I have a problem about my scriptI am doing a image slide which moves from right side of the screen to the left side of the screen at all time. The Slide is about 1000 pixel, within the Image Strip I have 5 images that are buttons. I want to be able click on the image and make the slide to stop.
//In the strip moive clip I have:
onClipEvent(enterFrame){
this._x -= 5;
[code].....
I am creating a flash slide presentation to use as part of an online portfolio. I have created a presentation that so far has three slides, each containing a flv that I imported and added a skin to.Is there any way to stop the movie on slide one (besides manually) when I move to slide two? I don't care if the mvie returns to the begining or not i just want to beable and view the video on slide two without hearing the sound from slide one.
View 5 Repliesi have a one web link have a flash display, below the flash display some scrolling picture, when we click the image that image goes up, as well as left and right have forward & backward button, how can i do this type of flash file,
View 2 Replieswhat i have is a tween on a movie clip of a popcorn kernel on one layer and a tween on a button on another layer to follow the movie clip. i want to be able to roll over the kernel and make it "pop". i changed my over on the button to popped corn (this works) but i want it to stay popped for the rest of the tween.
View 11 RepliesI can't seem to find a clear explanation specifically relating to forwards/backwards tween with buttons.
I have a menu bar that I want to slide down, on Rollover and slide up, on Rollout... and have buttons on it/or appear on it.
So if someone wanted to navigate around the movie they would move their mouse to the top right, a bar would slide down and then they could access the buttons on it. However if the mouse is rolled off at any time the bar slides back up.
I've managed to get the bar sliding up and down but my problem is with the buttons. When the mouse rolls over the buttons that have loaded in front of the menu bar, the bar flickers... I guess because the menu bar can't see that the mouse is still rolledover, when the mouse is over the button in front of it.
I was thinking that the code could tell the MC containing the menu bar to pause when the buttons are rolled over - but I may be barking up the wrong tree.
I've attached my fla/swf to show the simple example of where I'm up to.. it may have been overcomplicated by my attempts to load the buttons on frames of the tween.
I currently have a slideshow working with prev and next buttons, but would like to add numbered buttons for each slide at bottom of images, with a static number for the active slide that has a colored circle around that number.
I can create static number with colored circle in Photoshop and add that to a layer, but it's labor intensive to do that for all numbers.
Is there a better way to create the highlighted numbers for active slide?
For numbered buttons that link to non-active slides, I can create numbers in Photoshop and import images into Flash, then convert to symbols and assign actions for them, But that too is labor intensive to do for all the numbers.
Is there a better way to create numbered buttons for non-active slides?
I'd also like to have a hover function on the numbered buttons, that changes from plain image of number to number with colored circle like I want to use for active slide.
How do I assign a hover function to button symbol, that will load another image or symbol?
I am looking to create a flash based image slide show, but have some restrictions. Can't use XML to store the images, b/c this is going into powerpoint, and the client uses an older version which doesn't support external files. Also, this won't be advanced by a button, click, but will need to be timed between transitions. There is voice-over, music involved so the transitions times may not all be the same. I did a Google search, but every example involved XML and/or button controls.
View 3 RepliesI have a line of 12 horizontal placed buttons. I want whatever button is rolled over to get larger (no problem), but I need the other buttons to slide over to allow for the new size that the larger one would bring. I have no idea what type of code I should be looking for here.
View 1 RepliesI am using currentSlide.gotoNextSlide to change between slides, however I can't make it stop playback on load of each slide.I have a motion tween with I need to NOT play automatically when the slide loads... but no matter how many iterations of stop(), gotoAndStop(), etc I use, nothing will stop the clip from playing when it is loaded!
View 1 RepliesHow could I get a nice tween like this one: [URL] Specifically the now playing slide in and slide out effect.
View 1 RepliesI have a panorama which I've coded to move back and forth horizontally when I press the arrow keys. I'm trying to get some buttons to sit at designated points across the panorama.I'm having trouble getting them to stick at the right places, though, instead of roaming around. Right now, I'm focusing on Norris_btn (although Annenberg_btn doesn't work right now either), which starts out in the right position (all the way at the far left of the panorama, which is 10061 px wide). However, if I scroll all the way to the right and then try and go back to the left, Norris_btn appears in the wrong place. Here is my code:
Code: Select allconst PANWIDTH:Number=10061
const STAGEWIDTH:Number=650
const KEYWIDTH:Number=40
[code].....
