c_mc2 = _root.createEmptyMovieClip("main_text", 4);
c_mc2._x = 0;
c_mc2._y = 359;
If i use this method to create an empty clip and then once i am done with the clip i unload the movie which was previously in it, what happens to the clip. Do i have to re-create it if i want to reuse the empty movie clip again with the same name?
OK frame 1 new fla and I type the following code:
[AS]createEmptyMovieClip("clip1",0);
clip1.createEmptyMovieClip("clip2",1);[/AS]
I have tried over and over again to get this to work but it won't! I want to create an empty MC and then create anoth MC within the first!
I am trying to make a photo gallery in as3. I found a tutorial for a scrolling thumbnail panel and found how to convert it to as3.
What I would like to know is how do you get the larger image to display when the user clicks on a thumbnail in the scrolling panel? (I have 8 thumbnails, and 8 larger images).
ActionScript Code:
panel.addEventListener(MouseEvent.MOUSE_OVER, panelOver);
function panelOver(event:MouseEvent):void {
[code]....
How can I create an empty movie clip where I can set It's name plus a number?
View 2 RepliesI am trying to migrate as2 to as3 code.The normal solution to my problem involves using the first parameter of the createEmptyMovieClip() as the name of your movie clip. In several instances I have a dynamic value for this first parameter- so my question is How should I go about doing this?
//my code
function someFunction (){
loader_mc = this.createEmptyMovieClip("text"+value, value);[code]......
I'm new here and it's been a while since I've used AS I'm trying to create a MC inside another MC
[Code]....
The code mostly comes from a tutorial I found where the demo works fine. Just my code seems to not stand up to the test
I am using CS4 and ActionScript 2.0.I am trying to create a photo gallery.I have created 4 different movie clip buttons that reside on the content layer.Each button consists of one image.When the movie clip button is pressed, I want the full size image to appear on the stage next to the buttons.You can see the buttons in the image below.I am trying to create an empty movie clip holder that would reside on the main timeline while the buttons reside on the content layer.I need to get the images to load into the empty movie clip and then unload when the next button is selected?I can't seem to get the buttons to "talk" to the empty movie clip holder.I did manage to create code for an empty movie clip holder within each button, but then I end up with all four images on top of each other.
View 7 RepliesI have a loaded swf via the enpty mc method...the usual. this loaded swf has 3 frames - "off", "slow" and "fast" - so depending on whether the user is on the "presentation" page (lots of stuff going on and needs the external swf to be on the "slow" frame) ok, I have no problem controlling the swf....i can make it go to the frames ok. heres the problem, when the user is NOT on the presentation page, i need the the loaded swf to be on the "fast" frame. heres the code i used but doesn't work as i expected.
[Code]...
I want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
View 5 Replies(Whoops - ALMOST solved - one last issue below!) I've got two buttons, one shared movie clip. The two buttons each load two different movies. All I want to do is TOTALLY CLEAR OUT whatever movie is loaded from one button whenever I press the other to load its cargo into the movie clip.
This seems like it should be so easy to do, but there's always a remnant of the first movie left in this.How do I empty the whole thing while still keeping the shared movie clip (which the two buttons/movies share) in place?
[Code]...
Using the web services panel, I've connected to a web service, but all the method calls will only show the param structures/types - not the result structures/types. To the best of my knowledge, I'm sending the right parameters, in the right structure, but always I get an empty response.The web services panel:
Debugger results (with breakpoint placed just after a response is received):
Where might the problem be?
how to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie
View 5 Replies how to load an swf into an empty clip labeled 'holder' on my main timeline on mouseclick of a button?so far im trying
Code:
button1.addEventListener( MouseEvent.CLICK, onClicked );
function onClicked( e : MouseEvent ):void {
MovieClip(parent.parent.parent).holder.loadMovie("thing.swf");
}
but loadMovie isn't supported..
I tried searching for this, but couldn't find exactly what I am looking for.
I want to create a new instance of a blank movieclip using actionscript and name each instance differently.
trying to make an empty movieclip, but after compile the file i press ctrl+L to see the objects instances on stage, it shows only Level #0: Frame=1. how can I make myMC movieclip???
package {import flash.display.Sprite;import flash.display.MovieClip; public class drawCurve extends Sprite { public function drawCurve() { var myMC:MovieClip= new MovieClip(); addChild(myMC); myMC.name="MC"; }}
[code].....
