I have a movie clip on the main timeline which is acting as a button, in the over state of that mc button are 3 regular buttons, which appear on mouseover the mc button, but do not hilite, and will not respond to a trace. the .fla is at [URL]
View 3 RepliesI have a movie clip on the main timeline which is acting as a button, in the over state of that mc button are 3 regular buttons, which appear on mouseover the mc button, but do not hilite, and will not respond to a trace.
View 3 RepliesMy movie clip doesn't respond to gotoAndPlay(1) command at all. Here is the situation: The Main.fla has a movie clip instance "Mov1" and the following AS3 code in the first timeframe:
function LoadSWF(Mov:Object, swf:String ):void {
fl_Loader = new Loader();
fl_Loader.load(new URLRequest(swf));[code]......
Once it's loaded it plays once (there is a stop(); at the end).So far so good but... the following code in the button script doesn't trigger any action at all:
Mov1.gotoAndPlay(1);
Any other code in that button works fine, so the button itself works ok.
if I attach two movie clips MC1 and MC2 on the stage.MC1 has a simple button also. MC2 is transparent.First I attach the MC1 and then I attach MC2. Both on the stage. So obviously, MC2 is added over the MC1. In this situation, I cannot click the button which is place in the MC1.If Im not wrong, in AS2, if the MC2 is transparent, the button in the MC1 can still respond to the mouse events.
View 1 Replieshow to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie
View 5 Repliesi have navigation menu animated click it pops up from corner to center click its gone and gotoandplay('page2') is triggered. while page loads menu goes away.
So my point is i want to show page title only after menu is gone (menu clip stopped playing) this works but menu is child MC i try put
[Code]...
but how i build event handler that constantly checks for this message?
i want ot no how to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie can you please help me.
View 5 Replieshere is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
How can I trace all available Movie Clip variables and functions?
View 5 RepliesI want to trace all the names of a Movie clip properties. Funny thing is that I used to know how to do that. Now when i use [code]It only traces the names of nested Movie Clips not also properties like _x, _width. Anyone knows how to do that?
View 1 RepliesIt's about targeting movie clips... In AS2, you just target a movie clip like so :trace (FirstMc.ChildMc1.ChildMc2.ChildMc3._x) // Will send out the x position of ChildMc3 But is AS3, i see that there's a function called getChildByName('put child name here'). But what if it's such a long way to go to that child??? Does it have to be:
FirstMc.getChildByName("ChildMc1"). getChildByName("ChildMc2"). getChildByName("ChildMc3").x
That just seems to tedious and I'm sure Adobe thought of a clean way of targetting??
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesI've been scouring the internet for the past hour or so in search of how to do this. It's very simple, but every example seem to want me to bring a loaded movie clip, or trace mouse position. I don't need that! Basically I have a button that when clicked comes to the front (using behaviours), moves to a new position, scales and then I want every other button behind it to blur. Obviously I want them to blur gradually to keep the flow going. Here's my current code so you can see where its going:
[Code]...
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
Basically I have a series of animated movie clips that need to play when they are triggered by a button (button 1)....
(This bit I can do...But the next bit is tricky:
Then, the animated movie needs to rewind, when the button (button 1) is clicked on again, or triggered by clicking another button (button 2). - I have also figured out the rewind part using a movie controller [code]...
I used the Kirupa Tutorial for Advanced Rollovers to create my navigation menu and within one of the movie clips I have additional buttons that show up on the roll over.I know that you need to place the onPress code on the frame that the buttons actually live. I have a trace("mix_btn: "+mix_btn); to find out if the button is being found.
My problem is that I dont know how to get the code below to actually dynamically load and external SWF into a container on the main timeline. A friend of mine suggested a MovieClipLoader or onLoadInit Handler but I have no idea how to use those. (I'm a noob and proud of it!). (this is my latest version of a onPress.)
Code:
mix_btn.onRelease = function() {
_root.createEmptyMovieClip("container", getNextHighestDepth())
loadMovie("musicMixes.swf", container);
[code]....
