ActionScript 2.0 :: LoadMovieNum The Only Command Wich Loads Movies Into Levels?
Aug 22, 2004FMX- Levels_ Q? Is loadMovieNum the only command wich loads movies into levels?
View 1 Replies
Similar Posts:
ActionScript 2.0 :: LoadMovieNum From Different Levels?
May 19, 2008MainMovie = level 0
Navbar = level 10
submovies = level 2
In MainMovie I load my navbar in level 10. Then from the navbar I load the submovies into level 2 (that way, the navigation is always on top)
My questions is, This works find locally, but when i upload the submovies won't appear when clicking the navbuttons.
I have tried relative paths, absolute paths, keeping it in the same folder, etc..
ActionScript 2.0 :: LoadMovieNum - Navigating Between Different Movies
Oct 27, 2010I am working on one very big presentation which is made by around 240 different external .swf in AS2. Although I do not work with AS2, only with AS3 and I didn't make this presentation, I need to make changes to it. So every .swf have navigational buttons which are using this method:
loadMovieNum ("example/example.swf", 0);
to navigate between different movies.
Every swf has also a very annoying music, which I can control by putting a on/off sound button in every .swf, but when the user navigate to another .swf the music start again and the user have to push the on/off button again. Is there a way the player to remember the user choice in previous .swf, so not to have to make this choice every time he navigate between the .swfs?
Until now I control the sound like this:
my_sound = new Sound();
my_sound.attachSound("mix1");
my_sound.start(0, 1000);
ActionScript 2.0 :: Target Loaded Movies Other Than Through LoadMovieNum() Or Creating LocalConnection?
Dec 18, 2006is there a way to target loaded movies other than through loadMovieNum() or creating localConnection?
View 1 RepliesCan't Unload Movies On Two Different Levels
Jun 1, 2009I am having trouble with unload an loading movies. Basically I am loading a movie into a container, which works a charm:
[Code]....
I want to unload them both when a close button is pressed on the third loaded swf? Also, ideally I would like to add that second movie clip into a container, so I can position it correctly, but when I try copying the code I use on the first, it doesn't seem to work...is it to do with the "root" bit perhaps?
IDE :: Loading Movies From Different Levels?
Oct 1, 2009I am creating a presentation which has a main flash and then 3 sub categories to it. Main.fla is nothing but a container to load the other movies into. I could get the the first movie (movie1.swf) to load onto main.swf by using the foll code:
this.createEmptyMovieClip("empty_mc",1);
empty_mc.loadMovie("movie1.swf");
empty_mc.x=0;
empty_mc.y=0;
Now the problem is in movie1.swf the menu is like on the 3rd level, i.e. main stage>menu_mc>menu (where the buttons are).
How can I add a code on level "menu" so that when I click button2 or button3 it loads movie2.swf and movie3.swf respectivley onto the main stage. Makes sense or am making it too confusing..
I want to try this breaking a big movie into smaller parts functionality so that I can understand flash more.
ActionScript 2.0 :: Preload Movies Into Levels?
Jul 21, 2004Is it possible to preload movies into levels just like you can preload them into movieclips? I want my different movies to be loaded into levels so when a button is pressed, they are already loaded and ready to go. This is what I have so far.[code]...
View 4 RepliesActionScript 2.0 :: Loading Movies At Different Levels?
Mar 5, 2004I have a bit of an actionscripting dilema... I am trying load a movie ontop of another movie, so they are at different levels. This I can do ok, its just that when the new movie is launched and sits ontop of the old movie the buttons from the old are still active and interfere with the top movie. I know I could unload the old movie underneath, but my problem is that I want the user to be able to close the top movie to go back to the bottom movie at the place that they left it.!
View 5 RepliesActionScript 2.0 :: Using The Object Mc Properties To Movies Loaded In Levels
Dec 27, 2002i have a movie that has 3 buttons on it..(and there r 7 of these button containing movies being loaded into my main movie...but this is not important in our case i guess.) anyway, each button loads a movie (they r draggable windows) into my main movie, located in different levels (not targets)..the problem is i want to change the alpha and depths of these draggable movies.eg;when i click on a button i want that draggable movie to come forward and set its alpha to 100 and the other two to 30..i could do this by loading the windows in target locations..but i can't do it when i load them in levels..
View 3 RepliesActionScript 2.0 :: Disable Lower Levels Of Movies, But Not Remove?
Aug 18, 2004I want to be able to have a movie in _level0. Then when user clicks on a button it will load another movie to _level5. But I want the lower movie to remain visible bit none of it's ruttons be active. I still notice the cursor turn to a finger when I move around areas that are buttons on layer below.