I have an XML variable with a bit of content and I want to completely overwrite that content.I thought by calling "new XML" that I'd have an empty variable and could replace the content.Is that not the case?If it's not what method would I use to overwrite the variable content?
View 11 RepliesOn frame 1 new fla and I type the following code:
[AS]
createEmptyMovieClip("clip1",0);
clip1.createEmptyMovieClip("clip2",1);
[/AS]
I have tried over and over again to get this to work but it won't! I want to create an empty MC and then create anoth MC within the first!
I have this script to load external swfs to the stage. But I want to load them into a empty clip called "emptymc".I know I need this: MovieClip.addChild(Loader);But not sure where to place it.
Code:
package
{
[code]....
load a .swf into an empty movie clip. I've given the empty movie clip an instance name of "myContainer". This is the code i've got now on a button (which doesn't have an instance name), which doesn't work:
on (press) { myContainer.loadMovie("BVLibrary_Branding.swf");
}
I created a movie clip of a photo gallery that works fine until I test it and get to the frame that the movie clip is on. After doing so, the movie clip stays throughout any other page I click on. I can't get the removeMovieClip function to work.
Here's the code I have:
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 5;
for (i=1; i<=imagesNumber; i++) {
[code]....
I have two images pulling though an empty movie clip, using the actionscript below. I can't seem to figure out how to position both of them, could anybody shed some light on this? I'm using AS3.
[Code]....
[fmx]
related files: 7MB .FLA File
Okay...
At the _root I have an instance using an empty clip named mainPageEmptyClip. Inside of that, are various other movies.
Now, at the _root there is a menu which, when clicked, should access one of the layers within the empty clip's content.
The problem here is that I can't discern what the target would be to actually access the clip. The action worked fine before I implemented the empty clip, but now it won't work any longer.
I've tried using the target tool built into FlashMX, but it doesn't list any of the instances withing mainPageEmptyClip - that's as far as it goes. I've tried entering in what would seem to be the path, based on the instance names of subordinate movies, but it does me no good - I'm continually given the error of Target Not Found.
These are the two options I've tried....
_root.mainPageEmptyClip.gotoAndPlay(351);
_root.mainPageEmptyClip.webLayer.gotoAndPlay(156);
I created an empty movieclip with[code]...
Where in the script can I add the x and y properties for that empty movieclip?
I'm trying to load images into a row of images. Each image is a different width. Heres the code so far:
Code:
var xPos:Number = 0;
for (y=0; y<5; y++) {
var container:MovieClip = this.holder.createEmptyMovieClip("picholder"+y,y);
container.loadMovie("mypic.jpg");
container._x = xPos;
xPos += container._width;
}
The problem at the moment is that the container._width property is reading 0 so all the images are loading on top of each other. This is the same with "picholder"+y. If I set the xPos value to say 100 then it works fine. I'm guessing its something to do with the fact that the loadMovie happens after the var container is defined. Whats a way around this?
Also just while I'm posting whats the correct syntax for something like this:container.loadMovie("mypic" + (y) +".jpg");
wanted to load an swf into an empty movieclipthen modify the empty movieclips xy scale, and xy positionrecall doing something like that b4, and it seemed like a simple enough taskbut for some reason this doesnt seem to wanna obey me at the moment
View 1 RepliesIm trying to animate a set of empty movie clip containers. When I select them and try to apply a motion tween.
View 2 RepliesI created an empty movieclip with:Code:_root.createEmptyMovieClip("container", 1);Where in the script can I add the x and y properties for that empty movieclip?
View 3 RepliesI have a timeline and want to create an empty space to put in an additional timeline animation in the middle.
View 4 Repliesi am trying to load a list of jpgs in to flash using as 3. eventually i am going to tile them etc. but right now my script goes through my for loop and just replaces the image i previously loaded... in as 2. i of course would change the name and depth of these images as i loaded them but i am of course not using createEmptyMovieClip or loadMovie etc.. so i am a bit lost..
[Code]....
I am trying to create and delete empty movies that I can load external .swfs into. While the below works if I get rid of
var currentLoaded = "my_loader" + myNum;
I can't work out how to dynamically name the empty movies, as the below just comes up with errors. I'm pretty new to AS3 and stuck. Any ideas?
var myNum = 0;
var currentLoaded = "my_loader" + myNum;
function loadNew (myNum){
[code]....