ActionScript 3.0 :: Changing Y Position Results In Random Position
Nov 8, 2010
I've run into a new problem, this time with positioning. I've narrowed down the line that's causing it--"block.y = block.y + block.height;" in SetOfBlocks.shiftDown. When I take it out, no problem. But with it in, instead of just dropping each block down by a block height, the affected blocks sometimes move up, and also often move about randomly within the X axis--although their new positions always keep them lined up with the 'grid', which is to say, within multiples of the block height and widths.
I added a Menu_mc on my stage. Initially, this should be at the center of the stage and when I click on it, it will tween on the upper left corner of the browser. However, when I resize the browser, the Menu_mc goes back to the center of the screen.
I have tried separating a different actionscript file where it is specifically for initialization of the object and another one for resizing. And then when I call it on my main AS file it goes like this:
Code: // Add the symbols to stage var Menu_mc = new Menu_MC(); addChild(Menu_mc);
how to make an actionscript to move punto_mc from current position to random position after release, and then from this new position to mevo to another randon position after release?
What I want is for my mc to slide to a new random x position when it is less than 5 pixels away from its target, it keeps doing this. the problem is for some bloody &*�$(()** reason my random numbers only keep going up!! why is this?? i want to produce random numbers between 1 and 770 - this is my code..
I am using a ScrollPane in my application(viz., instance name is: myScrollPane). When I view the contents of the ScrollPane, it shows them perfectly. My issue is: When I try to view data present inside the ScrollPane, if I move the Vertical-ScrollBar of the ScrollPane to middle(or somewhere from top to down) and then click on Submit button(viz., instance name is: submit_btn), then its Vertical ScrollPosition must be reset from middle(or any position where we leave it before) to top(or initial position). Hence, I need to move the Vertical ScrollPosition of ScrollPane to top (or) initial position. Everytime, I need to refresh the VerticalScrollBar Position when I click on the submit button. How to do it?
I have simple image gallery, where images are placed one next to another and the mask is revealing only one of them. Now I want to tween position of the images, but when I do that the mask is "traveling" alongside with the images..
I am making a dragable map and there are few thing on top of the map(UI). When the map is double clicked it enables drag. But it's changing the index position, basically, it going over the UI. what's the easiest way to control the index position of the map? The click and drag event is controlled in mapZoom class.
this.addEventListener(MouseEvent.MOUSE_DOWN, enableDrag); public function enableDrag(e:MouseEvent):void { this.startDrag(); }
I know I can horizontally flip an image using ActionScript Code: image.scaleX *= 1;
However, this seems to move the left border of the image past its x coordinate.
I would like to make sure that the image stays within the same borders as before and that (x,y) is still the top left corner. Short of wrapping it in another image, is there a way to do that?
i added a vcam in my game but it messes up the x and y position of my moveclips, when i pressed space to shoot fireball, the fireball's position keep changing. Everything is working right before adding the vcam. Does anyone have a solution to this or why does vcam cause this to happen?
how do u make a currently playing song (s1) move to a new spot in the song? s1.position=wure; were wure is the position in milliseconds i want it to be does not seem to work .
So I'm trying my hands on some full browser flash and after reading a couple of tuts I wrote this
Code: #include "mc_tween2.as" Stage.scaleMode = "noScale"; stageListener = new Object();[code]...
The trace's are because it didn't work like I thought it would.Etc the middle movieclip didn't center itself but rather positioned itself seemingly how it pleased so I traced its x position and the var stageXcenter position and like suspected it shows different values.
I wanted to built an enemy that is able to move on stage randomly in xposition and perhaps able to detect my character within the detectable zone and chase after me.. but currently I just wanted to make the enemy move randomly in x-position for starter.
It is my first time making and enemy with AI, but I'm just wasn't sure where to begin, I have used a fairy easy script to animated the movieclip in the beginning but got stucks whenever it reaches 960 or below 0 of the stage
addEventListener(Event.ENTER_FRAME,initGames); function initGames(e:Event):void{ moveEnemy(); }
This doesn't seems to be working cause the amount of it checking whether MC is overlapping is about the amount of MC on stage. how to make it keep checking till everything's fine?
