposite direction to what they are now. Check out the link below, basically you click the 2nd or 3rd clip to call infront of the 1st, but i want to click the 1st to send to back and so on.[URL]..
Code as follows. Does anyone know what i would change to reverse the order?
var mcs:Array = new Array (first_mc, second_mc, third_mc); var mc:MovieClip;var total:Number = mcs.length;
I am new to actionscript but I am fairly confident in messing around with it. I have been trying to make a particle engine for two days now and I'm at my wits end.
What's funny is, the particle engine works fine. i have piggy backed off of somebody elses particle engine and modified things to how i need them (And stripped it of a few unnessicary things..) what my problem consists of, is I am trying to make the particles go behind another movie clip. this movie clip is a frame (to make it blend in with the webpage it is displayed on) and it must always stay on top depth no matter what to give that affect.
Are depths particular to the timeline of the movieclip you refer to it? In other words, let's say you have actionscript to duplicate a movieclip 100 times, each time putting the new one on the next depth. But the code and the movieclip to be duplicated are themselves inside a movie clip. Are those depths inside that movieclip? So for instance, let's say the parent movieclip lies on the maintime. And on a layer above that is a button. Are those duplicated movieclips going to be visibly above or below the button?
A tangible example: I would like to have a smoke/steam effect that uses duplicateMC and depths. But I need the effect to be underneath other movieclips at certain times. Can I just contain the effect inside a movieclip that sits on a layer below other movieclips on the maintimeline? Or do I need to stop the effect and do a swapdepth with whatever the last depth was?
I want to swap depths on movieclips overlaying each other but instead of the new clip on rollover just popping up over the other one, i want it to fade into the top.
I'm trying to create a Flash Movie that emulates those poetry magnets. There are a bunch of buttons (magnets) on the stage and when you click on one, you can drag it and place it next to another. That way you can write sentences by moving the buttons (magnets). The only problem is that I want it so when I click on a button (magnet), that it sets it's depth higher than the other ones so it will look realistic, like you are actually moving it over the others insted of over some and under others. Is there anything that I can add to the on (press) handler to change the depth of the movie clip being clicked on?
I'm currently working on side scroller that has an isometric-type perspective (think Double Dragon) and the only thing I could think of to use to manage the depths of the MCs was a bubbleSorting algorithm.
[Code]...
Now this works fine (because I don't have a huge amount of MCs to sort), so I guess this is more of an academic question. As far as I know, bubblesorting is pretty much one of the worst sorting algorithms out there. Has anyone successfully adapted a better one for this purpose? Not trying to get you to post your code as much as just an idea for me to play around with because I'm a geek like that.