I have tried loading, then unloading lower level, but there is always a blank gap stutter. I have even tried spacing these load and unload commands apart, but no luck.
I have also turned the back graphic of the current layer in to one giant button, but I don't like the button cursor the whole time.
ActionScript 2.0 :: 4WD Animation - Movies Changing Position Without Command?
Sep 3, 2009Well the animation works okay despite the convoluted timeline. You can select any transfer case mode by moving the slider switch. To shift into neutral from any gear, you press the neutral (N) button. To exit neutral, you press the neutral button again. If you shift into N from either 4WD Auto or 4WD Low, the slider switch jumps to 2WD even though there should be no movement and the animation goes where it is supposed to. It's been a long time since I've been able to work in Flash and it's so close to complete that this is driving me nuts.
View 0 RepliesActionScript 2.0 :: Have A LoadMovie Command That Loads The Swf Depending On The Label Name?
Jun 23, 2009My question is in bold and underlined in the AS below. How can I have a loadMovie command that loads the swf depending on the label name?
AS:
Code:
var menuArray:Array = [{mc:p1, name:"Hardin & Luckett (Marana)", label:"HardinLuckett" },
{mc:p2, name:"Dove Valley", label:"DoveValley" },
{mc:p3, name:"RESUME", label:"resume" },
[code]....
ActionScript 2.0 :: Make Movies Unload Before Movie Corresponding To Button Clicked Loads Up / Doesn't Overlay?
Jun 16, 2003URL...How and where and what do I add to make the movies unload before only the movie corresponding to the button clicked loads up and doesn't overlay?I'm having trouble with the level and all that URL...
View 4 RepliesActionScript 2.0 :: Combobox / Dataset Wich Value Show?
Mar 20, 2008I get data in mycombo thru sql+php+xml and a dataset that binds to this combo.I need 2 value from the combo, but only one must be shown (the label for example) while the second value is needed for feed-back with db!If in the Schema-Tab I add a field "ID" for example everything works fine, but I get the combo with "1, Label" etc.
View 1 RepliesActionScript 2.0 :: Get The Levels Of Volume (peak Levels) Of Multiple Sound?
Jan 9, 2005I believe that my question here is a little hard, or maybe impossible. But here it goes:
How can I, in Flash, get the levels of volume (peak levels) of multiple sound frequencys from an audio file, so that flash would recognize them?
ActionScript 2.0 :: Create A 2d/flat Site Wich Is Larger Than The Normal Screen Size?
Feb 16, 2002What I want is to create a 2d/flat site wich is larger than the normal screen size... for easy viewing I want the site to move related to the mouse movement so that when you drag your mouse left the entire site kinda moves to the right, and by that permits the viewer to browse the site without using the scroll bars. It should work like the example in this link, but not only horizontal, but also vertical...
[Code]...
Actionscript 3.0 :: Buttons Inside External Files Wich Controls Its Timeline Doesn't Work
Apr 11, 2010i'm loading an external swf files in one but the buttons inside the external files wich controls its timeline doesn't work, i'm using AS3 but why it doesn't work.The external file just has some simple actions to move between keyframes in the timeline with buttons goto and some other similar actions
View 4 RepliesFlex :: Command To Pause, Stop And Close Vlc Player From Command Line?
Aug 5, 2010Well i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
Flex :: Caringorm Calling Multiple Command In One Call (Queue Command)?
Mar 2, 2011I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 RepliesActionScript 2.0 :: HTML Loads A Preloader That Then Loads The Actual Flash Movie?
Mar 28, 2009Everything is embedded in an HTML site. The HTML loads a preloader that then loads the actual flash movie. Inside this movie I created a few buttons, inside a scroll bar movie clip. I want the buttons to load a whole new movie inside the same html. The code I'm using in the button is simply:
on(release) {
loadMovie("new_movie.swf", 0);
}
The problem is that it works beautifully in the Flash movie tester but doesn't do anything when tested inside the browser, embedded in the HTML. I think the problem is that the HTML embeds as an object the first movie, the preloader for the menu movie, not the menu movie itself.
ActionScript 2.0 :: When The Xml Menu Loads Swf File Its Structure Loads But Not Its Data?