I have 3 buttons in my movie and description for each button in the right side box like in the diagram.
bt_about, bt_profile, bt_contact
Now when I click on about - the about button should move from the stage and profile and contact button should move to the first and second place with an easing movement.
Same in case I click on profile - the profile should move out of the stage and other 2 buttons should come to the first and second position with an easing movement.
I tried this with creating number of movie clips with each possibilities etc.. but it is not going to happen...
this is what I am trying to do:
1st slide: pre test (3 radio buttons)
2nd slide: video
3rd slide: post test (3 radio buttons) - this page has a submit button that calls a .php script
The Pre Questions are setup like this:[code].....
wondering if this is a Global Variable problem? Is there any reason that the "variables" variable would stop populating after the first slide? Obviously, they are getting to the last slide since the submit button is passing them (or is the external file doing it?), but don't know why the post ones are not going.
the part i am trying to create is the non-moving buttons. when u click on it, it brings the content up and when u click on the icon it goes back to the carosel (rotating menu) how do i create that?bascially it should do the same action as the carousel buttons do.i have already created the carousel and the text buttons but i just th linking the text buttons to the content, the content is inside a movieclip.
View 9 RepliesI'm currently working on a GUI design and for the options, instead of a slider I want a movie clip that fills 5 boxes or empties the boxes when i hit the plus or minus buttons I've made. I created a movie clip called bars which has 6 frames. Then I made an addbar button and a subbar button. I then created a movieclip with all three items inside of it called gauge. I set the actionscript to the gauge movie clip. This is what code I have in currently. When I play the swf the boxes remains empty and will not move through the movie clip of bars like I want.
guage.jpg (23.8 KiB) Viewed 231 times
can anyone take a look at this .fla, and tell me what code needs to be applied to the arrow buttons?
View 7 RepliesI am designing a site with four "pages" each page is on a different frame of the same timeline. I have four navigational buttons for each frame. I have a movieclip in the shape of a small triangle that indicates which button has been pressed. On the initial load of the site the arrow(triangle) is not shown on the "home" page. I would like for the arrowmc to show under the button that is pressed, then when another button is pressed the arrowmc would slide under that button. Say I press button A then button D the arrowmc would slide horizontally underneath button D. I think I need a function call for each onPress event but telling the movieclip which button to slide under is what is stumping me.
View 1 Repliesmy picture section includes an MC slide show with "next/previous" buttons.
is there any way:
1- to make this MC calls JPG pictures from a directory.
2- make them autofit inside the mask.
I'm trying to create a movie clip with images that will slide from one image to another using next and previous buttons. I want a sliding effect. For example on this site: [URL] The right side large image you can slide the image by using the arrows. That's exactly what I want...but in flash.
View 3 Repliesi'm new to these forums and relatively new to AS3 so bare with me basically i have designed a 360degree flash applications using a movieclip that pans a panoramic photo when the mouse moves left or right. I am now having trouble fixing buttons onto the correct place in the scrolling 360 clip because i can't fix the buttons to a specific point (x + y) on the image itself.
View 2 RepliesI have created a button which contains a movie for each county, when a user rolls over it pops out and displays a list of names. The problem I have is each button is on a layer and when you roll over the bottom button it's hidden below the others. Is there a script to bring each layer to the front automatically? I'm new to flash so if possible could you please explain in layman's terms.
View 6 RepliesI am doing a project at school which is based on google street veiw for the inside of school to enable people to have a look around the school online,I have succesfully managed to make a UI and put a 360 degree panorama of the corridors in school behind it which you can drag and drop left and right, which then loops around to the beginning when you reach the end of the panorama.My problem is that I want buttons on the doors of the corridor that you can click on to get a veiw of inside the room, but since the background is movable I need all of the buttons to move with the corridor,.
View 3 RepliesI'm somewhat stuck in a project that I have to deliver next Friday. Thing is... I've got to code a webpage like The Killers Band webpage with a panoramic picture moving according to your mouse movements.
I've tried several things already, but I had no success yet. (Everything must be coded in AS2.0, and I'm using Flash CS3 to cover the project).
All I have is the panoramic picture, which I might be able to upload if you ask me to.
