how to do an object move towards the mouse when i move the mouse the towards the object and backwards when i move the move away, something liike the menu on [URL]
View 2 RepliesI'm trying to create a script that locates the objects location, and moves it smoothly out of location (but not out of stage) when the mouse is close. When the mouse moves away, the object should return to its place. I've really been searching for hours, and I cannot seem to find anything that works.
View 2 RepliesI am currently working on putting together a small game map, a map where a character can walk around and talk to NPC's and such. We've just started to I am pretty much just working with the basics here. Just started learning AS3 too. I have created an Object, in this case a circle that gets drawn when I run my AS code, the circle is drawn in the midde of my stage. What I want, since the game is Isometric and moves in those isometric lines rather than straight up, down, left, right, I want to make a funktion where, if the mouse is clicked at a location where both the X and Y coordinate is less than where the object is, then the object moves to that place.
The code I have, is as follows at the moment:
ActionScript Code:
var xNewPos:int;
var yNewPos:int;
var inTransit:Boolean = false;
[Code].....
Before I start I would like to point out Im new at actionscipt. I want to move an object from a to b on a mouse press using actionscript to ease out. The only threads I can find involve huge scripts I know it should only be a couple of lines!
View 1 RepliesI'm trying to figure out how to make an object move vertically or horizontally a set distance once the object has been mouse clicked and then stop. Sounds relatively simple, but I'm pretty clueless at it.
View 2 RepliesI'm making a custom slider component. The head (the thing that you drag) is programmed like this:
head.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
head.startDrag(false, new Rectangle(stubDiv,0,width - stubDiv - ((levels-maxLevel)*stubDiv),0));
[code]......
Ok I have this 100% width/height Flash embedded and when the user moves the mouse I want to display a panel, which disappears after x seconds if there is no more mouse movement.
I think I need an addEventListener, but I am not sure MOUSE_MOVE is the correct one. When the mouse stops moving I need to start x seconds to hide the panel, so I think with a timer?
[Code]...
I've seen couple of websites [URL]...in these websites the text & the objects move with the mouse moves. I just wanna know how to move the objects with mouse movement or you can say how to make an object follow the mouse (left-right-up-down)
P.S. In the 2nd website there's a 3d character also which I don't have in my project so there's nothing to worry about 3d in flash. I've just couple of images & text
I'm wanting to make a flash site using a layout similar to the following website:
[URL]
I would like to point out the features I'm interested in learning how to do:
1) The stage "scrolls" or moves to the left and right as the mouse moves to the edge of the screen accordingly.
2) There is no horizontal scrollbar in the web browser even though the flash stage seems to be very large horizontally.
How can i move an animation backward and forward with the movement of the mouse on the x axis? all of the mouse trailers etc move an object which is linked to the mouse. however i don't want my movie clip to move around the screen. I have an animation of a wave form which I've animated to look as if the wave is increasing and decreasing, ie its amplification. I'd like to move this animation with a mouse movement. ie move your mouse to the left and the wave form increases. move your mouse to the right and the wave form decreases.
I have made an attempt. but it is very clunky and the link with the mouse isn't exact. the animation of wave form moves only if the mouse moves to one side or the other. it's not instant, like the infinite menu.
here is my clunky code:
if (_root._xmouse>=300) {
_level0.animation.nextFrame();
} else {
_level0.animation.prevFrame();
}
i am trying to make a drawing board(like colouring book) where when i click and MOVE THE MOUSE it colours the object(more like a brush and not as a paint bucket)i would like to know how to colour objects individually(without coloring background) and the most IMPORTANT is there any way to detect what percentage of object had been colored(like if 100% of object coloured something happens!)
View 2 Repliesi'm attempting to make a platform game, i know how to move left and right with the arrow keys, but that's quite boring. i want to move my character based only on the x movement of my mouse. the more i move my mouse in a certain direction, the faster the character moves in that direction. i've been trying to modify the x-speed on my character based on a x value of the mouse, but nothing is working.
preferably, i want a code that keeps my cursor at the center of the screen, while still being able to detect x movements of the mouse. i'd copy paste code from my program, but i'm fairly confident that doing so will serve no purpose. i need a new direction. i have no idea how to do this.
making a game, and in html, on press arrow key up or down, moves the object and the screen
View 2 RepliesI'm trying to make some butterflies move around on a mouse over. The catch? I'm trying to get random movement but not in straight lines, rather I need curves (or lots of very short lines) as butterflies are not on rails. My AS is pretty weak in this kind of area (or any area)
View 2 RepliesI know this is very noob, but I need a simple AS move and loop. Move an object across the stage and once out of site, loop and start over again? It needs to be a slow and endless loop.