Feb 23, 2010have this flash xml menu that loads external swf files like this:
Code:
<item title="ABOUT"content_path="http://mysite.com/folder1/folder2/folder3/about.swf"target=""mouse_rollover_color="0xFFFFFF" mouse_rollout_color="0xDDDDDD" />
and I have this swf file with cms that I'd like for this menu to load. Currently the swf file load external text using this code:
Code:
if (contenturl1 ne "") {
loadVariablesNum(contenturl1 + "/" + userid + "/content.txt", 0);[code].....
but when the xml menu loads this swf file its structure loads but not its data.I tried using :
Code:
this._lockroot = true;
in the loading swf main time line but it did not work.I should also mention that the dynamic data that loads onto the swf that is to be loaded by the menu, resides not in it main time line but 4 movie clips deep .I don't know if that makes a difference or not.
ActionScript 1/2 :: Sound Linkage When Loading Movies Into Movies?
Jan 16, 2007I have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :
musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.
However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far
ActionScript 2.0 :: Creating Reverse Rollover Movies Within Movies?
Oct 25, 2005I have been having trouble creating a movie clip with a reverse rollover effect within a movie which has a reverse rollover effect. that sounds confusing
In essence I wish to create a panel that rolls out on rollover and rolls back in reverse when the you rollout. I have done this using this script
[Code]...
However I wish to make movies within this movie that have the same effect on them. But when I create another movie or button within this movie it is not registering on rollover. I guess because the script on the main movie overrides it?
ActionScript 3.0 :: Make An "Ignore Command If" Command?
Mar 30, 2012I'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesLoadMovieNum Swf Keeps Looping
Apr 15, 2009I'm a newbie at Flash...and have a main movie that I would like to load external movies into..for ease of modification of the different areas vice having one large swf.I'm using the loadMovieNum command to load the external swf's just fine. When I play the external swf's by themselves...they play once and stop. When they are loaded into the main movie...they loop.I've placed a "stop();" command at both the frame in the main movie...and also on the line directly after the loadMovideNum line.
View 3 RepliesWhy Swf With Loadmovienum - Cannot Work In Ppt
May 20, 2009I have made a swf that loading another swf fileļ¼it works well alone. When i put it into a powerpoint file using shockwave flash object,it works only one time. When i close the ppt and reopen it, the swf cannot work.
View 1 RepliesProfessional :: LoadMovieNum In AS3?
Jul 5, 2010how to loadMovieNum in AS3?..I know the migration that we should use the Loader type
var lala:Loader = new Loader(new URLRequest("home.swf"));stage.addChild(lala);
something like that?..But my question is if we do LoadMovieNum("home.swf",0); ""lvl 0 > Stage right""its like replace the previous stage with the new stage..whereas the 2 swf have the difference size..when i did with the Loader, thats load covered the previous SWF and the window size didnt resize automatically..
ActionScript 2.0 :: References & Movies Within Movies?
May 24, 2003I am creating a calendar and only one part isnt work. That part is the movie (mc_nav). I have the mc_nav movie on each month's stage. The buttons are named correctly since I used normal modes reference thingy to double check the references. I am trying to have it move to the next frame in the movie, or back, or to the 3rd frame etc. The first section (NAVIGATION BUTTON LINKS) works fine. It is just when I try to navigate on the Scene 1 stage, from a movie within a movie, that the trouble arises. Each of the month movies (mc_sep, mc_oct, etc) have mc_nav placed on them. Then the month movies are placed in Scene 1 on each of their respective frames (mc_sep = 4, mc_oct = 5, etc). When testing the movie and I am sent to any month page, the navigation (mc_nav) wont work. The syntax according to the flash debugger is correct. The action script goes all the way through to the last frame (13) and the stop(); command is set to stop the movie at frame 3 (the splash page).
[Code]...
ActionScript 3.0 :: LoadMovieNum Not Working?
Aug 23, 2009For the past 7 years I have been creating a presentation in CS3 using Flash and ActionScript2. I am using a new plug-in that requires me to use AS3. I basically have about 20 different flash files, and to link all the swf files together I used to use:
stop();
loadMovieNum("gtradial.swf", "1");
When I use this now I receive this error:
1180: Call to a possibly undefined method loadMovieNum.
what I need to add/change to make this work with AS3?
ActionScript 3.0 :: LoadMovieNum() Equivalent?
Mar 1, 2012I'm setting up a multi-lesson game and using it also as an opportunity to make the switch from AS2 to AS3. It's been a bumpy road but I'm getting it but think I've hit a roadblock.Is there an equivalent to the "loadMovieNum()" parameter from AS2? I have been merrily building all the individual games assuming I'd just swap them in and out of the same level so they purge each other as we go.
View 2 Replies