ActionScript 2.0 :: 4WD Animation - Movies Changing Position Without Command?
Sep 3, 2009
Well the animation works okay despite the convoluted timeline. You can select any transfer case mode by moving the slider switch. To shift into neutral from any gear, you press the neutral (N) button. To exit neutral, you press the neutral button again. If you shift into N from either 4WD Auto or 4WD Low, the slider switch jumps to 2WD even though there should be no movement and the animation goes where it is supposed to. It's been a long time since I've been able to work in Flash and it's so close to complete that this is driving me nuts.
View 0 Replies
Similar Posts:
Aug 22, 2004
FMX- Levels_ Q? Is loadMovieNum the only command wich loads movies into levels?
View 1 Replies
Nov 19, 2009
I added a Menu_mc on my stage. Initially, this should be at the center of the stage and when I click on it, it will tween on the upper left corner of the browser. However, when I resize the browser, the Menu_mc goes back to the center of the screen.
I have tried separating a different actionscript file where it is specifically for initialization of the object and another one for resizing. And then when I call it on my main AS file it goes like this:
Code:
// Add the symbols to stage
var Menu_mc = new Menu_MC();
addChild(Menu_mc);
[code]...
But it seems futile.
View 6 Replies
Nov 8, 2010
I've run into a new problem, this time with positioning. I've narrowed down the line that's causing it--"block.y = block.y + block.height;" in SetOfBlocks.shiftDown. When I take it out, no problem. But with it in, instead of just dropping each block down by a block height, the affected blocks sometimes move up, and also often move about randomly within the X axis--although their new positions always keep them lined up with the 'grid', which is to say, within multiples of the block height and widths.
[Code]...
View 3 Replies
Jun 14, 2006
I've used the command attachMovie to add custom movie clips to my flash document but now I want to change the value name (that I defined inside the movie clip as a text) in each movie clip. I found something like :
this[uniqueclipname].value.text = "Name";
But I couldn't use it clearly. Is there an alternative for that? Or is there any wrong part in my code?
View 7 Replies
Aug 10, 2010
Im triyng to use the attachmovie command to load and position a movieclip. It doesn't show anything when playing movie. I'm using Flash MX.
_root.attachMovie("Symbol", "mcp", 0);
_root.mcp._x = 100;
_root.mcp._y = 100;
View 5 Replies
Mar 20, 2008
I have an on(press) command that refreshes advertisements on an HTML page that my .swf is embedded in. When a user clicks on buttons that have the script, the advertisements refresh. I have a page that features a Slideshow Pro slideshow. Because this is a component, I am unable to put this script on the buttons in the slideshow. I am hoping instead, to have the script automatically run every 10-20 seconds. I am using actionscript 2.0 in a Flash CS3 file. Here is the code on the button:
[Code]....
View 1 Replies
Apr 24, 2008
I'm sure you've guys heard of this before, but I have a question about loading movies into movie clips with a playout animation sequence so the transition is better.What I mean is this:I load movie clip 1 into instance Container and I click on another button to load another movie into that instance. How do you play an out animation on the previous movie that's already loaded before the new one loads in? Without the out animation, it just replaces the currently loaded movie instantly without a natural transition
View 2 Replies
Apr 6, 2010
Basically i want to run a loop that will change all of the colours of the movieclip instances.... so i have setup an array:
Code:
var Black_Orbs:Array = Array("info_mc", "name_mc", "lift_mc");
function change()
[code]....
View 4 Replies
Apr 21, 2003
My problem is that if i do an drop-menu-animation and i put it in my button, i can't manage the command LoadMovie, in the primary stage of the site...
What should i do?
View 1 Replies
Mar 24, 2011
im using adobe air for android.
my problem is (for now) i have a sprite with animation (7 frames) and two buttons. One button moves the sprite right at 15 units on mouse down, the other moves him backwards.
two things..
1. When i release the mouse, the sprite stops mid-animation, with 1 foot in the air. how do i get it to complete its cycle after the button has been released?
2. is there a way to flip, horizontally, my sprite so when i click the LEFT arrow, he turns around? Or do i have to mirror the sprites myself as new images?
i cant attach my FLA, but here is my code copy/pasted.
btn_right.addEventListener(MouseEvent.MOUSE_DOWN, onDown);
btn_right.addEventListener(MouseEvent.MOUSE_UP, onUp);
[Code].....
View 2 Replies
Jun 9, 2010
i am looking for a flash/flex component that plays movies that are not .flv but .swf with controllers such as fast forward, stop, play and a timeline.I have a flv player which does the same but some movies I don't want to play bitmap movies but vector for quality reasons ( as movieclips )
View 2 Replies
Feb 20, 2010
I created a simple transparent app for Adobe AIR in Flash. It has not chrome, so now I need to make it draggable. How could this be done?
View 1 Replies
Nov 5, 2010
I am making a dragable map and there are few thing on top of the map(UI). When the map is double clicked it enables drag. But it's changing the index position, basically, it going over the UI. what's the easiest way to control the index position of the map? The click and drag event is controlled in mapZoom class.
this.addEventListener(MouseEvent.MOUSE_DOWN, enableDrag);
public function enableDrag(e:MouseEvent):void
{
this.startDrag();
}
View 1 Replies
Jun 25, 2010
I know I can horizontally flip an image using ActionScript Code: image.scaleX *= 1;
However, this seems to move the left border of the image past its x coordinate.