I am having problems with gotoAndStop and mozilla. I am loading an external swf ( which is Flash MX 2004 ) swf. In this swf, there are 200 keys frames. Here, i am using a command gotoAndStop(110). Now after publishing, when I am viewing in IE browsers, I can able to see the 110th keyframe position exactly. But when i am viewing the same html in Mozilla, I am getting random positions. Here am not getting 110th position.
how do can I position around 50 dynamic create movieclips from the library on the stage without overlapping.
I did the random x and y but they end up overlapping, i assume i have to do it with the hitTestObject, but eventually i will have 7 layers with 50mc's on each stage that need to be positioned randomly without overlapping and it will become processor heavy to test these objects.
I want to write a function which removes elements from an array of integers starting from the lowest values without changing the positions of the elements. Programming language is ActionScript3.
[Code]...
I know Array.NUMERIC and Array.DESCENDING would change the position of the elements, but I can't seem to figure out the logic on how to keep their positions.
Is it possible to change the mouse-pointer position in fullscreen. I want my mousepointer never hits the left or right side screen walls.. in case it does so, it resets itself in between somewhere.
A fake mouse pointer using a movieclip, won't solve this problem, because after-all i have to save the mouse pointer from hitting screen-walls.
Im new to flash and doing my best to teach myself.Im using CS3.I've already been working on this project for a while, and I don't know why this is all of the sudden happening.I have a text graphic that I want to create a motion tween with.I created a new layer for it, and drug it to the stage.If I tested the movie at that point, it looked fine and didn't move. If I tried to move the original keyframe, or added a motion tween, it would look fine when I played it on the stage, but when I go to "test movie", its either not on the screen at all, or its in a totally different position.
Well the animation works okay despite the convoluted timeline. You can select any transfer case mode by moving the slider switch. To shift into neutral from any gear, you press the neutral (N) button. To exit neutral, you press the neutral button again. If you shift into N from either 4WD Auto or 4WD Low, the slider switch jumps to 2WD even though there should be no movement and the animation goes where it is supposed to. It's been a long time since I've been able to work in Flash and it's so close to complete that this is driving me nuts.
1) I'm trying to change the position of two different MovieClips instances to the same .x position. It works individually, but as soon as I put this code in, it says that it cannot assign it to a non reference value:
2) I have a whole load of variables which are all going to different .x positions at the same event trigger - something similar to this, but there's around 30 of them:
I got an mc (named "img") on the stage. In order to zoom it, I'm using the following code:
Code: myZoom = function (myDepth){ if (myDepth == "deep") { myDepth = 4; } else if (myDepth == "medium") { myDepth = 8; [Code] .....
Problem is, when I release on the mc it changes its original position to X=0,0 Y=0,0 as you can see here. Obviously, I want it to keep its starting position on the stage and zooming in and out from there.
I have a button symbol on my stage that I want to change size depending on where the mouse is on stage. ie: the y position of the mouse will make the x and y scale change (the symbol should get smaller as the mouse moves up the page and larger as it moves down - as if it is getting closer or further away).
I've loaded a clip in my main swf and I want to flip it by using scaleX*=-1the problem is that in my clip, the animation is at the center of the stage so when I load it and flip it using scaleX instead of staying at the same place it flips by using the top left corner of the clip as a pivot instead of the center of the animation itselfI could either solve this problem by placing the center of my animation on the point (0,0) in the clip or flip then rearrange the clip's x position inside my main swf...but is there a more effective method?
I know this can't be to hard too achieve, but my actionscript skills aren't quite up to it yet. - I have 5 frames within a MC. - In this MC there is text saying "center", "left", "right", "up", "down" on each frame. - All I want to be able to do is make the MC change to frame 3 "right" when my mouse moves to the right of the MC.
onClipEvent (mouseMove) get x position get y position if statement x= > -180 and y=> 0 (something like that) _root.myMovieClip.gotoAndStop(3)
I have a ScrollPane and I want to get and set the scroll bars position (pixel position). For example, if the user changes the scroll bars position and then refreshes the page, we need to take the user at the same point where he was before refresh. For this I need to get the respective scroll bars positions before refresh and then set it to the saved position after load. I have got the positions by hPostion and vPosition but now when I try to save the values back to the same properties after refresh it doent work.
var manTimer:Timer = new Timer(1000,14); manTimer.addEventListener(TimerEvent.TIMER, moveMan); function moveMan(e:TimerEvent):void {[code]....
I just need to make the tween's position relative to it's current position, as opposed to starting at the stage's 0 position then moving the the stage's -40 position. It needs to start at its current position the move -40 from that position.