View 3 Repliesmake snap object on the mouse movement. As, I have made the code but getting issue on removing from snapping. I have attached the file. you can look in the [URL]
View 1 RepliesIt has been awhile since I have worked in flash.Right now I am working on something where I would like a panel to disappear when someone mouses off the stage.stage.addEventListener(Event.MOUSE_LEAVE, leaveHandler); It usually works fine but if I move my mouse really fast it doesn't fire. I have also tried the same thing using a custom invisible button that surounds the perimeter of the stage and I have tried ROLL_OVER and MOUSE_OVERand again, if I do it too fast my event doesn't fire (I am using trace)I can't find anything on the net about this - is this typical of flash that if you move your mouse too fast you break it? Do I need to increase my frame rate (I would really rather not because I have perfectly timed animations - I am at 30 frames per second)
View 1 Replieswhen the mouse rolls over an image, text appears (in a small rectangle) and it moves with the mouse, only while it is still over the image.
Or at least, does anyone know what this is called or how to do it?
As of Flash 10.2, Flash supports hardware accelerated mouse cursors:[URL]..Unfortunately, the mouse cursor doesn't update until AFTER the mouse moves. You can see this behavior on the web page above. If you click "Set to custom cursor" in the sample app at the bottom of the article, you'll see that the cursor doesn't change until you move the mouse.
Anyone have a trick for updating the mouse cursor immediately, before the user moves the mouse? I tried doing Mouse.hide(); Mouse.show(); but that doesn't work.
I am creating mouse scroller and when I insert actionscript my images wont move depending on the mouse movements..I am using Flash cs5 and Actionscript 2.0...this is my actionscript:
[Code]...
I am trying to have two guestures on a SpriteVisualElement which I thought should be pretty simple implemented: Mouse_Move for sweep Gestures and mouse click to enable.. So I have 2 Eventlisteners on my stage:
[Code]...
The main problem is that every type of sweeping on the screen also fires the taphandler().. how to identify the correct event? I tried to to my taphandler only if(!event.buttondown) but no success.
I started another thread where i had gotten help and combined the snow tutorial and the programatic mask tutorial to create particles that reveal an in-focus image over a blurred one. I just need help making the particles swarm around the mouse when it is present and have the particles just float around when not. Presently the random motion is just fine and looks like this (i just inverted the this._x and this._y so that they would go with the mouse direction not away from):
[Code]...
I'm wondering how is this task done that listen to mouse move event when user cursor is out of stage?
View 6 Repliesi am using this on Mc
onClipEvent(enterFrame){
diffx = _root._xmouse - this._x ;
diffy = _root._ymouse - this._y ;
[code]....
How can you restrict the mouse so that users cannot move their mouse into a certain area, (or a certain y or x value)? This is useful to me because I need it for a game.
View 2 RepliesIm in my final year of year 12 and need to have a car rotate in flash by either mouse movement or dragging by the user. Ive tried googling and being lower then noob level on adobe flash I have no idea about anything. I have created a car model in 3ds max. It is of high detail and I wanted to keep it that way. An example of what I wanted to create would be [URL]
View 1 RepliesI would like 2 objects that I can drag up and down indipendantly with the mouse (vertically only) between set limits. I would also like a line between the two objects that stretches like a piece of elastic.
View 9 RepliesI am trying to move a 'Shape' object across the screen. As the object moves, a copy is being left at the initial position. Almost as if only an instance of original object ahs been moved
This is not an issue for moving an image or MXML graphic. Is something wrong in setting to the move object?
The code is as follows
private var arrow:UIComponent;
private function resetAssets():void{
arrow = new UIComponent();
[Code].....
I'm still new to AS3, and I was wondering how to make an object point in the direction of another object and move towards it if they are a certain distance from one another. I haven't been able to find out how to do this from the Adobe devnet, so I thought I'd ask here.
View 1 RepliesI am having a major problem trying to move an object to another object with a set speed I want object1 to move towards object2 for collision. Right now I control object2 with my keyboard and I want the script to tell object1 to move towards object2.
View 2 Replies