I would like to make sure that the image stays within the same borders as before and that (x,y) is still the top left corner. Short of wrapping it in another image, is there a way to do that?
View 8 Replies
Feb 11, 2011
i added a vcam in my game but it messes up the x and y position of my moveclips, when i pressed space to shoot fireball, the fireball's position keep changing. Everything is working right before adding the vcam. Does anyone have a solution to this or why does vcam cause this to happen?
View 2 Replies
Oct 2, 2004
how do u make a currently playing song (s1) move to a new spot in the song? s1.position=wure; were wure is the position in milliseconds i want it to be does not seem to work .
s1.stop;
s1.play(wure,0);
does not seem to work either
View 2 Replies
Nov 15, 2011
I want to write a function which removes elements from an array of integers starting from the lowest values without changing the positions of the elements. Programming language is ActionScript3.
[Code]...
I know Array.NUMERIC and Array.DESCENDING would change the position of the elements, but I can't seem to figure out the logic on how to keep their positions.
View 3 Replies
Mar 16, 2012
Is it possible to change the mouse-pointer position in fullscreen. I want my mousepointer never hits the left or right side screen walls.. in case it does so, it resets itself in between somewhere.
A fake mouse pointer using a movieclip, won't solve this problem, because after-all i have to save the mouse pointer from hitting screen-walls.
View 2 Replies
Sep 24, 2008
Im new to flash and doing my best to teach myself.Im using CS3.I've already been working on this project for a while, and I don't know why this is all of the sudden happening.I have a text graphic that I want to create a motion tween with.I created a new layer for it, and drug it to the stage.If I tested the movie at that point, it looked fine and didn't move. If I tried to move the original keyframe, or added a motion tween, it would look fine when I played it on the stage, but when I go to "test movie", its either not on the screen at all, or its in a totally different position.
View 1 Replies
Apr 26, 2011
This is a 2 part question really:
1) I'm trying to change the position of two different MovieClips instances to the same .x position. It works individually, but as soon as I put this code in, it says that it cannot assign it to a non reference value:
ActionScript Code:
coinArray[1].x && coinShadowArray[1].x = -591.5
2) I have a whole load of variables which are all going to different .x positions at the same event trigger - something similar to this, but there's around 30 of them:
ActionScript Code:
object[1].x = -560
object[2].x = 764.45
object[3].x = 700.45
object[4].x = 740.45
View 4 Replies
Jun 8, 2004
I know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
I know the script below is wrong, but would it go something like, this. Would I have to use angle and math or is there a simpler way to achieve this?
onClipEvent (mouseMove)
get x position
get y position[code]......
View 1 Replies
Apr 12, 2008
I got an mc (named "img") on the stage. In order to zoom it, I'm using the following code:
Code:
myZoom = function (myDepth){
if (myDepth == "deep") {
myDepth = 4;
} else if (myDepth == "medium") {
myDepth = 8;
[Code] .....
Problem is, when I release on the mc it changes its original position to X=0,0 Y=0,0 as you can see here. Obviously, I want it to keep its starting position on the stage and zooming in and out from there.
View 2 Replies
Oct 6, 2009
I have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
View 1 Replies
Jul 19, 2010
I've loaded a clip in my main swf and I want to flip it by using scaleX*=-1the problem is that in my clip, the animation is at the center of the stage so when I load it and flip it using scaleX instead of staying at the same place it flips by using the top left corner of the clip as a pivot instead of the center of the animation itselfI could either solve this problem by placing the center of my animation on the point (0,0) in the clip or flip then rearrange the clip's x position inside my main swf...but is there a more effective method?
View 3 Replies
Jun 8, 2004
I know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet.
- I have 5 frames within a MC.
- In this MC there is text saying "center", "left", "right", "up", "down" on each frame.
- All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
onClipEvent (mouseMove)
get x position
get y position
if statement x= > -180 and y=> 0 (something like that)
_root.myMovieClip.gotoAndStop(3)
View 1 Replies
Jan 12, 2009
I have created this tiled animation however I want to sett the coordinates of where it should load on the stage.I am not sure what class I should use 'Point class ?
View 1 Replies
Oct 10, 2008
I am trying to change the position of a movie clip which is acting as a menu and loading other swfs onto the stage. The problem is, is that the movie clip is also animated and when an swf is loaded the movie clip appears underneath the loaded swf. What method I should use to change the hierarchy of this movieclip.
View 2 Replies
Nov 15, 2010
I load an SWF using a simple loader but it changes the main applications x/y position and size.Which loader do I use to load an swf that will maintain the position size of my app?
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.INIT, function handleInit(event:Event):void{
var UIDesigner:UIComponent = new UIComponent();
[code]......
View 3 Replies
Mar 1, 2012
I'm writing a game with Flash CS5/AS 3.0 that tries to simulate depth of field by drawing all the relevant Movie Clips based on their Y position in ascending order, i.e. things lower on the stage overlap things higher on the stage. A MovieClip with a Y position of 10 would therefore need to have a lower index compared to a MovieClip with a Y position of 20, so the second one gets drawn on top of the first.
I wrote a quick and dirty function just to test this. During the trace, I've noticed that the truck's index hits 0 when I go near the top of the stage, but if I go too far up it will completely disappear from the stage. Trace then starts generating this error:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/getChildIndex()
at EICT::Game/ReorganizeDisplayIndexes()
[Code].....
View 2 Replies