In my main timeline, I have an image fade in and stop on frame 61. On Frame 61, the code below executes;
Code:
stop();
var placesXML:XML =
<places>
<place name= "Bengkulu">
<frame>63</frame>
[Code] ....
There are no output errors, or compiler errors, yet when I click on one of the buttons, the movie does nothing - it certainly does not gotoAndStop on frame 62, 63, or 64 as I am asking it too. Before this code, there are no other actions at all in the movie - just a simple fade in image.. I have now tried tracing (the objects below), within the click handler curly braces (showData);
'xmlData' produces nothing in the Output
'xmlFrame' produces '0' on each click in the Output window.
Tracing both the above outside of the showData function curly braces produces;
1120: Access of undefined property of xmlFrame, or xmlData.
Tracing the nameBtn[i] produces '[object SimpleButton]' in the Output Window.
I'm trying to get buttons to redirect the user to another part of my site. However, the button is in a movieclip and won't work. URL..I've been trying to get it working for ages and it just won't work. I've even made other buttons (as you can see on the site), and they work!
View 1 RepliesI have a movie clip & inside that movie clip, some Images are moving around the stage. I want these images to act like buttons, so that when we click on them we can go to URL link. First I stopped my movie clip on mouse rollover, which is working fine & for buttons I converted these images to movie clip ( yahoo_mc) & gave action Script
on (release){
getURL("http://www.yahoo.com ", "_parent");
}
[code]...
From one main movie, I'm calling a movie, put it into a target (everything goes fine here), then when I call the movie everithing goes fine but the elements inside the movie don't respond I'll tell you how it works. The loaded movie, has a movie clip that plays a few others clips in the main time line. When this movie get loaded into the main movie I mentioned above these few clips don't work, I see the movie getting loaded but these few clips don't work.
View 2 RepliesI imported the .MOV clip (a 3D rotation) into the library, and I would like to be able to control where the rotation stops, by use of a slider or clicking a button
View 4 RepliesI'm trying to put buttons on an intro movieclip for a game and I keep getting errors saying they are undefined like this: 1120: Access of undefined property.
View 4 RepliesI have 3 layes in my file, the first one has a movie clip, the 2nd has few buttons and the third has the background image. When i rollOver the first layer with the movie clip, it zoom the entire movie. if i rollOut then it zoom out. the problem is that the buttons behind this movie clip don't work. They are placed in the layer under the first layer with the movie clip. Is there any way to make these 2 layers work, the movie clip and the Buttons? The layer with the movie clip need to be at the top. I am working with AS3. if you have any idea please let me know.
View 2 Repliesusing AS2, I need buttons inside a movie clip to jump to a particular frame in the scene.I've got the obvious:
on (press) {
gotoAndPlay(15);
}
I just don't know how to tell it to affect the scene and not the movie clip.
I have created several buttons using movie clips with animations and the 'rewind=true'method when someone mouses off. What I am wondering is, if I have 2 buttons on the stage and I want to animate both of them if one or the other is moused over at the same time, how can this be accomplished
View 1 RepliesI'd like to know if it's possible to have several buttons in a single movieclip that can interact with things outside of that movieclip? An earlier test failed due their instance names not being found, I'd like to think it were possible though.
My reason for asking is that I'd like to control the visibility/position of a large group of buttons simultaneously via AS3 while keeping to a single frame.
script that would allow the user to clikc and drag mulitple symbols- similar to this:
on (press) { startDrag (this._parent, false);}
on (release) { stopDrag ()}Only that instead of using "this", it drags the following symbols on mouse click:
background (a movie clip)[code]..............
I have a screen with transparency that pops up over a movieclip full of buttons.I need to disable the movie clip and/or buttons so they don't function when the pop up comes up.Can't get it to work with this code:
myMC._enabled=false;
or
myMC.myBTN._enabled=false;
[code].....
Having a bit of a problem with a project. At the moment I have a draggable map which is a movieclip, within the movieclip I have added a range of icons for hotels, restaurants, etc.I am having a problem linking these icons so that they will take you to the correct point on my main timeline. I've converted the icons to buttons and added the script below, but it doesn't seem to be picking up that the icon is a button. I think it may have something to do with it having a start/stop drag on it.
View 4 Replies