Additional info:
I've already converted the background picture into a movie clip symbol. Also, if I ever have to send the picture to anyone, I'll send it as a Private Message, since I can't post links yet.
I'm using Adobe Flash CS3 / ActionScript 2 to develop a site, the relevant part of which can be seen at [URL] The black boxes underneath the 2x4 grid of icons are placeholder graphics for left and right arrows which move the icons above to the left and right. The left and right buttons work, after a fashion, but I'm having difficulty controlling the motion. As each button is pressed, I want to reveal one more layer of icons, and have the scrolling stop when the end of the list is reached. At the moment, one can use the buttons to scroll the icons off the screen.
Secondly, if the left / right buttons are clicked in very quick succession, the icons above do not display correctly - they're no longer centred in the mask above. Is it possible to have the buttons 'ignore' any clicks whilst the icons above are moving, thus ensuring that the icons always display correctly? Finally, is it possible to have the left/right button disappear as appropriate when the left/right hand end of the menu is reached? Here's the code I've been using to control the motion:
[Code]....
[flash 8]
[URL]
I make your object move with your tutorial,but Icant move my own object,
Bonjour my friends, I have just gotten my hands on Adobe Flash CS4 and while I am rather please with my own ability to use the tools, as I've taken several vector art classes at my local community collage, I simply can't seem to get my head around the Actionscript part, while I completely understand it's purpose and capabilities, and have actually looked at several of the tutorials on this board, I still find myself with many questions.Chief among which would be...Is there a way to make an object move vertically a certain amount, each time you click a button, while preventing it from moving farther than a maximum number?- I looked for something like this in the tutorials, my aim simply being to create a sort of scrolling text box via masks and buttons, but all the tutorials were either far too complicated or required vast set up that would require me to take several steps back from my current location.
Also, is there a way to make the animation start on a frame other than frame one?- It was my understanding that one could simply put in a gotoAndPlay(#); code on frame one and that should cause it to go to and play from whatever frame you specify but that seems to be incorrect as it hasn't worked. Other questions I have include..Is there a method by which one could create a sort of slid show, within another scene? IE you're at scene X and you click a button, and a picture that is part of, but not all of, scene X changes to something else, while the rest remains the same.
Basically I have button contained in a movie clip (scroller), I want to be able to drag the button up and down and get this to move some dynamic text. If you want to have a look at the fla: [URL].
Code:
on(press){
_root.nFlag = true
}on(release){
_root.nFlag = false
}
And this code for the mc:
onClipEvent(enterFrame){
if(_root.nFlag){
if(_root._ymouse <= 400 && _root._ymouse >= 0){
this._y = _root._ymouse
}}}
My problem is that this only moves the button up and down, and doesn't move the dynamic text. Plus when the mc is named scroller it seems to conflict with code and moving the button doesn't work.
I have seen instruction on event listeners to get a button to go to a URL or to make a movie pause and whatnot, but what I'm not finding is instruction on how to write the AS3 for a button that simply moves you to a new page within the site itself. Also, if it's a "goto" script, the page that I want it to go to, does that have to be a new scene? If so, how do I merge two scenes together? Essentially, you can look here for what I am trying to accomplish. [URL]
What we want to happen is when let's say the direct marketing button is clicked, we want the other buttons to slide offscreen the way they slid on screen and then a new set of buttons pertaining to the direct marketing will appear at the bottom the way the original buttons appeared at the beginning. Do I need to make these buttons sliding away and a new set of buttons sliding in on a new scene? How do I link the scenes together?
I'm trying to create a portfolio website, and I want my picture strip to move in and then become buttons. I have made them buttons, but once the strip stops moving I keep getting this message.
[Code]...
Here're my 2 problems: 1-I did a menu moving in 3d following my mouse movement. But i would like it to have a limit of rotation on the left and on the right, cause i don't the user to see the back of the image (the image is rotating 360 right now, i would like it to rotate maybe like 90 or less). Here's the code i am using:
[Code]...
2-My second question is about my menu buttons. I want them to be on lower layer cause it help creating my 3d scene cause sometimes it is a part cover by my image on the top. But the buttons stop to be clickable when they are behind something (even a part behind). I want them to be clickable at all time. The strange thing is i checked out in the forum and a lot of people have the opposite problem... their buttons still work. How can i make mine clickable?